EQUATOR 1840 18 Inch Built-in Dishwasher User Manual

June 9, 2024
EQUATOR

EQUATOR 1840 18 Inch Built-in Dishwasher

EQUATOR-1840-18-Inch-Built-in-Dishwasher-product

Please read the instructions carefully and keep for future reference. Information may be updated from time to time so please refer to the manual online for the latest version of the manual.

Warranty

Equator Appliances undertakes to the consumer-owner to repair or, at our option, to replace any part of this product which proves to be defective in workmanship or material under normal personal, family or household use, in USA and Canada, for a period of one year from the date of original purchase. During this period, we will provide all labor and parts necessary to correct such defect, free of charge, if the appliance has been assembled and operated in accordance with the written instructions with the appliance.

Exclusions
In no event shall Equator Appliances be liable for incidental or consequential damages or for damages resulting from external causes such as abuse, misuse, incorrect voltage or acts of God. This warranty does not cover service calls which do not involve defective workmanship or materials covered by this warranty. Accordingly, diagnosis and repair costs for a service call which does not involve defective workmanship or materials will be the responsibility of the consumer-owner.

Specifically, the following work is not covered under warranty and does not constitute warranty work:

  • Installation – e.g. Incorrect height of drain hose
  • Maintenance – e.g. Failure to clean filters or spray arms
  • Mishandling – e.g. Breakage of racks and basket

Most work is covered. The defining factor is, has the machine malfunctioned (Equator Appliances is responsible) or has the customer omitted or done something to cause the appliance to malfunction (customer is responsible). Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

WARRANTY SERVICE

This warranty is given by:
Equator Appliances
10222 Georgi belle Drive, Suite 200
Houston, TX 77043-5249

For Customer Service:

Appliance Desk
Phone/Text: 1-800-776-3538
Email: service@ApplianceDesk.com
Web: www.ApplianceDesk.com
Business hours: 9:00 am to 5:00 pm weekdays

You can register your Warranty by either of the following methods:

  1. Scan the QR Code
  2. Open Smart Phone
  3. Open Camera
  4. Scan QR Code
  5. Click the Link
  6. Register online at ApplianceDesk.com/Warranty

GENERAL
Since it is a responsibility of the consumer-owner to establish the warranty period by verifying the original purchase date, Equator Appliances recommends that a receipt, delivery slip or some other appropriate payment record be kept for that purpose.

This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

All rights reserved. Manual subject to change without notice.

Important Safety Instructions

WARNING:
When using the dishwasher, follow basic precautions. Read all instructions before using the dishwasher! Save these operating instructions and pass them on to any future user.
Use the dishwasher only for its intended purpose as described in this user manual. This appliance is intended for normal household use only. Do not change the specification of the appliance. The manufacturer disclaims responsibility for damage or injury caused by improper use of this appliance.

Do not store or use flammable liquids or vapors near the dishwasher. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for a long period, before using the dishwasher turn on all hot-water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame.

Use only detergents recommended for use in dishwashers and keep detergents out of reach of children. “Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children and infirm persons away from the dishwasher when the door is open. Consult a doctor immediately if detergent has been swallowed or inhaled.”

  • Do not touch the heating element.
  • Do not tamper with controls.
  • Do not sit or stand on the dishwasher racks or door.
  • Ensure that the dishwasher door does not remain in an open position, to prevent accidents from happening.
  • When positioning the appliance, ensure the electrical cord is not tangled or damaged.
  • Do not place multiple portable socket-outlets at the rear of the appliance.
  • Never unplug the appliance by pulling on the power cord. Grip the plug firmly and pull straight out to remove from wall socket.
  • Do not use a damaged power cord and do not modify the plug.
  • Do not use an extension cord.
  • Children should be supervised to ensure that they do not climb on or play with the appliance. Discard packaging material and keep out of reach of children.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.

Safe Disposal
Before discarding the dishwasher, remove the door in order to prevent risk of child entrapment.

WARNING!:
Risk of injury or suffocation! Ensure that any plastic wrappings, bags, small pieces etc. are disposed of safely and kept out of the reach of children.

Please dispose of this appliance in accordance with local regulations.

Installation

See Installation Guide for detailed instructions.

Dishwasher must be installed by a qualified technician. Place the dishwasher in an area where it will not be exposed to the weather and to freezing temperatures and away from sources of heat and high humidity. Place the Dishwasher on a flat level surface. Disconnect the power supply before installing the dishwasher. Only connect the dishwasher to the power supply when all installation and plumbing work is complete. Never connect the ground wire to gas lines, hot water pipes or plumbing lines.

WARNING
This appliance must be grounded. Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Consult a qualified electrician if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Connect to a properly rated, protected, and sized power supply circuit to avoid electrical overload. The dishwasher is designed for an electrical supply of 120V, 60Hz, AC, connected to a dishwasher-dedicated, properly grounded electrical circuit with a fuse or breakers rated for 15 amperes. Electrical supply conductors must be a minimum of #16 AWG copper wire rated at 167°F (75°C) or higher.

