TRIPP-LITE DMCS60100XX Heavy-Duty Mobile Flat-Panel Floor Stand Owner’s Manual

DMCS60100XX Heavy-Duty Mobile Flat-Panel Floor Stand
Owner’s Manual

Heavy-Duty Mobile
Flat-Panel Floor Stand
Model: DMCS60100XX

DMCS60100XX Heavy-Duty Mobile Flat-Panel Floor Stand

CAUTION: DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR® surge protector in our monthly drawing! tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
NOTE: Read the entire instruction manual before you start assembly and installation.
WARNING

• Do not begin the installation until you have read and understood the instructions and warnings contained in this manual. If you have any questions regarding any of the instructions or warnings, please visit tripplite.com/support.
• This mounting bracket was designed to be installed and utilized ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
• This product should only be installed by someone of good mechanical ability, with basic building experience and a full understanding of this instruction manual.
• Make sure that the mounting surface can safely support the combined load of the equipment and all attached hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly, but do not over-tighten. Over-tightening screws can damage the items, greatly reducing their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

Warranty & Product Registration

5-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

• No purchase necessary. Void where prohibited. Some restrictions apply. See the website for details.
  Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

Component Checklist

IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty, visit www.tripplite.com/support for service.

Package P

Package M

Assemble the Base

Never Overtighten Screws

• Insert the right leg into the base. Align the holes in the right leg to the holes in the base. Secure with the screws. Repeat this step for the left leg.
• Each caster can be adjusted independently for fine-tuning. Slightly turn the nut to lower or raise the base.

2. Adjust Column Height
CAUTION: Hold the inner column when loosening the screws to adjust the height.

4. Attach Universal Plate to Columns

5. Secure Columns to Base

Assemble the DVD Shelf

7. Attach DVD Shelf to Columns

Use the Hex Key and screws to secure the DVD Shelf Assembly to the Columns’ Support Blocks.
Adjust the Columns to the desired height before installing the display.

Attach Adapter Brackets to Display

8.1 For Flat-Back Screens

8.2 For Recessed-Back Screens or Access to A/V Inputs

• Choose the appropriate screws, washers, and spacers (if necessary) according to the type of screen.
• Position the adapter brackets as close as possible to the center of the display.
• Screw the adapter brackets onto the display.

Hang the Display onto the Universal Plate

Make sure the display is correctly mounted before releasing the display.

• Hook the adapter brackets (attached to the display) onto the universal plate.
• Rotate the bottom screws counterclockwise to lock.
• Rotate the bottom screws clockwise to unlock.
• Use a padlock (not included) to prevent the display from being stolen.

Cable Management

Route the power and connection cables through the openings on the Left and Right Columns.

Assemble the Camera Shelf

Attach the Camera Shelf Assembly to the Universal Plate

Remove the Universal Plate’s two rear screws, then attach the Camera Shelf Assembly using the same screws just removed. Adjust the Camera Shelf Assembly to the desired height, then secure it by tightening the screws with a Philips screwdriver.![TRIPP LITE DMCS60100XX Heavy Duty Mobile Flat Panel Floor Stand

• Camera Shelf 1](https://manuals.plus/wp-content/uploads/2022/09/TRIPP-LITE- DMCS60100XX-Heavy-Duty-Mobile-Flat-Panel-Floor-Stand-Camera-Shelf-1.png)

 Adjustment

Maintenance

• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• For any additional questions, visit tripplite.com/support.

1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support

References

• Help Center | Eaton

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>