IKEA 404.058.43 ANSLUTA LED Driver with Cord Instruction Manual
- June 9, 2024
- Ikea
Table of Contents
ANSLUTA
LED Driver with Cord
Instruction Manual
Good to know
- Device may get warm during use this is completely normal .
- Operating temperature: 5°C to 35°C.
- Unplug the product from the power source before cleaning .
- To clean the product, wipe with a dry cloth.
- Never submerge the product in water.
WARNING:
- Use only indoors in dry areas.
- Children should be supervised to ensure they do not play with the product.
- If the cord is damaged the appliance shall be destroyed.
- Do not cover when in use.
- Do not overload the product.
Save these instructions for future use.
Technical data
Type: ICPSW24-19-1
Input: 100-240 VAC, 50/60 Hz, 0.4A
Output: 24.0 V DC, 0.8 A, Max 19.0 W
DImension, mm: 72x50x25 mm
Weight: 85 gr
Type of light source(s): LED
Efficiency in full-load: 85 %
No-load power consumption (Pno): 0.1 W
Networked standby power
consumption (Pnet): N/A
Standby power consumption (Psb): N/A
Suitable as dimmer for light sources: N/A
Indoor use only
Manufacturer: IKEA of Sweden AB
(commercial registration number: 556074-7551)
Address: Box 702, SE-343 81 Älmhult, SWEDEN
The crossed-out wheeled bin symbol indicates that the item should be disposed
of separately from household waste. The item should be handed in for recycling
in accordance with local environmental regulations for waste disposal. By
separating a marked item from household waste, you will help reduce the volume
of waste sent to incinerators or land-fill and minimize any potential negative
impact on human health and the environment. For more information, please
contact your IKEA store.
Design and Quality
IKEA of Sweden
© Inter IKEA Systems B.V. 2021
AA-2161731-4
Documents / Resources
| IKEA
404.058.43 ANSLUTA LED Driver with
Cord
[pdf] Instruction Manual
404.058.43 ANSLUTA LED Driver with Cord, 404.058.43, ANSLUTA LED Driver with
Cord, LED Driver, Driver
---|---