V I V O PT-SD-AM02A-W Dual Monitor Arm for Desk Stand Instruction Manual

V I V O PT-SD-AM02A-W Dual Monitor Arm for Desk Stand

Dual Monitor Arm for Desk Stand

The Dual Monitor Arm for Desk Stand is a versatile and adjustable solution for mounting two monitors on your desk. It allows you to optimize your workspace and improve your productivity by providing a comfortable viewing position for your monitors.

Product Information

• SKU: PT-SD-AM02A/W
• Website: https://vivo-us.com/products/pt-sd-am02a
• Email: help@vivo-us.com
• Phone: 309-278-5303
• Operating Hours: Monday-Friday from 7:00am-7:00pm CST

Package Contents:

• (x1) Arm (A)
• (x2) VESA Plate (B)
• (x4) Cable Clips (C)
• (x2) M6 Cap Nut (S-A)

Tools Needed:

• (x8) M4x12mm Thumbscrews (M-A)
• (x1) 3mm Allen Wrench (T-A)
• (x1) 5mm Allen Wrench (T-B)
• (x1) 6mm Allen Wrench (T-C)
• Phillips Screwdriver

Assembly Steps:

1. Place Arm (A) onto the existing pole and secure it with the 6mm Allen Wrench (T-C). Attach Cable Clips (C) onto Arm (A).
2. Secure VESA Plates (B) to your monitors using the M4x12mm Thumbscrews (M-A).
3. Place the monitors with VESA plates on Arm (A) and secure them with M6 Cap Nuts (S-A).
4. Use Cable Clips (C) to route and organize cables as desired.
5. To adjust the tilt, loosen or tighten the adjustment screw on the VESA bracket using the 5mm Allen Wrench (T-B).
6. To level the monitors, remove M6 Cap Nuts (S-A) and adjust the adjustment screws using the 3mm Allen Wrench (T-A). Once level, secure the M6 Cap Nuts (S-A) back into place.

Note: Some hardware included may not be used. Refer to the user manual for additional information and specifications.

If you have any questions or need assistance, feel free to contact our support team:

• Email: help@vivo-us.com
• Phone: 309-278-5303
• Operating Hours: Monday-Friday from 7:00am-7:00pm CST

We hope you enjoy your new VIVO Dual Monitor Arm for Desk Stand!

Tag us in your photo if you love your new setup! @vivo_us
Last Updated: 11/28/2022 REV2
For more VIVO products, visit our website at www.vivo-us.com

SKU : PT-SD-AM02A/W

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

WARNING : CHOKING HAZARD

SMALL PARTS
NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

**PACKAGE CONTENTS

**

TOOLS NEEDED

NOTE : SOME HARDWARE INCLUDED MAY NOT BE USED

ASSEMBLY STEPS

1. STEP 1
   Place Arm (A) onto existing pole. To secure in place, tighten security screw using 6mm Allen Wrench (T-C). Place Cable Clips (C) onto Arm (A).

2. STEP 2
   Secure VESA Plates (B) to monitors using M4x12mm Thumbscrews (M-A).

3. STEP 3
   Place monitors with VESA plates on Arm (A) and secure with M6 Cap Nuts (S-A).

4. STEP 4
   Use Cable Clips (C) to route and organize cables as desired.

5. STEP 5
   Adjust tilt by loosening or tightening the adjusment screw on VESA bracket using 5mm Allen Wrench (T-B).

   • To level monitors, remove M6 Cap Nuts (S-A) and tighten or loosen adjustment screws using 3mm Allen Wrench (T-A). Once level, fasten M6 Security Nuts (S-A) back into place.
   • Monitors can be adjusted as desired.

Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us

LAST UPDATED: 11/28/2022 REV2

Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

• 309-278-5303
  AVG. RESOLUTION TIME (within office hrs): 5M 4S

• www.vivo-us.com Chat live with an agent!
  AVG. RESOLUTION TIME (within office hrs): < 15 M

• help@vivo-us.com
  AVG. RESPONSE TIME (within office hrs): 1HR 8M

  • 23% within < 15m
  • 38% within < 30m
  • 61% within < 1hr
  • 83% within < 2hr
  • 92% within < 3hr

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.  https://vivo-us.com/products/pt- sd-am02a

GET IN TOUCH
Monday-Friday from 7:00am-7:00pm CST

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

References

• Register a .US.COM domain today!
• VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
• Dual Monitor Arm for Desk Stand – VIVO - desk solutions, screen mounting, and more

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>