Yaber V2 Projector User Manual

Yaber V2 Projector

ABER Lifetime Professional Support

Dear Customer,

Woohoo! Your projector is already in your hands! Let’s get started!

Do you have any questions on how it works? Please read this manual thoroughly before using the projector. Are you satisfied with your projector? If you have any issues, email your order number and description of your issue to: Support@yabertech.com. Send your email ASAP, as we want to fix your issues the first time you have them.

Customers sometimes can experience some confusion when using the projector. Rather than trying to communicate directly with us, many buyers instead just leave a review on the product page. However, most negative reviews are caused by non-standardized use rather than a defect in the product itself. Actually, many problems can be easily solved by setting, such as no signal, no sound etc. We promise all the projectors have been carefully checked and packaged before shipping.

Therefore, if you have any questions, please contact us and give us an opportunity to improve. We guarantee that we will provide you more satisfactory solution.

Product Packing List

• V2 Projector * 1
• Power Cord * 1
• Instruction Manual * 1
• 3-in-1 AV Cable * 1
• HDMI Cable * 1
• Lens Cleaning * 1
• Support Base*1
• Remote Control * 1 (Batteries not included)

Some video tutorials please refer to YABER’s YouTube channel: https://www.youtube.com/channel/UCcU4wy4vPRQa_uNcolDd2hA

Product Description

1. Focus Ring
2. Keystone Ring
3. Power
4. OK
5. Source
6. Left Move
7. Right Move
8. Return
9. Earphone Port
10. AV Port
11. USB-T
12. USB
13. HDMI
14. VGA
15. Power Cable Port

| Name| Description
---|---|---
01| Focus Ring| Adjust the focus ring to get the clearest image.
02| Keystone Correction| Adjust the keystone ring to get a rectangle shape.
03| Power| This button can lead the projector to working/ standby mode.
04| OK| Confirm
05| Source| Choose Source (Screen Mirror,PC-RGB,HDMI, USB, AV,etc.)
06| Left Move| Left Move
07| Right Move| Right Move
08| Return| Back
09| Earphone Port| Earphone port
10| AV Port| Audio input
11| USB-T| Wired screen mirroring port (With Original USB cable)
12| USB| USB port
13| HDMI| HDMI input
14| VGA| VGA input
15| Power Cable Port| Plug the power cable

Pictures shown are for illustration purpose only.Actual product may vary due to product enhancement.

Projector Specification

Suported)
Port| AV, USB, USB-T, HDMI, VGA

Remote control

Replace the remote control battery

1. Push to open the battery cover.
2. Remove both old batteries and install new ones (AA). Make sure that the polarity of the batteries (+/-) is correctly aligned.

Thanks

Thank you very much for purchasing the YABER V2 projector.
Please read this instruction manual carefully before use. Also, please keep it handy so you can check it at any time.
If in doubt, do not hesitate to contact Support@yabertech.com.
We can provide after-sales service until satisfaction.

Please Attention:

The Mirror display function doesn’t support protected videos due to copyright protection. (Netflix, Amazon Prime Video and Hulu etc.)

Important safeguards

These safety instructions are to ensure the long life of the projector and to prevent fires and shocks. Read them carefully and pay attention to all warnings.

Installation

1. For best results, use the projector in a dark room.
2. Place the projector on a flat, level surface in a dry area away from dust and moisture.
3. Exposure to direct sunlight, smoke or steam may damage internal components.
4. Handle the projector carefully. Falling or shaking can damage internal components.
5. Do not place heavy objects on top of the projector.

Adjust the Tilt Base and Hang Ceiling

Adjust the tilt base:
Install the screws (included in the package) to place ①, lift the front edge of the projector to the desired height, turn the presser foot and release the button to lock the tilt base to the appropriate position.

Hang ceiling:

Please purchase the projector stand and M5 screw additionally. Install the projector stand to place ①, and hang the projector on the ceiling. ( Note: You can install the Tripod Stand to the place ① )

Supply

1. The projector is designed to operate with a 110-240 V ~ 50/60 Hz AC adapter. Ensure that the power supply meets this requirement before attempting to use the projector.
2. Handle the power cord carefully and avoid bending it too much. A damaged cord can cause electric shock or fire.
3. If the projector will not be used for a long time, unplug the power cord from the outlet.

Cleaning

1. Unplug the projector before cleaning it.
2. Periodically clean the cabinet with a damp cloth. If it is very dirty, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinners.
3. Use a blower or lens paper to clean the lens and be careful not to scratch or damage the lens.

