CMS Electracom Nova Duo x GPO + USB A-C Charging User Guide
- June 16, 2024
- CMS Electracom
Table of Contents
CMS Electracom Nova Duo x GPO + USB A-C Charging
Product Information
The product is the Nova Duo AU, a versatile power and charging solution for desks. It is designed to provide easy access to power outlets and USB charging ports, allowing users to conveniently charge their devices while working.
Specifications
- USB AC Module: U
- AU/NZ Socket Outlet: A
- Engage: N
- Engage + RFID: R
- Factory-Only Insertable Modules
- 100W USB AC: V
- 140W USB AC: Y
- Above Desk Clamp
- Min Table Thickness: 20mm
- Max Table Thickness: 32mm
- Helistand: P
- Compatible Mounting Screws: 4G, 6G
Product Usage Instructions
Installation
To install the Nova Duo AU, follow these steps:
- Ensure that the table thickness is within the specified range of 20mm to 32mm.
- If using the above desk clamp, position it in the desired location on the table.
- If using the under-desk clamp, position it on the underside of the table.
- Secure the clamp in place using the compatible mounting screws (4G or 6G).
- Connect the USB AC Module (U) to the AU/NZ Socket Outlet (A).
- If desired, engage the RFID feature by connecting the Engage + RFID module (R).
- Insert any factory-only insertable modules as required. Refer to page 2 for module configuration.
Usage
Once the Nova Duo AU is installed, you can use it to power and charge your devices. Here are some usage instructions:
- Connect your device’s power cable to the AU/NZ Socket Outlet.
- If your device supports USB charging, connect it to the USB AC Module using a compatible USB cable.
- If using the Engage + RFID module, place your RFID-enabled device near the module to activate the RFID feature.
- The Nova Duo AU is designed to provide convenient power and charging access while working at your desk.
FAQ
- Q: What is the maximum table thickness that the Nova Duo AU can be installed on?
- A: The Nova Duo AU can be installed on tables with a maximum thickness of 32mm.
- Q: Can I use the Nova Duo AU with large smartphones?
- A: Yes, if you are using the Helistand and privacy screen, make sure to have a table scallop of at least 40mm to allow additional space for large phones.
- Q: What type of mounting screws should I use for the clamp?
- A: The Nova Duo AU is compatible with 4G and 6G mounting screws.
PARTS
- FACTORY-ONLY INSERTABLE MODULES REFER TO PAGE 2 FOR MODULE CONFIGURATION
DIMENSIONS
ABOVE DESK CLAMP
- MIN TABLE THICKNESS: 20MM
- MAX TABLE THICKNESS 32MM
NOTE
TABLE SCALLOP OF 40mm MINIMUM REQUIRED WHEN USING HELISTAND & PRIVACY SCREEN
TO ALLOW ADDITIONAL SPACE FOR LARGE PHONES
UNDER DESK CLAMP
- COMPATIBLE MOUNTING SCREWS: 4G, 6G
Installation Instructions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>