GOODWE GM1000D Smart Meter User Manual
- June 13, 2024
- GOODWE
Table of Contents
Smart Meter
USER MANUAL
INTRODUCTION
Good We Smart Meter is designed with high precision small dimensions,
convenient operation and installation.
It is available for both single-phase grid system connection to detect
voltage, current, power and energy, for working with inverters including SEMS
systems for the purpose energy management.
Any fault or damage caused disoperation or disobeyed against the rules on
manual is beyond Good We warranty cover range.
PACKING LIST
- 1*Smart Meter
- 1*Screw Driver
- 2*CT(Current Transformer)
- 8*Cable Connection Terminal
- 1*RJ45-to-Pin Cable[1]
NOTE:
[1] Only suitable for RS485 cable connection on RJ45 port of Good We hybrid
inverters.
OVERVIEW
2.1 SMART METER OVERVIEW
2.2 CT OVERVIEW
INSTALLATION INSTRUCITON
3.1 INSTALLATION ENVIROMENT
Protection Class: IP20(for indoor use)
Operating Temperature： -25℃~+60℃
3.2 INSTALLATION (WITH DIN TRACK)
- Pull to release the retaining clip
- Mount the HomeKit on the track and push the Retaining clip up(a click sound indicates it is installed well) USB Reset
3.3 WIRING CONNECTION
Correct direction of CT: House (K)→Grid(L).
Incorrect connection or direction will cause incorrect data.
ELECTRICAL DATA
| MODEL | GM1000D |
|---|---|
| APPLICATION | Single-phase |
| Voltage | Nominal Voltage |
| Voltage Range | 100V ~ 240V |
| Frequency | 50Hz/60Hz |
| Current Input | Nominal Current |
| Current Range | 0.48A ~ 120A |
| Self-Consumption | 3W max Voltage / Current / Active Power |
| Data Detection | / Reactive Power / Power Factor / Frequency |
| Energy Calculation | Active / Reactive Power Energy |
| Precision | Voltage/ Current |
| Active Power | Class 1 |
| Reactive Power | Class 2 |
| Communication (With inverter) | RS485 (Bund Rate 9600 / ModBus Protocol / |
communication cable max. length 100m)
Weight| 360g
Altitude| ＜2000m
INTERFACE
5.1 INDICATIONS
-
Power LED:
Normal status: ON -
Energy Consumption LED:
Consuming: ON
Generating: Blinking -
Communication LED:
Transmitting data: ON
Resetting: Blink 5 times
5.2 RESET SWITCH
| Press | Function |
|---|---|
| <3s | Meter reset |
| 5s | Meter settings initialization |
| ＞10s | Meter initialize settings and clear energy data |
5.3 USB PORT
For after-sales maintenance.
340-00341-01
No. 90 Zijin Rd., New District, Suzhou, 215011, China
service@goodwe.com |
www.goodwe.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>