CLAS OM 0020BL_NO_B Slide Hammer Set + Injector Extractor Adaptors Instruction Manual

: June 13, 2024
: CLAS

Table of Contents

CLAS OM 0020BL_NO_B Slide Hammer Set + Injector Extractor Adaptors
Product Information
Product Usage Instructions
SAFETY
SPECIFICATIONS
Contents
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CLAS OM 0020BL_NO_B Slide Hammer Set + Injector Extractor Adaptors

Product Information

The product is a set that includes a slide hammer and injector extractor adaptors. It is designed for the purpose of extracting injectors from vehicles. The set consists of 14 pieces.

The product is manufactured by CLAS Equipements, located in Chignin, France. The company can be contacted via mail at sav@clas.com or by phone at +33(0)4 79 72 69 18. More information can be found on their website, clas.com.

The product also includes a metal transfer pump, model HU 0014BL. This pump is used for transferring metal substances.

Product Usage Instructions

Before using the slide hammer set and injector extractor adaptors, it is important to read and understand the safety instructions provided in the manual.
Always refer to the vehicle manufacturer’s service instructions or a proprietary manual to establish the correct procedure and data for extracting injectors.
Ensure that you have all the necessary components and parts included in the set before proceeding with the extraction process. If any components or parts are missing or damaged, please contact the reseller for assistance.
For any issues or problems encountered during the usage of the product, it is recommended to contact an authorized technician for assistance.
If you need to transfer metal substances, use the HU 0014BL metal transfer pump included in the set. Follow the specific instructions provided for operating the pump safely and effectively.
Always handle the product with care and use it only for its intended purpose. Failure to do so may result in damage and/or personal injury, which will invalidate the warranty.
If you have any questions or need further assistance with the product, you can contact CLAS Equipements through their provided contact details.

WARNING

Before returning this product for any reason (installation problem, instructions for use, breakdown, manufacturing problem…), please contact us.
You can reach us by mail sav@clas.com or by phone +33(0)4 79 72 69 18 or go directly to our website clas.com
If you have changed your mind regarding your purchase, please return this product before you attempt to install it.

SAFETY

Important:please read these instructions carefully. Note the safe operational requirements,warnings, and cautions. Use this product correctly, and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty.

WARNING!
Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.

× DO NOT use tools if damaged.
√ Maintain tools in good and clean condition for best and safest performance.
√ If the vehicle to be worked on is raised, ensure that it is adequately supported with axle stands or ramps and chocks.
√ Wear suitable clothing to avoid snagging. Do not wear loose jewellery and tie back long hair.
√ Account for all tools and parts being used.
√ If working off the vehicle, ensure that the workpiece is secure and stable.
× DO NOT use this tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.

* IMPORTANT: Always refer to the vehicle manufacturer’s service instructions, or a proprietary manual, to establish the current procedure and data. These instructions are provided as a guide only.

SPECIFICATIONS

Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors;
Ball joint allows hammer to be used in confined areas;
Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector.