Longdeem LD-K3074A Electric Tea Kettle User Manual

June 13, 2024
longdeem

**Longdeem LD-K3074A Electric Tea Kettle User Manual

**

Longtime Recomb Mends Safety First

At Longtime we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions. Misuse can cause potential injuries

Important Safeguards

Read All Instructions Before Use And Save For Future Reference

Remove and safely discard any packaging material and promotional labels before using the kettle for the first time.
To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this kettle. Always ensure the kettle is properly assembled before use. Follow the instructions provided in this book.
The kettle must be used only with the power base supplied. This kettle is not intended to be operated by means of an external timer or separate remote- control system.
This kettle has been designed specifically for the purpose of boiling drinking quality water only. Under no circumstances should this product be used to boil any other liquids or foodstuffs.
Do not place the kettle near the edge of a bench or table during operation. Ensure that the surface is level, clean and free of water and other substances.
Do not operate the kettle on a sink drain board.
Do not touch hot surfaces. Use the handle for lifting and carrying the Do not place anything on top of the lid.
Do not release the lid while the water is boiling. Ensure the lid is closed whilst boiling.
Do not press the lid release button to open the lid during and after operation. This may result in boiling water splashing from the kettle. Pour out all the hot water from the kettle before opening the lid to

  • Never immerse the kettle base, power base, power cord or power plug in water, or allow moisture to come into contact with these parts. + To prevent damage to the kettle do not use chemicals, alkaline cleaning agents, steel wool or abrasive cleaners to clean the inside or outside of the kettle. Use a mild cleaning agent with a soft damp cloth.
  • Do not move the kettle while it is switched on.
  • Use caution when pouring water from the kettle, as boiling water and steam will scald. Do not pour the water too quickly.
  • To protect against electric shock, do not immerse the kettle base, power base, power cord or power plug in water or allow moisture to come in contact with these parts.
  • Do not remove the kettle from the power base during operation. Ensure the kettle has switched off after the water has boiled or reached the selected temperature, before removing the kettle from the power base. If the kettle is removed from the power base during the boiling cycle, the kettle will automatically switch off.
  •  Always fill the kettle with water between the minimum (MIN) and maximum (MAX) marks on the water window on the kettle. Too little water will result in the kettle switching ‘OFF’. Filling above the maximum mark (MAX) may result in boiling water splashing from the kettle.
  • The lid should always be locked firmly in place in the closed position before and during use. Do not open the lid during operation as this may result in boiling water splashing from the kettle. Pour all the hot water from the kettle before opening the lid to refill.
  • Do not place the kettle in direct sunlight. Color fading and discoloration may occur when the kettle is consistently exposed to

sunlight.

  • When using the kettle, avoid spillage of water on the kettle base and connector as this may cause damage to the kettle.
  • Care should be taken when handling the kettle during use, ensuring that the kettle body and parts are not touched as these may still be hot due to residual heat after boiling. Always ensure to use the kettle handle when removing the kettle or pouring water after kettle has boiled.
  • Do not use chemicals, steel wool, or abrasive cleaners to clean the outside of the kettle.
  • The filter could become damaged with time. Check regularly and replace if found to be damaged.
  • Ensure the kettle has cooled down before attempting to clean the filter and kettle.

Warning

  • Do not operate the kettle on an inclined plane. Do not operate the kettle unless the element is fully immersed. Do not move while the kettle is switched on.
  • Keep the kettle clean. Follow the cleaning instructions provided in this book.

Important Safeguards For All Electrical  Appliances

  • Fully unwind the power cord before use.
  • Connect only to a 120V power outlet.
  • The appliance must be used on a properly grounded outlet. If it is not sure, please consult a qualified electrician.
  • Do not under any circumstances, modify the power plug or use a power plug adapter.
  • Do not place this appliance on or near a heat source, such as hot plate, oven or heaters.
  • Position the appliance at a minimum distance of 7.82 inch away from walls, curtains and other heat or steam sensitive materials and provide adequate space above and on all sides for air circulation.
  • Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
  • This appliance is for household use only. Do not use this appliance for anything other than its infended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
  • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use.
  • Before cleaning, always turn the appliance to the OFF position, switch off at the power outlet, unplug at the power outlet and remove the power cord, if detachable, from the appliance and allow all parts to cool. * To protect against electric shock, do not immerse the power cord, power plug or appliance in water or any other liquid or allow moisture to come in contact with the parts, unless it is recommended in the cleaning instructions.
  • If you encounter any issues, please feel free to contact support@longdeem.com via email to find a solution.
  • We recommend regularly checking your device. To avoid danger, do not use the device if the power cord, power plug, or device is damaged in any way. Please contact support@longdeem.com via email to find a solution.

