G3 FERRARI G90032 Ash Vacuum Cleaner User Manual
- June 13, 2024
- G3 FERRARI
Table of Contents
MOD.: G90032
MANUALE D’USO
USER MANUAL
Technical model: K-408
Aspire Centre Ash vacuum cleaner BRAGIA
PROTECTION CLASSES
WARNING
ELECTRIC SHOCK RISK
DO NOT EXPOSE TO RAIN OR MOISTURE
This symbol warns the user that un-insulated dangerous voltage inside the
system may casein electrical shock. Do not open the case.
Class II Appliance symbol. The double insulated electrical appliance is one
which has been designed in such a way that it does not require a safety
connection to electrical earth/ground.
Caution: this symbol reminds the user to read carefully the important
operations and maintenance instructions in this owner’s guide.
SAFETY INSTRUCTIONS
The following are important notes on the installation, use and maintenance;
save this instruction manual for future reference; use the equipment only as
specified in this guide; any other use is considered improper and dangerous;
therefore, the manufacturer cannot be held responsible in the event of damages
caused by improper, incorrect or unreasonable use.
Before use, ensure the equipment is undamaged; if in doubt, do not attempt to
use it and contact the authorized service center; do not leave packing
materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within
the reach of children as they are potential sources of danger; always remember
that they must be separately collected. Make sure that the rating information
given on the technical label are compatible with those of the electricity
grid; the installation must be performed according to the manufacturer’s
instructions considering the maximum power of the appliance as shown on the
label; an incorrect installation may cause damage to people, animals or
things, for which the manufacturer cannot be considered responsible thereof.
If it is necessary to use adapters, multiple sockets or electrical extensions,
use only those that comply with current safety standards; in any case do not
exceed the power consumption limits indicated on the electrical adapter and /
or extensions, as well as the maximum power shown on multiple adaptor.
Do not leave the unit plugged; better to remove the plug from the mains when
the device is not in use.
Always disconnect unit from power supply if you leave it unattended, or before
mounting and dismounting.
Cleaning operations should be carried out after unplugging the unit.
If the unit is out of order and you do not want to fix it, it must be made
inoperable by cutting power cord.
- Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.
- Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center.
- Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc.. Always store it in a dry place.
- Children must not play with the appliance.
- This appliance can be used by children of 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning use of the appliance in a safe way and understand hazards involved; children shall not play with the appliance; cleaning and user maintenance shall not be made by children without supervision.
- Keep the appliance and its cord out of reach of children less than 8 years.
- Not for commercial use. Household use only In case of failure and / or malfunction do not tamper with the unit; to repair the appliance, always contact the service center authorized by the manufacturer and request the use of original spare parts; failure to comply with the above may compromise the unit safety and invalidate the warranty.
- This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments.
- The appliance is not intended to be operated by means of an external timer or separate remote-control system.
- Before every use, unroll the power cord.
- Use original spare parts and accessories only.
- Do not subject the product to strong impacts, serious damages may result.
GENERAL INFORMATION
Do not vacuum sharp objects, liquids, flammable, explosive or hazardous to health materials, acids, combustible objects such as cigarettes or firebrands.
- If you need to remove or change a filter, ensure to assemble it properly and that the filter is not wet or damp. In this case, wait for it to dry completely.
- Do not expose the appliance to high temperatures and do not bring it closer to heat sources.
CAUTION: while the unit is running, do not approach the air inlet to the ears, eyes, or to fragile items such as vases, tools or electronic equipment.
- Never leave the appliance unattended while it is running. Always use power button to turn it on or off.
- In case of overheating, or if the unit produces smoke, smell or unusual noises, turn it off immediately and check that the pipe is free from obstacles. If the tube is free, contact the service center to fix it.
- To avoid damages to the power cord, do not step on it.
- Disconnect the plug from the electrical outlet immediately after each use. It is recommended to wind the power cord in order to ensure a better cleaning of it and to avoid any risk of damage.
- Do not immerse the motor unit in water or other liquids; clean it with a damp cloth.
- Do not turn it upside down especially when there are some liquids inside the container.
Do not use the unit without filters: this can seriously damage the motor
avoiding the warranty.
DESCRIPTION G90032
- Aluminum pipe
- Flexible hose
- Suction hole
- Locking tabs
- Motor unit/head
- ON / OFF switch
- Metal tank
The spare part kit for this vacuum cleaner is model G3Ferrari G90033 and includes:
- 1 rounded metal filter suitable for vacuuming ashes
ASSEMBLING
Start assembling the unit only when the appliance is disconnected to the electrical outlet.
- Before use, it is necessary to assemble the appliance, do not connect it to the power outlet.
- Remove the cover unit (5) lowering the locking hinges (4) of the cover (Figures 2 and 3).
- Take out all the components and accessories which are stored inside the tank (Figure 4).