FAQ

1. At the time of switching on, the indicative light does not work
   ①. The power supply may not be well connected
   ②. Check the overheating protection system

2. Pressing the power button on the remote control does not turn on the projector
   ①. The remote control batteries are empty
   ②. The signal between the remote control and the IR sensor is obstructed
   ③. Strong direct light on the IR sensor?

3. No image on the screen
   ①. Is the channel setting correct?
   ②. Is there an input signal?
   ③. Is the input cable inserted correctly or is it in the wrong position?
   ④. In PC mode the refresh rate is> 75KHz?

4. The image works but there is no sound
   ①. Are the input cables connected correctly?
   ②. Volume at minimum or silent
   ③. Check that the audio format of the video is in the supported list

5. Turns off automatically after being turned on for a while
   ①. Is there a barrier around the fan?
   ②. Small or large voltage fluctuations
   ③. Check the overheating protection system

6. I can not find devices connected with hard drives or flash drives
   ①. Re-insert the device
   ②. Check if the device is working

7. Unable to play video
   ①. Is the video format correct?
   ②. The file is corrupted?
   ③. The device is damaged

STARTING PROJECTOR

Turn on the projector

1. Install two AAA batteries in the remote control before using.
2. Press the Power key on the remote or panel, the indicator light will turn red.
3. Remove the lens cover of the projector, the lamp will start working 2 seconds later, when an image is projected on the screen the machine is working smoothly. If the first projection screen is not the start up screen, press the “S” button on the remote and select USB source.
4. Adjust the keystone ring to get a rectangle shape.
5. Adjust the focus ring or rotate the lens of the projector to get the best image performance. (If it is still blurry, please try to adjust the projection distance.)
6. If you connect other devices, be sure to select the corresponding source. If you do not select the correct source, the projector will not be able to detect the signal.
7. Press the Menu button on the remote control to enter the OSD Language to set your preferred language;

Turn off the projector

1. Press the Power button when the projector is in use, this will cause it to switch to standby mode.
2. When the projector switch into standby mode, the light will blink red.

Keystone and Focus

If the projected image is in a trapezoidal shape, it can be resolved by Keystone correction. ( Do Manual Keystone Correction )

Note: If the Keystone correction fail to resolve image shape, please reduce the vertical height of the projector in relation to the center of the screen.

The projected image may be blurry or difficult to see, this is due to lack of Focus adjustment with the lens, please follow the processes below to adjust the Focus. ( Do Manual Focus, find the most sharpness picture on the screen )

Note: It is normal when sharpness in the central, blur in the edge.

Setting the Main Menu

The projector’s normal startup screen is as follows. If the first projection screen is not this one, press the “ ****” button on the remote control to select USB source.

Select the Input Source

When the “No Signal” prompt appears, you need to select the input source:

1. Press the “ ” button on the remote control to select the desired signal, then press the OK button on the remote control.
2. Once the signal is detected, the selected source information will be displayed on the screen after a few seconds.
   

Menu Setting Method

1. Press the “ ” on the remote, then the menu picture will display on screen.
   Or you need to select the “ ” key on the projector to enter the 4 menus without the remote control

2. Press“◀/▶”key, the menu will move to “PICTURE”>“SOUND” >“TIME”>“OPTION”.

3. Select the adjust interface,use“▲/▼” key to choose the wanted item.

4. Press“OK” or “◀/▶”to adjust the item parameter.

Screen Mirroring Methods

Warming Tips:

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to contact YABER via Support@yabertech.com
   
   At first, turn on the the projector, press the “source” bottom on the remote, then it will shows ” Input Source” option on the projection image. Choose the “Screen Mirroring”, then press “OK” you will get this menu:

Wireless Projection Method

For iOS Users

Method 1: Home Network Connection Mode

Step 1

Press the OK button to enter the WIFI list – Select your home WIFI from the list – Connect the V2 projector to your home WIFI

Step 2

Select the [Settings] menu on your IOS device – Turn on the [WIFI] function – Connect your IOS device to the same home network as the projector.

Step 3

Open Control Center- Tap the Screen Mirroring button-Connect [RKcast-xxxxxx] ① Open control center.
② Tap on Screen Mirroring-Select the Device name [RKcast-xxxxxx]

Method 2: Cellular Network Connection Mode(From your mobile phone card)

Step 1

On your iOS device, tap [Settings] -[Wi-Fi] -Turn [Wi-Fi] ON. Available networks are shown.
Choose the WiFi name like [RKcast-xxxxxx], Connect it and enter the password [12345678] which is on the Projector’s menu.