For Household Use Only Save These Instructions

  • The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. See a qualified electrician for professional advice.
  • During electrical storms, the appliance should be disconnected from the power source at the wall socket to prevent any electrical surges that may arise during the storm and which may inadvertently cause damage to the appliance and its electronic componentry.

Component

Component

  • A. Premium stainless steel housing
  • B. 1.7 litre/7 cup capacity
  • C. 30 minute Keep Warm function with power cord storage.
  • D. 5 temperature settings
  • E. Ergonomic handle with lid release button
  • F. BPA Free* water window
  • G. Multi-directional power base
  • Laboratory tests show water not containing BPA that is boiled in this kettle will be BPA free to a resolution of 1 part per million.

Functions

Variable Temperature Control
The electronic control panel offers four different temperature settings for optimal tea and coffee brewing:

WHITE GREEN OOLONG COFFEE BOIL /BLACK212°F
170°F 180°F 195°F 205°F 212°F

Note

This product is not calibrated for commercial or scientific use. Temperatures may vary +/-5 °C degrees, being within range for optimal brewing
for each type of tea or coffee.

Optimal Brewing

Tea varieties are grown and produced in many different environments and require different water temperatures to allow their unique favor and aroma to develop during brewing. To bring out the optimal quality and taste of more delicate tea leaves, a lower temperature will produce a better favored cup of tea.
For example, steeping green or oolong teas in boiling water may scald the tea leaves and result in a bitter, astringent brew. Brewing the tea for too long may also result in a bitter, unpleasant taste; while brewing for too short a period may leave the tea bland. For best results always follow the specific directions on the tea/coffee packet. To bring out the optimal taste and quality of your favorite tea or coffee, we recommend that you use your Longtime Kettle and the corresponding temperature indicated on the control panel.

Keep Warm Function

The Longtime Kettle offers a convenient KEEP WARM function that can be activated before, during or on completion of the water heating cycle. If activated, when the water has reached the selected Celsius temperature, the KEEP WARM function will hold the selected temperature for 30 minutes. If the 212°F button is selected when using the KEEP WARM function, the boiled water will remain at approximately 205° F Celsius for 30 minutes.
Keep Warm Function

To activate the KEEP WARM function, first press the desired water temperature button from the four options on the control panel, then press the KEEP WARM button, and the kettle will start heating the water. Alternatively, you can activate the KEEP WARM button at any time during and/or within 10 minutes after the heating cycle. If the kettle is removed from the power base for more than ten minutes during the KEEP WARM function, the kettle will automatically turn off.

Note

If you change the temperature setting to a higher setting during the KEEP WARM function, the area around the BOIL BLACK button will light up with a white light, and heating will start automatically. If the KEEP WARM function is not selected within 10 minutes after the end of the heating cycle, the boiling process will need to be restarted. Be sure to press the KEEP WARM button at any time before or during the heating cycle and/or within 10 minutes after the heating cycle is complete.

Before First Use

Remove and safely discard any packaging material or promotional labels attached to your kettle and unwrap the cord from the power base. It is recommended before first use to fill the kettle to the maximum level with cold tap water, bring to the boil by selecting the BOIL 212°F button, then discard the water. Your kettle will only operate when positioned on the power base. The kettle will automatically switch off when the water has reached the selected temperature.

Operation Of Your Kettle

  1. To fill the kettle, remove it from the powerbase and open the lid by pressing the lid release button. Fill with the desired amount of water, then close the lid ensuring it is locked firmly into place.
    Note
    Always fill the kettle between the minimum (500ml) and maximum (1700ml) marks on the water window. Too little water will result in the kettle switching off due to the safety boil dry protection. Filling above the maximum mark (MAX) may result in boiling water splashing from the kettle.

  2. The switch function of the electric kettle is activated by pressing the temperature (brew) function button. For example, when you need to boil water, press the BOIL BLACK button, and the button on the BOIL BLACK will light up with a white light. The kettle will start boiling water, and when the water boils, the kettle will automatically stop working and the white light will go off. If you wish to keep the water warm after boiling, press the KEEP WARM button simultaneously with the BOIL BLACK button. Both the BOIL BLACK and KEEP WARM buttons will light up with a white light. The electric kettle will keep the water warm for 30 minutes after boiling. Both the BOIL BLACK and KEEP WARM buttons will remain lit until the 30-minute warming time is up, at which point both buttons will turn off simultaneously.

