XMOBILE X63 Pro Smartphone User Manual

XMOBILE X63 Pro Smartphone

Product Information

Your wireless phone is a radio transmitter and receiver designed and manufactured to comply with the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. The FCC guidelines are based on standards developed by independent scientific organizations through thorough evaluation of scientific studies. These standards include a safety margin to ensure the safety of all individuals, regardless of age and health.

The Specific Absorption Rate (SAR) is used to measure the amount of RF energy absorbed by the body when using a wireless mobile phone. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted at the highest certified power level in all tested frequency bands. However, the actual SAR level during phone operation can be lower than the maximum value because the phone is designed to operate at multiple power levels based on network requirements. Before a phone model is sold to the public, it undergoes testing and certification to ensure it does not exceed the established SAR limit for safe exposure.

SAR measurements are performed in positions and locations required by the FCC for each model. The highest SAR value for this model when tested for use at the ear is 0.422W/Kg, and when worn on the body, as described in the user guide, is 0.458W/Kg. The maximum scaled SAR in hotspot mode is also 0.458W/Kg. While SAR levels may vary between phone models and positions, all phones meet the government’s requirement for safe exposure. The FCC has granted Equipment Authorization for this model phone with SAR levels reported as compliant. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website.

Product Usage Instructions

When using the device in body-worn operations, it is important to comply with RF exposure requirements for safety. Maintain a minimum separation distance of 10mm between the user’s body and the handset, including the antenna. Do not use third-party belt-clips, holsters, or similar accessories that contain metallic components, as they may not comply with RF exposure requirements. Only use the supplied or an approved antenna.

General Information

Profile
Please read this pamphlet carefully in order to make your phone in perfect condition.
Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone. Due to different software and network operators, display on your phone may be different, refer to your phone for details.

Safety warning and Attentions Safety warning

• ROAD SAFETY COMES FIRST
  Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal!

• SWITCH OFF IN AIRCRAFT
  Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight.

• SWITCH OFF BEFORE ENTERING RISKY AREAS
  Strictly observe the relevant laws, codes, and regulations on the use of mobile phones in risky areas. Tum off your mobile phone before entering a place susceptible to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting process is under way.

• OBSERVE ALL SPECIAL REGULATIONS
  Follow any special regulations in force in any area such as hospitals and always switch off your phone whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your mobile phone near medical apparatuses, such as pacemakers, hearing aids and some other electronic medical devices, as it may cause interference to such apparatuses.

• INTERFERENCE
  The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone. Do not touch the antenna area during a conversation, lest that the conversation quality deteriorates.

• QUALIFIED SERVICE
  Only qualified personnel may install or repair phone equipment. Installing or repairing the mobile phone on your own may bring great danger and violates the warranty rules.

• ACCESSORIES AND BATTERIES
  Use only approved accessories and batteries.

• USE SENSIBLY
  Use only in a nom1al and proper manner.

• EMERGENCY CALLS
  Ensure the phone is switched on and in service, enter the emergency number, e.g. 112, then press the Dial key. Give your location and state your situation briefly. Do not end the call until told to do so.
  Note: Just like all other mobile phones, this mobile phone does not necessarily support all the features described in this manual due to network or radio transmission problems. Some networks even do not support the emergency call seNice. Therefore, do not rely solely on the mobile phone for critical communications such as first aid. Please consult the local network operator.

Precautions
This mobile phone is well designed with fine art. Please exercise special care when using it. The following suggestions will help your mobile phone survive the warranty period and extend its service life:

• Keep the mobile phone and all its fittings beyond children’s reach.
• Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits.
• Do not use or store the mobile phone in dusty places; lest that active parts of the mobile phone be damaged.
• Do not store the mobile phone in a high-temperature place. High temperature will shorten the life of electronic circuits and damage the battery and some plastic parts.
• Do not store the mobile phone in a chilly place. Otherwise, moistures ‘MIi be formed inside the mobile phone to damage electronic circuits VI/hen the mobile phone is moved to a constant temperature place.
• Do not throw, knock or shock the mobile phone, as that ‘MIi destroy the internal circuits and high-precision components of the mobile phone.

