CAMDEN DOOR CONTROLS CM-3000 Series Illuminated Switches Instruction Manual

: June 17, 2024
: CAMDEN DOOR CONTROLS

Table of Contents

GENERAL DESCRIPTION
SPECIFICATIONS
APPLICATION
INSTALLATION
WIRING
LED WIRING
CM-3000 SERIES FRONT AND SIDE VIEW
PARTS INFORMATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CAMDEN DOOR CONTROLS CM-3000 Series Illuminated Switches Instruction Manual

THIS PACKAGE INCLUDES:

(1) 1 5/8″ (40 mm) diameter illuminated mushroom button
(2) 1/4″ (6.4 mm) thick brushed aluminum faceplate
(1) Normally open and/or Normally closed contact block
(1) Red, or green 12V LED
(1) Parts kit

GENERAL DESCRIPTION

Camden Door Controls CM-3000 Series Exit Switches are heavy duty push-buttons designed for industrial and commercial applications, where illumination is required. Buttons are 1 5/8” (40mm) in diameter, and are available in red or green (other colors on request). The faceplate is 1/4” thick brushed aluminum, in 1 3/4” or 2 3/4” widths. Optional duranodic (US40) finish is also available.

CM-3000 Series switches utilize UL listed switch components. Finished models comply with UL61058 Standard for Switches. Rated 10 amps @ 30 VDC, either momentary or maintained operation.

SPECIFICATIONS

Voltage: 12V or 24V Dc
Contact Rating: 6A @ 30V Dc
Switch Type: Momentary or Maintained
Standard Finish: Brushed Aluminum
Dimensions
CM-3000
4 1/2″ H x 2 3/4″ W x 1 3/4” D
(114 mm x 70 mm x 44 mm)
CM-3100:
4 1/2″ H x 1 3/4″ W x 1 3/4” D-
(114 mm x 44 mm x 44 mm)

APPLICATION

Camden illuminated Exit Switches are ideal for high traffic areas such as building front entrances and exits, as well as institutions, such as hospitals where an illuminated button is required. They can be surface, flush, or mullion (narrow stile) mounted.

Camden Illuminated Exit switches are designed to control electric locks, electro-magnetic locks, electric strikes, automatic doors, and handicap operators. They may also be used for automatic doors, shunting, bypassing alarms, request-to-exit, timed functions, and many other applications.

INSTALLATION

CM-3000, CM-3010, CM-3020, CM-3030, CM-3040 and CM-3050 are supplied with a brushed aluminum faceplate that can be easily mounted to a single gang electrical box. CM-3100, CM-3110, CM-3120, CM-3130, CM-3140 and CM-3150 are supplied with 1-3/4” brushed aluminum faceplate for door jamb mounting

CM-3000 BACK VIEW
INSTALLATION

WIRING

Momentary: When the switch is pressed the current pole will change to the opposite state until released.

Maintained: When the switch is pressed it will provide the opposite pole until the button is pressed again

WIRING LAYOUT & COLOR CODING

LED WIRING

For 12 VDC power connections, please connect your LED power leads directly to the center wiring terminals (X1 and X2) as shown Below.
LED WIRING

For 24 VDC power connections, please use the supplied resistor in-line wth one of the two center wiring terminals (X1 or X2) a shown Below.
LED WIRING

CM-3000 SERIES FRONT AND SIDE VIEW

SINGLE GANG FACEPLATE

MULLION FACEPLATE

SIDE VIEW

PARTS INFORMATION

MODEL NUMBERS

| MODEL NUMBER| QTY| DESCRIPTION
SINGLE GANG| MULLION
CM-3000| CM-3100| 1| SPRING RETURN BUTTON, MOMENTARY, NORMALLY OPEN CONTACT BLOCK
CM-3010| CM-3110| 1| SPRING RETURN BUTTON, MOMENTARY, NORMALLY CLOSED CONTACT BLOCK
CM-3020| CM-3120| 1| SPRING RETURN BUTTON, MOMENTARY, NORMALLY OPEN & NORMALLY CLOSED CONTACT BLOCK
CM-3030| CM-3130| 1| PUSH/PULL BUTTON, MAINTAINED, NORMALLY OPEN CONTACT BLOCK
CM-3040| CM-3140| 1| PUSH/PULL BUTTON, MAINTAINED, NORMALLY CLOSED CONTACT BLOCK
CM-3050| CM-3150| 1| PUSH/PULL BUTTON, MAINTAINED, NORMALLY OPEN & NORMALLY CLOSED CONTACT BLOCK
ORDERING INFORMATION FOR REPLACEMENT PARTS

