EVERBILT IM-4-46398PHLHD 14 Inch Extension Side Mount Ball Bearing Drawer Installation Guide
- June 13, 2024
- Everbilt
Table of Contents
**EVERBILT IM-4-46398PHLHD 14 Inch Extension Side Mount Ball Bearing Drawer
**
Safety Information
WARNING: For more secure application mounting to wall stud is recommended. Ensure mounting is stable and strong enough to support intended wei ht. If mounting to surfaces other than wood, use a ro riate hardware. Hollow wall installation is not recommended.
TOOLS REQUIRED
-
Power drill
-
Stud finder
-
Tape measure
-
Phillips screwdriver
-
Pencil
-
Level
INSTALLATION HARDWARE
Uprights, hang track, shelves and hardware are sold separately
| Description | Quantity |
|---|
10 2-1/2 in. Screws
| | Beam Length
40 in.
80 in.
Screws Qty| 5
10
| Upright Length
25 in.
48 in.
78 in.
Screws Qty| 3
4
16
|
6 2-1/2 in. Srew
| 1
61-1/2 in. Screw
| 1
Installation
-
LOCATING WALL STUD
□ Mark locations on the wall studs at the desired height.
□ Use a level to ensure the holes are even horizontally.
-
LOCATING WALL STUDS
□ Secure handrail to wall studs using #10 2-1/2 in. screws. -
HANG THE UPRIGHT ON THE RAIL
□ Mark holes. Max spacing 16 in. from center to center of upright.
□ Install and fasten the upright using the #1 0 screws. -
PLACE THE BRACKET
□ Place the bracket horizontally into the upright.
□ Confirm the bracket is at the same height on each upright to ensure the shelf will be level once installed.
-
ADDING THE SHELVES
□ Check that all brackets are level and place the shelf onto them.
□ Secure the shelves to the brackets.
□ Recommend to use 14 in. shelf.
CUSTOMERS SUPPORT
HOMEDEPOT.com
Please contact 1-877-527-0313 for
further assistance.