genie IO-16-8IP Door Controller User Manual
- June 13, 2024
- GENIE
Table of Contents
16 Input and 8 Output TCP/IP
Module with 6A DC12V PSU
**IO-16-8IP
User Manual**
Please read these instructions carefully before operating the unit and keep for further reference.
Chapter 1 Overview
The IO-16-8IP is an advanced fully intelligent Ethernet enabled controller based on a 32 bit microprocessor. It is compatible with Sphinx Series access controllers.
1.1. Features
- 32 bit TI ARM® Cortex M3 processor with 4MBit data memory
- Power Over Ethernet
- On board 100MBit real TCP/IP
- Event Flow Control
- Includes UDP Protocol
- CE, FCC, RoHS approval
1.2. Specifications
- CPU: 32 Bit Processor
- 8 Output Relays (NC/NO)
- 16 Inputs (NO)
- RS-232/RS-485/TCPIP interface
- POE: 802.1af
- TCP Communication speed: 100M
- 15 Time Groups for each relay
- Transaction Storage: 25,000 events
- Operating Voltage: 12V DC (±10%)
- 110/220 AC (50/60HZ) switched mode 12V DC 6A Power Supply c/w 13.8V DC battery charging circuit
- Operating Current: ≤200mA
- Standby Current:≤150mA
- Working Temperature: -40C~70C
- Data Memory: 4M bit (protected)
- 1 Lithium battery backup (up to 10 years data retention)
- Metal case dimensions：403mm x 384mm x 72mm
- Weight：0.2Kg (without metal case)
- 4.7Kg (with metal case & PSU
Chapter 2 Hardware
2.1. Panel description
2.2. DIP switch
S2：
| Status / DIP | ON | OFF |
|---|---|---|
| DIP 1 | Configurable | Protect |
| DIP 2 | ForcedlP: 10. 1. 1. 10 | Normal |
| DIP 3 | Reserved | Reserved |
| DIP 4 | Online, TCP | Standalone , RS485 |
Chapter 3 Wiring
3.1. Power supply
Power:
| No. | Controller socket | Identification | Color | Remark |
|---|---|---|---|---|
| 1 | Power In | PE | Protection | Yellow |
| 2 | GND | Ground | Black | |
| 3 | DC 12V | 12VDC | Red |
3.2. POE Power Supply
The POE provides power and data from a single point, using Power over Ethernet
over a single Cat-5 cable. The nine fast Ethernet ports can be used for any
10\100 Mbps link and four of these ports can supply in dusty-standard
IEEE802.3af power. Advances auto-sensing algorithm gives power only to
IEEE802.3af end devices, so no need to worry about damaging proprietary POE or
non-POE equipment.
Notes：
- 220VAC power and POE power supply, two choose one, do not use at the same time.
- When using POE power supply, total current≤1000mA, output current≤600Ma
- please check the working current carefully to avoid the shortage of power supply when connecting the reader.
- When using a magnetic lock, please do not take electricity from the controller in case the power supply is insufficient.
- When using POE power supply, you can connect the battery to the controller.
3.3. SMPS1260 Power Supply
The SMPS1260 is a heavy duty Switch Mode Power Supply with a 110-123V input. It has 2 outputs, a 12V DC 6 Amp primary output and a secondary 12V DC battery charging output.
Chapter4 Operation
In 【door configuration】door configuration ,we can set rules 【by inputs】
In 【output action 】， there are two action mode.
- Keep opened/closed: keep opened/closed until next link condtion, it can set keeping times
- Back to normal: following the condtion. when input is over ,the output is down.
Sales +44(0)1707 330541
Enquiries sales@genieproducts.co.uk
Website www.genieproducts.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>