Your phone

Phone overview

Functions of Keys
The mobile phone provides the following keys:

• Powerkey
  Power key situates at the right side of the phone. While using the phone, you can press this key to lock screen; if you press and hold this key, a phone- options dialog would pop out. Here, you can select to adjust the profile mode, power off, reboot or turn on/off airplane mode.

• Volumekey
  Volume key situates at the right side of the phone. You can press it to adjust ringer volume.

Functions of icons

• Recent icon
  Touch this icon to access options of a selected function;

• Homeicon
  Touch it to open home screen. If you’re viewing the left or right extended Home screen, touch it can enter the home screen.

• Back icon
  Touch this icon to return to the previous screen;

Getting started

Installing the SIM Card and the Battery

A SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data.
Note: After powering off your mobile phone, wait for a few seconds before removing or inserting a SIM card. Exercise caution when operating a SIM card, as friction or bending will damage the SIM card. Properly keep the mobile phone and its fittings such as the SIM cards beyond children’s reach.

Installation

• Hold the power key for a while and select power off to power off the mobile phone.
• Take the back cover away.
• Insert the SIM Card into the SIM Card slot lightly with the corner cutting of the card aligning to the notch of the slot, the gold plate of the small card facing download and the gold plate of the normal card facing up, till the SIM Card cannot be further pushed in.
• With the metallic contacts of the battery facing the metallic contacts in the battery slot, install the battery.

Note: The SD card is a miniature object. Keep it out of the reach of children for fear that children swallow it!

Charging the Battery

• Your mobile phone can monitor and display the battery state.
• Normally the remaining energy of the battery is indicated by the battery level icon at the upper right corner of the display screen.
• When the battery energy is insufficient, the mobile phone prompts “Battery low”.
• Using a travel adapter:
• Install the battery into the mobile phone before charging the battery.
• Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted.
• Insert the plug of the travel charger to an appropriate power outlet.
• During the charging, the battery level grids in the battery icon keep flickering till the battery is fully charged.
• The battery icon does no longer flicker when the charging process ends.

Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are inserted in the right direction. Inserting them in a wrong direction may cause charging failure or other problems. Before the charging, ensure that the standard voltage and frequency of the local mains supply match the rated voltage and power of the travel charger.

Optimizing battery life
You can extend your battery’s life between charges by turning off features that you don’t need. You can also monitor how applications and system resources consume battery power. To guarantee the optimal performance of your battery, please stick to the following rules:

• Turn off radios that you aren’t using. If you aren’t using Wi-Fi®, Bluetooth®, or GPRS, use the Setting application to tum them off.
• Turn down screen brightness and set a shorter screen timeout.
• If you don’t need them, turn off automatic syncing for Gmail, Calendar, Contacts, and other applications.

Note: On the Home screen, press Menu icon and touch Settings > More>Battery. The Battery Use screen lists the applications that have been using the battery, from greatest to least battery use. The top of the screen displays the time since you were last connected to a charger or, if you’re currently connected to one, how long you were running on battery power before you connected to a charger. Then each application or service that used battery power during that time is displayed, in order of the amount of power they used. Touch an application in the Battery Use screen to learn details about its power consumption. Different applications offer different kinds of information.

Linking to the Networks and devices
Your phone can connect to a variety of networks and devices, induding mobile networks for voice and data transmission, Wi-Frel data networks, and Bluetooth® wireless connection devices, such as headsets. You can also connect your phone to a computer, to transfer files from your phone’s SD card and share your phone’s mobile data connection via USB.

• Connecting to mobile networks
  When you assemble your phone with a SIM card, your phone is configured to use your provider’s mobile networks for voice calls and for transmitting data.