ITEM NUMBER| PART NUMBER| DESCRIPTION
1| 60-66E000| ILLUMINATED RED MOMENTARY MUSHROOM BUTTON (DIA. 1 5/8’’)
60-66E004| LLUMINATED GREEN MOMENTARY MUSHROOM BUTTON (DIA. 1 5/8’’)
60-66E001| ILLUMINATED RED MAINTAINED MUSHROOM BUTTON (DIA. 1 5/8’’)
60-66E003| ILLUMINATED GREEN MAINTAINED MUSHROOM BUTTON (DIA. 1 5/8’’)
2| A| 60-41A003| ALUMINUM SINGLE GANG FACE PLATE 4 1/2’’H X 2 3/4’’W X 1/4’’D (114MM X 70MM X 6MM)
B| 60-41A004| ALUMINUM MULLION FACE PLATE 4 1/2’’H X 1 3/4’’W X 1/4’’D (114MM X 44MM X 6MM)
PARTS KIT

ITEM NUMBER| PART NUMBER| DESCRIPTION
3| FOR N-C CONTACT| (A) 6-32 X 3/4 FLAT HEAD PHILLIPS ZINC PLATED SCREW
(B) 6’’ ORANGE WIRE WITH INSULATED SPADE CONNECTOR
(C) 6’’ GREY WIRE WITH INSULATED SPADE CONNECTOR
(D) BLACK WIRE 6’’ CRIMP ON END WITH 2.2K OHM 1/4 WATTS
60-34B026
FOR N-O CONTACT| (A) 6-32 X 3/4 FLAT HEAD PHILLIPS ZINC PLATED SCREW
(B) 6’’ BLUE WIRE WITH INSULATED SPADE CONNECTOR
(C) 6’’ GREY WIRE WITH INSULATED SPADE CONNECTOR
(D) BLACK WIRE 6’’ CRIMP ON END WITH 2.2K OHM 1/4 WATTS
60-34B025
FOR N-O & N-C CONTACTS| (A) 6-32 X 3/4 FLAT HEAD PHILLIPS ZINC PLATED SCREW
(B) 6’’ ORANGE WIRE WITH INSULATED SPADE CONNECTOR
(C) 6’’ GREY WIRE WITH INSULATED SPADE CONNECTOR
(D) BLACK WIRE 6’’ CRIMP ON END WITH 2.2K OHM 1/4 WATTS
(E) 6’’ BLUE WIRE WITH INSULATED SPADE CONNECTOR
60-34B024
INDIVIDUAL CONTACT OPTIONS

ITEM NUMBER| PART NUMBER| QTY| DESCRIPTION
__ 4| 60-66C000| 1| NORMALLY OPEN CONTACT BLOCK
60-66C001| 1| NORMALLY CLOSED CONTACT BLOCK
60-66C002| 1| NORMALLY OPEN AND NORMALLY CLOSED CONTACT BLOCK
LED’S

ITEM NUMBER| PART NUMBER| DESCRIPTION
__ 5| 60-66B004| RED 12V LED
60-66B005| GREEN 12V LED
FACE PLATE ENGRAVED (IN BLACK) OPTIONS

ITEM NUMBER| ADD SUFFIX TO MODEL NUMBER| ENGRAVED GRAPHIC DESCRIPTION
6| CM-XXX/2| WHEELCHAIR SYMBOL
CM-XXX/3| PUSH TO OPEN
CM-XXX/3F| POUSSEZ POUR OUVRIR
CM-XXX/3S| EMPUJE PARA ABRIR
CM-XXX/4| WHEELCHAIR SYMBOLPUSH TO OPEN
CM-XXX/7| PUSH TO EXIT
CM-XXX/7F| POUSSEZ POUR SORTIR
CM-XXX/8| PUSH TO LOCK
CM-XXX/E| EXIT
COMPATIBLE MOUNTING BOXES

| PART NUMBER| DESCRIPTION
CM-3000 SERIES
CM-34AL| SURFACE MOUNT BOX WITH STANDARD DEPTH AND THREADED CONDUIT ENTRY. HEAVY DUTY CAST ALUMINUM2-3/4″H X 4-1/2″W X 1-3/4″D [70MM X 144MM X 44MM]
CM-66| FLUSH BOX & DRESS PLATE, STANDARD DEPTH BOX WITH 7’’ X 7’’ DRESS PLATE HEAVY GAUGE STAINLESS STEEL
CM-31| SLEEVE COVER FOR STANDARD 2 3/4″ X 4 1/4″ (69MM X 108MM) SURFACE ELECTRICAL BOX. HEAVY GAUGE STAINLESS STEEL
CM-CPC1| VANDAL AND WEATHER RESISTANT CLEAR LIFT COVER
CM-34BL| SINGLE GANG BLACK ABS BOX, SURFACE MOUNT 4 5/8″H X 2 7/8″ W X 1 3/4″D (117MM X 73MM X 44MM)
CM-34D| SURFACE MOUNT BOX WITH EXTRA DEEP. HEAVY DUTY GREY POLYMER 4 1/2”H X 2 3/4”W X 1 3/4”D [114MM X 70MM X 44MM]
CM-3100 SERIES|
CM-23D| SURFACE BOX WITH EXTRA DEPTH, FLAME AND IMPACT RESISTANT BLACK POLYMER (ABS) 4 1/2″H X 1 3/4″ W X 1 1/2″D [114MM X 44MM X 38MM]