anko 43314294 LED Disco Ball Light Instruction Manual

anko 43314294 LED Disco Ball Light

Product Information: LED Disco Ball

The LED Disco Ball is a lighting device that creates a disco-like atmosphere with colorful lights. It features a built-in microphone for syncing the lights to the music being played. The product is designed for indoor use only and comes with a USB-DC cable, stand, two screws, and a remote control.

Product Usage Instructions:

1. Attach the stand to the light using the provided screws.
2. Place the light on a desk using the stand or mount it on a wall using a screw.
3. Connect the USB-DC cable to the power supply port on the light.
4. Plug the USB cable into a free USB port or a USB wall charger with a 5V 1A output.
5. Insert 2 x 1.5V AAA batteries (not included) into the remote control.
6. Use the remote control to control the disco ball lights.

Note: Please read the product manual carefully before use. Avoid touching the power supply or power cord with wet hands. Only use the included cable for connecting the light. Clean the product using a microfiber and dry cloth. Take care to prevent any damage by dropping or physically shocking the product. Avoid exposing the product to excessive heat as it may cause malfunction. The light source of this luminaire is not replaceable.

Battery Installation (For Remote Control):

This item requires 2 x 1.5V AAA batteries (not included). An adult should handle the battery installation.

BATTERY WARNING:

Follow proper battery installation procedures and dispose of used batteries according to local regulations.

Instructions

• Please read this product manual carefully.
• Do not touch the power supply or power cord with wet hands.
• Only use the included cable with the light.
• Use only a microfiber and dry cloth for cleaning the product.
• Operate carefully to not cause any damage by dropping or physical shocking it.
• Do not leave the product in excessive heat, high temperatures can cause the product to malfunction.
• The light source of this luminaire is not replaceable.
• When the light source reaches its end of life, the whole luminaire shall be replaced.
• If the external flexible cable of this luminaire is damaged, discontinue use.
• There’s a built-in microphone inside the product, please place your music playing device near the product for better results.
• For indoor use only.
• Cable only uses for connectting 43314294 led disco ball product.

Packing list

Remote control function

Battery Installation (For Remote Control)

This item requires 2 x 1.5V AAA batteries (Not included).
Battery installatIon by an adult is required.

BATTERY WARNING

• This item requires 2 x 1.5V AAA batteries (Not included).
• Battery installation by an adult is required.
• Ensure batteries are inserted with the correct polarity.
• Do not mix different types of batteries or new and used batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the product before being charged.
• The supply terminals are not to be short-circuited.
• Remove batteries from the product when not in use for extended time or when batteries become exhausted.
• Dispose of batteries responsibly.
• Do not dispose of in fire.

How to use

1. Use the provided screws to attach the stand to the light.
2. Use the stand on the desk or use a screw to mount on the wall.
3. Use the USB-DC cable to connect with the supply power port.
4. Plug the USB cable into a free USB port or USB wall charger with 5V 1A output.
   Use the remote control to control the disco ball.
   Note: Before using remote control, please insert 2 x AAA batteries (Not included).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>