Thomson VH20BW01 Wet And Dry Vacuum Cleaner User Guide

Thomson VH20BW01 Wet And Dry Vacuum Cleaner

Dear customer,

Thank you for choosing Thomson wet and dry vacuum cleaner!

All Thomson products feature elegant distinctive design and easy, intuitive operation. Your new Thomson Wet and Dry Vacuum Cleaner can vacuum, wash and dry any surface at the same time. Cleaning your home has never been so quick and comfortable. The absence of wires allows you to clean even hard-to reach places. Please read these instructions carefully before using the appliance. After reading these instructions, you should not have any trouble using this Thomson product. Please keep these instructions in a safe place.

We are constantly improving our products and reserve the right to make changes that do not affect performance or safety of the product.

This product has been manufactured and sold under the responsibility of ELKO Rus LTD. THOMSON and the THOMSON logo are trademarks of Technicolor (S.A.) or its affiliates and are used under license by ELKO Rus LTD. Any other product, service, company, trade or product name and logo referenced herein are neither endorsed nor sponsored by Technicolor (S.A.) or its affiliates.

Please keep your sales check, Operating Instructions and Warranty Card until the end of the warranty period. If the Warranty Card supplied with the product is lost, it will not be renewed. The model you purchased and its accessories may differ from the images in the instructions.

Safety Precautions

This document includes safety instructions, precautions and operating instructions that may help you to avoid personal injury or property damage. Failure to comply with these instructions will make all warranty claims invalid. The manufacturer shall not be liable for any damage resulting from failure to comply with the instructions.

• This appliance can be used by children aged from 8 and above and by persons without experience or knowledge, or persons with reduced physical, sensory or mental capabilities, provided they have been instructed concerning safe use of the product, use the device under the supervision of a person responsible for their safety and understand the hazards involved. Do not allow children to play with this device. Do not allow children to clean or maintain the device unsupervised. Please keep the device and charger out of the reach of children under 8 years of age.

• This product is intended for domestic use only. The manufacturer is not responsible and the warranty is not applicable for any commercial or improper use, or failure to follow the instructions.

• This product is an electrical appliance: use it only under normal operating conditions.

• The vacuum cleaner is a device designed for cleaning rooms.

• Do not use the device if it has been dropped, has visible damages, or if it is not working properly. In this case, do not open the device, please contact customer service or an Authorized Service Center.

• Please keep an eye on children, do not allow them playing with the device.

• Cleaning and maintenance is the responsibility of the user, and must not be tasked to children without supervision.

• Never submerge the product in water or other liquids for cleaning.

• This product is intended for use in the home exclusively. It is not intended for use in rooms for cooking staff in stores, offices and other workplaces, in hotel, motel, guesthouse and other structures intended for receiving guests.

• If power cord the of the charger is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Unplug the product from electrical outlet when it is not in use, before cleaning, servicing or maintenance, and before installing or removing any moving brush head if supplied.
  Caution! Please keep packaging material (plastic bags, foam) out of the reach of children.

• Repairs should only be carried out by an authorized specialist or service company. Unqualified repairs may result in a serious danger to the user. Unqualified repairs will make warranty service of the product impossible.

• Do not load the water tank beyond the maximum mark.

• Claims of any kind for damage or injury caused by improper use of the product are not accepted. The owner of the product is responsible for such damages.

• The manufacturer is not responsible for damage or injury caused by not following the operating instructions, using the appliance for purposes other than its intended use, unprofessional repairs, making unauthorized modifications or using non specified spare parts.

• Make sure that the mains voltage indicated on the nameplate corresponds to the local mains supply. Any improper connection may cause permanent damage to the product and will void the warranty.

• The vacuum cleaner needs recharging after each use for keeping the battery fully charged to ensure optimal performance.

• If you are leaving for a long time (holidays, etc.) please unplug the unit, otherwise the charge level may reduce due to battery self-discharging.

• Unwind and straighten the power cable before using the device.

