SaberTec Firmware Update Configurator Instructions
- June 1, 2024
- SABERTEC
Table of Contents
SaberTec Firmware Update Configurator
Downloading the new firmware update
To install the new firmware update, make sure to perform the following steps:
-
Remove the SD card from your board and insert it into your computer.
-
Download the update.dat file and put it on the SD card:
https://sabertec.net/wp-content/uploads/2024/04/APP_24_04-23_54.zip -
The firmware update will be automatically installed after rebooting the board.
Elimination of clicking noise
The new firmware update makes the board more robust against SD cards with less
performance.
Previously, when using a slow SD card, it could happen that there is a slight
clicking noise when the hum loops. This is now fixed, effectively eliminating
the clicking noise. As another effect of the increased robustness against SD
cards with less performance, also any other sound transition has been further
smoothened.
Fix ignition speed and retraction speed
Previously, it could happen that the change of the ignition speed and retraction speed of sound fonts different from the currently active one was not saved. This is fixed now.
Fix randomized boot sounds
With the previous firmware update, it could happen that the boot sound was not chosen randomly under certain circumstances. This is fixed by the new firmware update.
Minor bug fixes
The new firmware update fixes a series of minor bugs, enhancing the reliability and stability. These refinements, though subtle, contribute significantly to a smooth and consistent operation, ensuring an overall improved user experience.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>