This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. Plug the power cord into a grounded outlet in accordance with local codes. Check the plug and cable before you connect the power and make sure it is the correct 110 voltage. Dishwasher must be secured to adjacent cabinetry using the brackets provided. To ensure that the dishwasher has been correctly installed, check for water leaks during and after the first use.

Preparation and Operation

Do not operate the dishwasher unless all enclosure panels are properly in place. Generally, the dishwasher is designed for cups and glasses on the top rack; plates and pots on the bottom rack; and long serving utensils on the very top rack.

When loading the dishwasher:

  • Place sharp items so that they do not damage the door or seal.
  • Place knives in the silverware basket with handles up to prevent risk of injury.
  • Ensure that items do not protrude below the racks or silverware basket.
  • Do not wash plastic items in the dishwasher unless they are marked “Dishwasher Safe”.

Tines in the top and bottom racks can be raised or lowered depending on the items to be placed, thereby providing maximum flexibility. The silverware basket can also be moved from its usual spot to adjust the space in the bottom rack. The top rack is designed to be positioned at two levels. You can adjust the height of the rack by moving it on either the upper rail or the lower rail. Hold the top rack on the sides and lift up slightly and then push down to the desired height. Ensure that the rack locks in place. Ensure that the Upper and Lower Spray Arms can spin freely without hitting obstructions. Push the racks all the way in, ensuring the blue End Clips on the rails are locked.

Add dishwasher detergent into the bigger dispenser. (Note: detergent pods may not dissolve completely in short wash cycles). Add rinse aid into the smaller dispenser. This needs to be done only periodically and not before every wash cycle. The rinse aid indicator light will come on when the level is low and should be refilled soon.

Close the dispensers and then the door firmly until it clicks.

Setting the Wash Programs

EQUATOR-1840-18-Inch-Built-in-Dishwasher-fig- \(3\)

Press the Power button located at the far right on the Control Panel.

Select the Wash Program by pressing the Program button on the left side of the Control Panel. Once selected, the Program number (e.g. P1, P2) flashes on the Display Panel and also the number of minutes for the cycle.

The Wash Programs/Cycles are listed in the table:

Program Program I Cycle Temperature **Minutes***
OF oc
P1 ECO Sensor 131 55
P2 Auto Sensor 149 65
P3 Pots & Pans 149 65
P4 Heavy 149 65
PS DAILY 140 60
P6 Delicate 113 45
P7 Fast 50 122 50
PB Rinse    

This is the duration of the Program, with no options selected

Program Selection Information
In addition to referring to the Program table, the following descriptions of each of the Programs will be useful in determining which cycle to use.

  • P1 -ECO Sensor: Use this standard program for regular, normally soiled dishes.
  • P2 -Auto Sensor: Use to auto adjust time, temperature, water quantity and energy consumption.
  • P3 – Pots & Pans: Use for heavily soiled pots, pans and dishes with dried on debris.
  • P4 -Heavy: Use for heavily soiled dishes.
  • P5 -DAILY: Use for normally soiled daily dishes.
  • P6 -Delicate: Use for lightly soiled and fragile dishes and crystal.
  • P7 – Fast 50: Use for a 50-minute fast wash for normally soiled dishes.
  • PB -Rinse: Use to rinse only without detergent.

Sensor Programs
P1 & P2 Programs automatically adjust the cycle duration according to the soil level of the dishes. The programs start with the specified maximum time (140 for P1, 155 for P2). During the operation, the sensor measures the soil level of the dishes, and adjusts the time automatically depending on how much cleaning is needed. Water quantity and temperatures are also adjusted. Review the options in the middle of the Control Panel to select additional functions.

Extra button – You may select:

  • Sanitize – increases the water temperature in the final rinse.
  • Rinse – adds an extra rinse to the selected wash cycle.
  • Dry – increases water temperature.
  • Delay -You can delay the start of the program. Pressing this button will add time in one-hour increments. To cancel Delay, press and hold the Start button for 3 seconds.

Half Load/Hi-Temp button – Press this button to select half load and high temperature functions.

For Half Load, you can select Upper Basket, Lower Basket or both Baskets. The red LED light will show your selection. For Hi-Temp function, press and hold down this button for 3 seconds. This will increase the water temperature and the wash cycle time.

Start/Pause button
After the wash cycle and all optional functions are selected, press the Start button to begin the wash cycle. As the programmed cycle progresses, the LED indicator lights will show on the panel at each stage: wash, rinse and dry.

During a wash cycle, the Display Panel will show the time remaining in the cycle. If you press and hold down the Start/Pause button for 3 seconds, the program will cancel and stop. If you open the dishwasher door while the program is running, the machine will stop. If you close the door within 4 seconds, the program will continue running automatically. If longer than 4 seconds, press the Start button to resume the program.