  3. Remove and safely discard any packaging material or promotional labels attached to the kettle, and uncoil the cord from the power base. It is recommended to fill the kettle to the maximum water level with cold tap water and boil the water by selecting the BOIL BLACK 212°F button before the first use, and then discard the water. Your kettle can only operate when placed on the power base. The kettle will automatically shut off when the water reaches the selected temperature.
    Note
    The KEEP WARM function can be selected before, during or within one minute after the completion of the water heating cycle.

  4. Remove and safely discard any packaging material or promotional labels attached to the kettle, and uncoil the cord from the power base. It is recommended to fill the kettle to the maximum water level with cold tap water and boil the water by selecting the BOIL BLACK 212°F button before the first use, and then discard the water. Your kettle can only operate when placed on the power base. The kettle will automatically shut off when the water reaches the selected temperature.

  5. If further heating and KEEP WARM of the kettle is not required, switch off at the power outlet, unplug the power cord and empty the water from the kettle. Replace the kettle onto the power base.

  6. The kettle should be stored on its power base when not in use. The power outlet should be switched off and the power cord unplugged from the power outlet when not in use.

Warning

The appliance is designed for boiling of drinking quality water only. Never use to heat or boil any other liquids or foodstuffs. The lid should always be firmly in place and locked into the closed position before use.

Warning

Do not press the lid release button to open the lid during and immediately after operation. This may result in boiling water splashing from the kettle. Pour out all the hot water from the kettle before opening the lid to refill.

Note

  • The default temperature setting of the kettle when switched on at the power outlet is 212°F. When the kettle is switched off at the power outlet and switched back on, it will automatically default to the 212°F temperature sefting.
  • When the kettle remains switched on at the power outlet and different temperature settings have been selected, the kettle will default to the last selected temperature setting.

Note

This kettle must be used only with the power base supplied. Use caution when pouring water from your kettle, as boiling / heated water and steam will scald. Do not pour the water too quickly.

Note

Always fill the kettle to between the minimum (500ml) and maximum (1700ml) marks on the water window on the kettle. Filling above the maximum mark on the water window of the kettle may result in boiling/heated water splashing from the kettle.

Safety Boil Dry Protection

The kettle is fitted with a safety device, which protects against overheating should the kettle be operated with insufficient water. If this occurs the kettle will stop heating and all the lights around each of the buttons on the power base will continuously fiat for about one minute. Switch off at the power outlet and allow the kettle to cool before refilling. The safety device will automatically reset when the kettle has cooled down.

Descaling the Kettle

What is Hard Water?

  • Hard water is a kind of water that contains calcium or magnesium mineral ions that often in the form of carbonate
  • These ions do not pose any health threat, but they can engage in reactions that leave insoluble mineral deposits.

Notes
It’s normal if your kettle exposes spots or rust on the stainless steel bottom after the first use if the water quality in your area is so hard.

How to Descale/Clean the Kettle?

  1. Filling the kettle with 1 cup of vinegar or lemon juice and 2 cups of water.

  2. Boiling the liquid and leave it for 2 hours, then use a cloth to clean and wipe.

  3. Rinse the kettle with clean water, and dry with a soft, clean cloth. Repeat as needed.

Note

The filter could become damaged with time, so check regularly and replace if found damaged.

To Clean The Exterior

The exterior of the kettle and power base should be wiped with a damp cloth then polished with a soft, dry cloth.

Note

Do not use chemicals, steel wool, or abrasive cleaners to clean the inside or outside of the kettle or power base.

Storage

Ensure the kettle is switched off, clean and dry before storing. Ensure that the lid is closed and locked securely into place. Wrap the power cord around the power cord storage under the power base. Stand the kettle upright on the power base. Do not store anything on

Warranty

2Years Limited Warranty

With lifelong technical support and 24/7 customer service

Your purchase comes with a 100% satisfaction guarantee from Longdeem Longdeem supports free replacement for any problems or refund for any dissatisfaction under warranty. We will take care of all quality-related issues with a replacement or full refund including any return shipping costs. If your product is defective and under warranty, please contact us at Email: support@longdeem.com

More Longtime Products
If you’re happy with this kettle, the line doesn’t stop here. Check out https://Longdeem.com/ for a line of all our beautiful and thoughtfully designed appliances. They might be right at home in your kitchen, too!

Company Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals