Roll Hill Odds and Ends Teardrop Wall Lights Instruction Manual
- May 15, 2024
- Roll Hill
Table of Contents
Roll Hill Odds and Ends Teardrop Wall Lights
Product Information
Specifications
- Product Name: Teardrop
- Contact: T +1 718 387 6132
- Website: www.rollandhill.com
- Includes: Custom Crossbar, 6-32 Socket Cap Screws (4), 8-32 Screws (2), Allen Key, Wago Connector (2)
Product Usage Instructions
Wall Installation Steps:
- Identify parts A-F as shown in the diagram.
- Use the Allen Key to assemble the custom crossbar and connect it securely to the wall.
- Attach the Teardrop securely to the custom crossbar using the provided screws.
- Ensure all connections are tight and secure before use.
FAQ
- Q: How do I ensure proper installation of the Teardrop?
- A: Follow the wall installation steps provided in the manual carefully to ensure a secure installation.
- Q: What should I do if I encounter any issues during installation?
- A: Contact our customer support at T +1 718 387 6132 or visit our website for assistance.
CONTENTS
Teardrop
Parts and tools
SAFETY INFORMATION
Only suitable for direct mounting on non-combustible surfaces. Under no circumstances can Odds & Ends Fixtures be mounted on normally flammable surfaces. Suitable for dry, indoor use only. Maximum ambient temperatures: 25˚ C
WALL INSTALLATION
TEARDROP
NOTE: Please contact a licensed electrician.
- Detach the custom crossbar (B) from the back of the fixture (A) and secure onto the junction box using provided 8-32 screws. Make sure to pull lead wires out through the center hole.
- Carefully hold the fixture to the custom crossbar and make lead wire connections (C), then connect the ground wire (D) to the crossbar. (Optional: connect the 0-10V dimming wires (E) as needed. 0-10V wires may be inside the fixture). Push wire connectors back through center hole of the crossbar into the junction box.
- Fit the light fixture back over the crossbar and secure it in place with the four provided socket cap screws (F).
References
Read User Manual Online (PDF format)
Loading......