Child Lock
To prevent children from playing with or operating the machine, you can activate Child Lock by pressing and holding Extra and Half Load buttons simultaneously for 3 seconds. “CL” will be displayed. To deactivate Child Lock, repeat the same instructions.

End of Program
When the wash program is completed, the display will show that the cycle has ended. Press the On/Off button to turn off the dishwasher.

Removing items after cycle is complete:

  • Do not remove dishes from the dishwasher until the program is complete.
  • Be careful of hot steam when opening the dishwasher after a wash cycle.
  • Check that the detergent dispenser is empty after the program is complete.

It is recommended that the lower rack in unloaded first and then the upper rack. This will prevent water from dripping from upper rack to lower rack and getting dishes wet.

Maintenance

Ensure the power cord is unplugged before moving or cleaning the back of the appliance. Clean the outside and inside of the appliance regularly, using water and mild detergent. Maintaining the inside of the dishwasher includes periodic cleaning of the filter and the two spray arms. Note: A small amount of residual water may remain at the base of the filter. This is normal.

Clean the filter at the base of the dishwasher regularly:EQUATOR-1840-18
-Inch-Built-in-Dishwasher-fig- \(4\)

  • Turn the Inner Plastic Filter counter-clockwise and remove it along with the Outer Mesh Filter.
  • Discard any food and debris that may have collected and rinse with water.
  • Lift out the Flat Metal Base and rinse with water.
  • Replace all these parts securely.

Clean the Spray Arms regularly.

Lower Spray Arm:

  • Remove the Lower Spray Arm by simply lifting it up.
  • Rinse under water to ensure smooth flow/spray from the holes.
  • Replace the Spray Arm, ensuring that it snaps back in place firmly.

Upper Spray Arm:

  • Turn the nut at the connecting point of the Spray Arm to release it.
  • Slide the Spray Arm off and rinse under water to ensure smooth flow/spray from the holes.
  • Replace the Spray Arm, ensuring that it clicks into place and the nut is tightened.EQUATOR-1840-18-Inch-Built-in-Dishwasher-fig- \(5\)

Troubleshooting

Problem Possible Cause and Solution
Program doesn’t start Check the fuse.

Check if it is plugged in correctly to the power source. Ensure the water inlet tap is turned on and hoses are not clogged.

Check that the door is completely closed.

Switch the dishwasher on by pressing Power button.

Machine stops during wash cycle| Power failure.

Water supply failure.

Water remains inside the dishwasher| Check if the drain hose is clogged or twisted. Ensure the filters are clean and not clogged. If the cycle has not finished wait for it to end.
Shaking & hitting sounds during wash cycle| Rotating spray arm is hitting obstructing items in the upper or lower basket. Open the dishwasher, remove or rearrange items, then close the door quickly and resume the cycle.
Dishes are not being properly cleaned.| Items are not placed correctly.

Not enough detergent is being used. Correct wash program is not being used.

Spray arms are clogged, not allowing water to be sprayed.

Check that filters and drain hose are correctly fitted.

Error Codes

If the following Error Codes are displayed, first check the Troubleshooting Guide and contact Customer Service to resolve problems.

DIAGNOSTIC MENU

Error Code| Description| Related Faulty Component| Part#

FF

| Water inlet system failure Check if water is flowing into machine| Water inlet valve Water inlet hose| 82140

82141

F1

| Overflow – Unplug machine and close water supply| Floater Connection Points|

82170

F2

| Water not being discharged

Stop program and check if filters or hose are clogged

| Drain hose Drain pump| 82125

82176

F3| Continuous water input – Close tap| Water inlet valve| 82140
F4| Flow meter failure| Flow meter| 82130
F5| Pressure system failure| Circulation pump Floater| 82177

82170

F6| Faulty heater sensor| Heater sensor| 82076
F7| Overheating| Heater

Heater sensor

| 82173

82076

F8| Heater error| Heater

Heater sensor

| 82173

82076

F9| Diverter mechanism failure that directs water flow to spray arms.| Diverter motor assembly| 82197
HI| High voltage failure| Power cord| 82172

Technical Specifications

Model 1840 (WBT / BBT / SBT)
Load Capacity 8 Place setting
Electrical 120V / 60Hz / 12A
Heater Power 1100 W
Rated Power 1400 W
Water Pressure 4.35 – 145psi
Water Consumption 3.2 Gallons
Weight Net / Gross 70.3 / 73.8
Product Dimensions (HxWxD) 32.3 x 17.6 x 22.4 (inch)

California Proposition 65

WARNING:
This product can expose you to chemicals including diisononyl phthalate (DINP) which is known to the State of California to cause cancer and birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

EQUATOR User Manuals

Related Manuals