Note: After connecting, if “No Internet Connection” is displayed, please ignore it because it will not affect the use.

Step 2

Open Control Center- Tap the Screen Mirroring button-Connect [RKcast-xxxxxx] ① Open control center.
② Tap on Screen Mirroring-Select the Device name [RKcast-xxxxxx]

For Android Users

Method 1: Home Network Connection Mode

Step 1

On your Android device, tap [Settings] -[WLAN Display] -Turn [Wi-Fi] ON. Available networks are shown.

Note: different brands of Android phones have different operations for select WLAN Display, please refer to your phone’s manual.

Step2

Choose your home WiFi name (Ex. YABER), Connect it and enter your password [XXXXXXXX].

Step 3

Tap [Settings] -[Device connectivity] -Turn [Wireless projection] ON

Method 2: Cellular Network Connection Mode(From your mobile phone card)

Step 1

On your Android device, tap [Settings] -[WLAN Display] -Turn [Wi-Fi] ON. Available networks are shown.

Note: different brands of Android phones have different operations for select WLAN Display, please refer to the phone’s manual.

Step2

Choose the WiFi name like [RKcast-xxxxxx], Connect it and enter the password [12345678] which is on the Projector’s menu.

Step 3

Tap [Settings] -[Device connectivity] -Turn [Wireless projection] ON-Select the projector name like [RKcast-xxxxxx]

Wired Screen mirroring (With Original USB cable)

For IOS

1. Turn on the projector — Press the “S” button on the remote — “Input Source” — Select “Screen Mirroring” — Press the “OK” button.
   

2. Plug the original cable of your IOS equipment to the USB-T Port.

3. Show with “Do you trust this equipment?”, tap “Trust”.

For Android

1. Turn on the projector — Press the “S” button on the remote — “Input Source” — Select “Screen Mirroring” — Press the “OK” button.
2. Plug the original cable of your Android equipment to the USB-T Port.
3. On the “Do you allow debugging via USB?” Prompt, tap “OK”.
4. After a while, Android screen will be displayed on the projector.

Warming Tips:

1. The USB cable MUST be the ORIGINAL cable or the cable which can transfer the data, otherwise screen mirroring may fail. You can plug the cable into your laptop to check the availability of transferring the data.
2. Some mobile devices may not support screen mirroring due to the compatibility.
3. Some Android mobile devices may only transfer the display without audio due too the protocol restrictions.

PROJECTOR CONNECTIONS

Connecting to the Computer

Using the HDMI or VGA cable to connect with projector.
(An HDMI connection is recommended for projecting movies, videos, and other files which need to be HD.)

1. Turn on your computer and the projector;

2. Connect the HDMI/VGA cable to your computer’s HDMI/VGA port;

3. Connect the other end to any available HDMI/VGA port on your projector;

4. Press the “Source” button to enter the interface of Input Source;

5. Select HDMI/ PC-RGB source to project any files on your computer;

6. On your laptop, hold down the keyboard keys change your display mode:
   
   Computer only: is the default option – only displays on the main monitor.
   Duplicate: makes all of the monitors display the same thing duplicating the desktop on each monitor.
   Extend: makes all of your monitors act like one big monitor extending the desktop across all of them
   Projector only: Displays only on the secondary monitor like a projector

7. You can change your screen resolution: Choose Start→Control Panel→Appearance and Personalization → Adjust Screen Resolution
   

8. (Note: VGA connection can only transmit analog signal of video not audio. An external speaker is required when the device is connected via VGA cable.)
   

Connecting to the DVD player

1. Use the supplied AV cable to connect the DVD player to the projector.
2. Turn on the projector and DVD player.

If your player has an HDMI output, it is best to use it over the analog (AV) option. Audio output must be configured from the DVD player menu if external speakers are installed.

Connecting to the soundbar

1. Use the supplied AV cable to connect the soundbar to the projector.
2. Turn on the projector and the sound bar.
   

PROJECTOR IMAGE SETTING

Picture Menu

PICTURE MENU

| MODE|

FUNCTION

---|---|---
Picture Mode| Standard, Soft, User, Vivid| Switch among the image mode
Color Temperature| Medium, Warm, User, Cool| Switch among the color temperature mode
Aspect Ratio| Auto/ 4:3/ 16:9| Set up the aspect ratio of the image.
Projection Mode| Front/Rear on Desk, Front/ Rear on Ceiling| Set up the projection mode
ZOOM| 75%-100%| Reduce the screen size from to -25%