MEAN WELL XBG-240 Series Constant Power Mode LED Driver Owner’s Manual
- June 13, 2024
- MEAN WELL
Table of Contents
MEAN WELL XBG-240 Series Constant Power Mode LED Driver
Features
- Full power output at 70~100% constant power mode operation
- Wide input range 100 – 305VAC with active PFC function
- Metal housing design with IP67
- Multiple dimming functions:3 in 1. (0-10V/PWM/Resistor)
- Surge protection with 6kV /4kV
- Dimming circuit with Isolated for latest safety regulation
- Typical lifetime>50000 hours and 5 years warranty
- AC input cable with connector for flexible Installtion
Applications
- LED bay lighting
- LED stage lighting
- LED spot lighting
- Explosion-proof lighting
- Type HL LED driver for class I division 2.
GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx
Description
XBG-240 series is a 240W AC/DC LED driver featuring the constant power mode. XBG-240 operates from 100~305VAC and offers with different rated current ranging between 4000mA and 5700mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XBG-240 series comply with the latest version of IEC61347/IEC60598-1 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both users and luminaire system during installation.
Model Encoding
SPECIFICATION
NOTE
- All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 °C of ambient temperature.
- De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
- The driver is considered as a component that will be operated in combination with final equipment. Since MC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify MC Directive on the complete installation again.
- Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
- This series meets the typical life expectancy of >50,000 hours of operation when case, particularly tc point (or TMP, per DLC), is about 75°C or less.
- To fulfill requirements of the latest Er regulation for lighting fixture, this LED drive can only be used behind a switch without permanently connected to the mains.
- Please refer to the warranty statement on MEAN WEL’s website at hitor/wmeanwell com
- The ambient temperature derating of 3.5°C/1000m with fanless models and of 5°C/1000m with fan models for operating altitude higher than 2000m(6500ft).
- Products sourced from the Americas regions may not have the PSE/CCC/BIS/KC logo. Please contact your MEAN WELL sales for more information.
- For any application note and I water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Product Liability Disclaimer: For detailed information. please refer to httos://www.meanwell.com/serviceDisclaimer.asox
BLOCK DIAGRAM
DRIVING METHODS OF LED MODULE
DIMMING OPERATION
3 in 1 dimming function (for AB-Type)
- Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
- Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
- Dimming source current from power supply: 100μA (typ.)
Note :
- Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
- The output current could drop down to 0% when dimming input is about 0Ω or 0Vdc, or 10V PWM signal with 0% duty cycle.
OUTPUT LOAD vs TEMPERATURE
NOTE: It may has a soft-start status when operation at -30℃ fullload and 100VAC input condition
STATIC CHARACTERISTIC
TOTAL HARMONIC DISTORTION (THD)
POWER FACTOR (PF) CHARACTERISTIC
LOAD
EFFICIENCY vs LOAD
XBG-240 series possess superior working efficiency that up to 93% can be reached in field applications
LIFE TIME
INSTALLATIONS
Caution
- Please inspect the appearance of the driver if the package is damaged. There should not be any cracks.
- Please do not drop or bump the driver.
- All screws including the suspension screw should be paired with a spring washer and locked tight.
- The entire luminaire, including the driver, should be limited to 15Kg or less.
- The luminaire should be cautiously protected from damage due to shock throughout packaging and transportation.
- Please thoroughly follow the preceding cautionary notes to prevent the luminaire from falling, leading to injuries
MECHANICAL SPECIFICATION
A-Type(AC Cable with fixed cable)
AB-Type(AC Cable with fixed cable)
- Max. Case Temperature.(case temperature measured point)
- Ta: Ambient Temperature measured point
A-C-Type(AC cable with connecto
AB-C-Type(AC cable with connector)
Terminal Pin No. Assignment(CHOGORI 22003515-01)
- Max. Case Temperature.(case temperature measured point)
- Ta: Ambient Temperature measured point
AC input cable option
INSTALLATION MANUAL
Please refer to: http://www.meanwell.com/manual.html
QR SCAN
File Name: XBG-240-SPEC 2022-02-18
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>