• Connecting to Wi-Fi® networks
  Wi-Fi® is a wireless networking technology that can provide Internet access at distances of up to 100 meters, depending on the Wi-Fi® router and your surroundings. Touch Settings>Network > Wi-Fi®. Check Wi-Fi® to tum it on. The phone scans for available Wi-Fi® networks and displays the names of those it finds. Secured networks are indicated with a Lock icon.
  Note: If the phone finds a network that you connected to previously, it connects to it.
  Touch a network to connect to it. If the network is open, you are prompted to confirm that you want to connect to that network by touching Connect. If the network is secured, you’re prompted to enter a password or other credentials.

• Connecting to Bluetooth® devices
  Bluetooth® is a short-range wireless communications technology that devices can use to exchange information over a distance of about 8 meters. The most common Bluetooth® devices are headphones for making calls or listening to music, hands-free kits for cars, and other portable devices, including laptops and cell phones. Touch Settings> Network > Bluetooth®. Check Bluetooth® to turn it on. You must pair your phone with a device before you can connect to it. Once you pair your phone with a device, they stay paired unless you unpaired them. Your phone scans for and displays the IDs of all available Bluetooth® devices in range. If the device you want to pair with isn’t in the list, make it discoverable.

• Connecting to a computer via USB
  You can connect your phone to a computer with a USB cable, to transfer music, pictures, and other files between your phone’s SD card and the computer.

Using the touch screen

• Touch-screen tips

  • Touch
    To act on items on the screen, such as application and settings icons, to type letters and symbols using the onscreen keyboard, or to press onscreen buttons, you simply touch them with your finger.

  • Touch & hold
    Touch & hold an item on the screen by touching it and not lifting your finger until an action occurs. For example, to open a menu for customizing the Home screen, you touch an empty area on the Home screen until the menu opens.

  • Drag
    Touch & hold an item for a moment and then, without lifting your finger, move your finger on the screen until you reach the target position.

  • Swipe or slide
    To swipe or slide, you quickly move your finger across the surface of the screen, without pausing when you first touch it (so you don’t drag an item instead). For example, you slide the screen up or down to scroll a list.

• Lock screen
  When Screen lock in Security setting is enabled, press Power key to lock the handset. This helps to prevent accidental touching of keys and as well as power saving. When Sleep function in Display setting is enabled, after the handset device has been idle for preset period, the screen will be locked automatically to save power.

• Unlock screen
  Press Power key to switch on the handset device. The lock screen appears. Touch and slide right to unlock screen, and the screen being locked last time will show.

Using the onscreen keypad
You enter text using the onscreen keyboard. Some applications open the keyboard automatically. In others, you touch a text field where you want to enter text to open the keyboard. You can also enter text by speaking instead of by typing.

• To enter text
  Touch a text field, and the onscreen keyboard opens. Some applications open the keyboard automatically. In others, you touch a text field where you want to enter text to open the keyboard.

• Touch the keys on the keyboard to type.
  The characters you’ve entered appear in the text field, with suggestions for the word you are typing below.

• Use the Delete icon to erase characters to the left of the cursor.

After finishing typing, touch Back icon to close the keyboard.

Dialing Calls

• Dialing a call to a number in the contacts
  Touch the Phone icon or the phone application icon on the Home screen, then select the Contacts tab. Swipe or slide upward/downward to pick out the target contact. Then you can touch the dial icon to originate a call.

• Dialing a call to a number in call log
  Touch the Phone icon or the phone application icon on the Home screen, then select the call log tab. Swipe or slide upward/downward to pick out and touch the target contact. Then you can originate a call.

• Answering incoming calls

  • Touch the Answer icon to answer an incoming call.
  • Touch the End icon to end the current conversation.
  • To reject an incoming call, touch the Decline icon.

• Managing multiple calls
  If you accept a new call when you’re already on a call, you can touch the Answer icon to answer the current calls.

Using the Menus

Chrome Browser
You can use Browser to view web pages and search for information on the web. When you open Browser, your home page opens. The web address (URL) of the current page is displayed at the top of the window.

