YOLK 3MR3W LED Ceiling Light Instruction Manual

YOLK 3MR3W LED Ceiling Light

General Specification

• Light fixtures type : LED semi flush ceiling light
• Material: ABS
• Light beam angle: 120 degrees
• Input Voltage: AC 85-265V(wide supply voltage range)

Package Contains

• 1x LED Ceiling Light
• 2 x Screws
• 2 x wire Cap

Tools You need

• 1 x screwdriver
• 2 x AAA batteries (not included)

INSTALLATION

WARNING : PLEASE MAKE SURE ALL POWER CUT DOWN BEFORE INSTALLATION

STEP 1 :
Rotate left (counter-clockwise) to detach the lamp holder

STEP 2：
Wiring : black (L) toblack,white(N) to white,and put cap on.

STEP 3：
fix the lamp holder to junction box by 2*screws.

STEP 4：
Rotate right (counter-clockwise)to the end to fix the lamp.

BUTTON DESCRIPTION

PAIRING INSTRUCTIONS

Step 1 : Turn On the remote
Put two AAA batteries (not included) into the remote.
Step 2 : Pair remote with ceiling light
Turn the light fixture on from your house wall switch. Within 5 seconds of turning on the wall switch, press and hold the On/Off switch (botton 1) for 1 to 2 seconds. The light fixture will blink.Pairing finished.

BUTTON INSTRUCTIONS

Button 1

1. ON/OF Master Switch (light/RGB);
2. Code matching:Press and hold the button 1 for 2 seconds,within 5 seconds after
   powered on.The button flashes quickly for 1 time means the code is successfully matched;

Button 2

1. light ON/OFF Switch：Click to turn on and off the main light, long press to open the
   night light

2. Code clearing:
   Press and hold the button 1 for 2 seconds,within 5 seconds after powered on.The button
   flashes quickly for 3 times means the code is successfully cleared;

Button 3

1. Brighten up，max to 100%
2. Adjust RGB speed：With only RGB mode on，Switch speed will be Accelerated

Button 4

1. Dimm lights,Min to 5%
2. Adjust RGB speed：With only RGB mode on，Switch speed will be decelerated

Button 5

1. Color temperature conversion
2. Cold White 6000K→Warm White 3000K→Cold White+Warm White 4000K→Cycle;

Button 6

1. Color temperature up
2. From warm color temperature to cold color temperature (Color temperature
   adjustment range 3000K~6000K);

Button 7

1. Color temperature down
2. From cold color temperature to warm color temperature (Color temperature adjustment range is 6000K~3000K);

Button 8

1. Change to the next RGB mode;

Button 9

1. Back to last RGB mode;

Button 10

1. Turn ON/OFF the RGB color mode
2. click to turn on and off. RGB Ambient lights can work alone, or work together with the main lighting source, and operate separately with their own switches;

Button 11

1. Switch to red / green / blue separately.

Button 12

1. The RGB Ambient light pause/continue
2. Long press for colorful gradient

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>