- Check that the filter is stable and properly mounted to the underside of the lid. In the event that the filter is not stable or is not correctly installed, fix it by following the instructions in the paragraph “FILTER ASSEMBLY” on the next page of this user’s guide.
- Replace the cover (5) on the container (7) of the vacuum cleaner, aligning the hinges (4) with the notches on the lid and fasten the cover by closing the hinges. Assembling the accessories by following the steps below:
- Fit the flexible hose (2) to the suction hole (3) by pushing the end of the tube into the pipe and then turn it clockwise
- Insert the aluminum pipe (1) in the end of the flexible hose (2).
OPERATING
Push the ON/OFF button (6) to switch on or off the unit.
Check that the filter is correctly fitted. After having assembled the unit,
plug the appliance, turn it on and start vacuum cleaning.
Warning: This product is not suitable for the suction of sharp or pointed
objects, flammable, explosive or hazardous to health, acids, combustible
objects such as cigarettes, burning embers, matches or ashes.
FILTER ASSEMBLY
This appliance does not work without the filter properly assembled on the machine.
- Turn the head (5) of the product upside down and insert the metal pivot (if present) at the center of the lower part of the head, in the filter you are going to use, as shown in Figure.1. Push the filter to the end and take out the support shown in the figure.
- Insert metal pivot into the hole in the center of the support (Fig. 1).
- Fix the filter with the nut by screwing the fixing nut on the end of the metal pin that comes out from the support, as shown in Fig 2.
MOTOR PROTECTION DEVICE
The motor is protected by a device, which comes into action when the motor is
overloaded due to a filling of the air flow (dirty filter, accessories blocked
by an object, overflow). It may happen that the protection device
automatically switches off the product. In such a case, wait for the complete
cooling of the engine leaving it switched off for about 20 minutes before
operating the appliance again.
CAUTION: If the motor emits a sound different sound or noise, more
intense and more acute, IMMEDIATELY turn off the power and check out the
reason why the protective device turned on:
If the container is full, empty the container. If the filter is very dirty,
clean it. If something blocks the attachment, remove the obstacle
MAINTENANCE AND CLEANING MAINTENANCE
The filter should be cleaned periodically. In addition, the filtering
efficiency can run out over time. It is advisable to replace the filter after
50 hours of use approx.
Do not operate without filter. When one of the filters runs out or breaks, it
must be replaced. Always ask for original spare parts; the filters kit is
model “G3Ferrari G90033”.
FILTER CLEANING
The filter should be cleaned periodically when dirty to guarantee the best
performance of the appliance.
Remove it and rinse it in warm water. At least dry it before assembling.
INNER TANK CLEANING
Unhook the body and remove the dust bag, if it is mounted. It is recommended
to empty the trash container before reaching the maximum capacity, as to
prevent the engine from overheating. In any case, empty the tank when you hear
a change in the sound emitted by the device. After having drained, directly
rinse it with water to complete cleaning.
GENERAL CLEANING
Before carrying out any cleaning operation, make sure that the plug is
disconnected from the electrical outlet.
Clean the body of the product with a damp non-abrasive cloth, avoiding the use
of aggressive detergents or abrasive cleaners, which could ruin the aesthetic
parts of the device. The cloth should not be too wet, because if the water
penetrates into the motor unit can seriously damage it.
STORING THE UNIT
Wait until the complete cooling of each part. Disconnect the power plug, rewind the cable and hang it on the hook on the head of the product. The hook supplied with the unit, must be fitted around the aluminum pipe (1). Once finished the use, fit the appropriate snap hook on the product to bond pipe and hose to the machine, so as to store the unit in a small space.
TECHNICAL FEATURES
- Power supply: AC 220-240V~50-60Hz – Power: 800-1200W
- Tank capacity: 18 litres
- Accessories: flexible hose, aluminum pipe, filter with metal net.
- Motor protection device
WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
**** The product is made of non-biodegradable and potentially polluting
substances if not properly disposed of; other parts can be recycled. It’s our
duty to contribute to the ecological health of the environment following the
correct procedures for disposal. The crossed out wheelie bin symbol indicates
the product complies with the requirements of the new directives introduced to
protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and
must be properly disposed at the end of its lifetime. If you need further
information, ask for the dedicated waste disposal areas at your place of
residence. Who does not dispose of the product as specified in this section
shall be liable according to the law.
To find the nearest service center, please call the telephone number 0541
694246, fax number 0541 756430 or contact us at
assistenzatecnica@trevidea.it asking
for the service centers supervisor.
Appliance is conform to the pertinent European regulation and is therefore
marked with the CE mark.
www.g3ferrari.it
TREVIDEA S.r.l.
TREVIDEA S.R.L. – Strada Consolare Rimini – San Marino n. 62 – 47924 –
RIMINI(RN) – ITALY
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>