• Call History
  You can use this function to manage your calls:

  • All: All calls will be in the list.
  • Missed: You can view a list of missed calls. If there are some missed calls, you can drag the Column notice down to view it.
  • Outgoing: You can view and manage the dialed calls.
  • Incoming: You can view and manage the received calls.

Camera
Touch the Camera icon in the main menu interface or on the home screen, camera opens in Landscape mode, ready to take a picture. In this mode, you can touch the camera icon to take a photo, touch photo icon and slide right to switch between photo and video.

Contacts
In the contacts screen, touch menu icon and you can perfonn the following operations:

• Contacts to display: you can select the contacts on different group to display.
• Import: you can import-the contacts fonn SIM card or storage; you can also share the visible contacts.
• Blocked numbers: select this option to enter the call firewall.
• Accounts: you can sync with your account.
• Settings: you can set the display options in this interface.
• Send contacts by Messaging: select this function, then you can choose some contacts to share by messaging.
• Batch delete: Select this function, then you can mark the target contacts. To delete all contacts, you just need to touch all at the top of contacts screen. Last, touch OK and confirm to delete contacts.
• Advanced options: you can view the SIM capacity and Clear up contacts.

Gmail
You use the Gmail application to read and send Gmail. There are many Gmail address to choose Touch Gmail icon to access it. If the Gmail account has not been set up, you can set up an Gmail account in a few steps.

• Account setup
  Enter an Gmail address and the account’s password.

• Account settings

  • Set inbox checking frequency.
  • Set Send Gmail from this account by default.
  • Set Notify me when Gmail arrives.
  • Set Synchronize contacts, calendar or Gmail from this account.
  • Set automatically download attachments when connected to Wi-Fi®.

• Compose and sending Gmail
  To compose and send an Gmail:

1. Touch the create icon to compose a new Gmail.
2. Enter Gmail address (es) for intended recipient(s).
3. Touch Menu = Attach file to attach a file.
4. Touch Menu = Add Cc/Bee to add copy or blind copy this Gmail to other contacts.
5. After completing the Gmail, Touch send icon to send the Gmail. Touch folder icon to check the account status. For each Gmail account there are five default folders, i.e., lnbox, Drafts, Outbox, Send and Trash folders. To view sent Gmails, open Sent folder and tap refresh icon.

FM Radio
Please plug in the compatible earphone to the device and then turn on the radio. The earphone cable can be used as FM Antenna. Please adjust appropriate volume when listening to the radio. Continue to use higher volume is harmful for your ear.

Gallery
Both pictures and videos taken by camera or stored in SD card can be scanned through this function. You also can log in the Google to view the photos in your account.

Google Play Store
You can download and manage media files through this application. Google, Google Play and other marks are trademarks of Google LLC.

Appendix

Appendix 1: Troubleshooting
If you find exceptions when operating the mobile phone, restore the factory settings and then refer to the following table to solve the problem. If the problem persists, contact the distributor or seivice provider.

provider
The SIM card is not in position.| Check the SIM card
The metal face of the SIM card is polluted.| Clean the SIM card with a clean doth
Poor received signal quality| Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.| Move to a place where signals can be effectively transmitted
Line congestions occur when you use the mobile phone in high-traffic hours| Avoid using the mobile phone in high-traffic hours
The mobile phone cannot be powered on| The battery energy is exhausted.| Charge the battery
Calls cannot be dialed| Call barring is activated| Cancel call barring

SPECIFIC ABSORPTION RATE (SAR) CERTIFICATION INFORMATION
This device meets international guidelines for exposure to radio waves. This device has been tested and found to comply with the Specific Absorption Rate (SAR) RF exposure requirements set by international agencies.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.422W/Kg and when worn on the body, as described in this user guide, is 0.458W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.458W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on  FCC ID: 2A5WBXMOX63PR Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

References

• CTIA - Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>