Roll Hill 18AUG2022 Geode Three Layers of Solid Hand-Blown Glass Instruction Manual
- June 13, 2024
- Roll Hill
Table of Contents
Roll Hill 18AUG2022 Geode Three Layers of Solid Hand-Blown Glass
Product Information
Component | Quantity |
---|---|
8-32 Screws | x4 |
Wago Connector 2 | x4 |
8-32 Set Screw | x1 |
Wago Connector 3 | x1 |
Hex Key | x1 |
Crossbar | x1 |
240V screw kit | x1 |
#8 wood screws | x3 |
8-32 pan head screws | x3 |
318-8 machine screws | x1 |
8-32 Toggle Wing Anchor | x1 |
Product Usage Instructions
-
Ground the crossbar assembly through the back of the driver box using the Wago Connector 2 (A).
-
Mount the crossbar to the junction box using the provided 8-32 screws (B).
-
Carefully hold the fixture assembly (C) up to the crossbar.
Ground the fixture using the Wago Connector 3 (D). Make the wire connections between the driver wires and the fixture wires (E). -
Tuck all the wire connections inside the junction box and hook the fixture backplate (F) onto the French cleat of the crossbar (I).
-
Once the fixture assembly is resting in place, use the provided Hex Key (G) to tighten the bottom set screw to the crossbar until the backplate is secured.
CONTENTS
240V screw kit
SAFETY INFORMATION
Suitable for dry, indoor use only.
Maximum ambient temperature: 25˚C
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
INSTALLATION
Note: Please contact a licensed electrician.
- Ground the crossbar assembly throught the back of the driver box using the wago connector (A).
- Mount the crossbar to the junction box using the provided 8-32 screws (B).
- Carefully hold the fixture assembly (C) up to the crossbar . Ground the fixture using the wago connector (D). Make the wire connections between the driver wires and the fixture wires (E).
- Tuck all the wire connections inside the junction box and hook the fixture backplate (F) onto the french cleat of the crossbar (I).
- Once the fixture assembly is resting in place, use the provided Hex Key (G) to tight the bottom set screw to the crossbar until the backplate is secured.
T +1 718 387 6132
www.rollandhill.com