• Do not place the power cable on the objects with sharp edges. Do not run the power adapter cable across doorways or near heat sources. Make sure the cable is not twisted or kinked.

• Do not attempt to open the main body or remove any part of the device, there are no serviceable parts inside. The use of accessories that are not included in the delivery package is not recommended. This can be dangerous and should be avoided.

• Do not place the device on or near hot gas, electric burners, or in a heated oven.

• Make sure your hair and loose clothing parts do not get caught in the openings and between moving parts of the device and accessories, and do not touch them with your fingers, hands or any other parts of your body. Do not point tube, hose or nozzle toward other people’s eyes, ears or mouth.

• Do not touch rotating components of the device while it is running or plugged in.

• Do not incinerate out-of-work device for disposal, even if it is badly damaged. Batteries may explode when exposed to fire.

• The battery should be disposed of in a safe way.

• Before removing the battery, make sure the device is not plugged in.

• This device is equipped with batteries that should only be replaced by professionals.

• If you notice some fluid leak from the battery, avoid touching it. In case of unintentional contact, wash it off with water. If the fluid gets into your eyes, seek medical attention additionally. Fluid leaking from batteries may cause irritation or burns on your skin.

• Do not use the device if its cable or plug is damaged.

• Use only the charger specified by the manufacturer. The charger that is suitable for one type of battery pack may present a risk of fire when used with another battery.

• Do not pull the power cord while unplug the external power supply (charger) from the power outlet.

• Unplug the charger from the electrical outlet when not in use, before cleaning, servicing or maintenance, and before installing or removing any moving brush head if they are included in the delivery package.

• Remove the battery from the device before disposing of the product.

• Do not use the device if its cable or plug is damaged. If the product is not working properly, if it has been dropped, damaged, left outdoors, or submerged in water, take it to a service center.

• Use only the types and amounts of fluids specified in Operation section of this document.

• Do not use the vacuum cleaner to pick up any sticky substances (plaster, cement, etc.), large sharp objects (glass), harmful objects (solvents, abrasives, etc.), highly reactive (acids, cleaners, etc.), flammable or explosive substances (oil. alcohol, hot ash).

• Do not store the product outdoors.

• See Operation section for instructions on starting, charging, cleaning and servicing.

• Do not leave the vacuum cleaner in an unstable position (such as against the wall, table or back of a chair) if you make a pause in your room cleaning.

• Batteries are intended for indoor use only. Do not submerge them in water. Handle batteries with care. Do not put batteries in your mouth. Keep batteries away from metal objects (rings, nails, screws, etc.). Do not short-circuit the batteries by inserting metal objects into them. Short-circuiting may cause the battery temperature to rise to dangerous levels and result in serious skin burn or even a fire.

WARNING – There is a risk of fire or chemical burns if the battery installed in this device is used improperly. Do not disassemble or short- circuit the battery, do not store it at <0°C or >45°C, do not incinerate it. Keep the battery away from children. Do not disassemble or incinerate it.

• Do not use the vacuum cleaner in enclosed areas where there is a high concentration of oil-based paint fumes, solvent, insecticides, flammable dust, or other explosive or toxic fumes in the air. Do not use the vacuum cleaner to pick up foamy liquids.

• Do not insert any object into the openings. Do not allow dust, hair or anything that may reduce airflow getting into the openings.

• Prevent any contact of metal or conductive materials with the battery.

• Keep the product away from metal objects such as coins or paper clips when the battery pack is not in use.

• Do not splash any fluid at the equipment with electrical components.

• Connect the product to a properly grounded electrical outlet only. Do not modify the grounding plug.

• Do not touch the charger or its plug with wet hands.

• Do not short-circuit the battery pack and the output contacts of the charger station.

• Do not point the UV lamp at human or animals.

• Do not charge the device outdoors.

• Disconnect the product from mains power supply before removing the battery pack from the device.

• Do not shake the device, or the dirty water may get into its motor.

• Empty the dirty water tank when it is full.

• Do not recharge, disassemble, heat above 60°C, or incinerate the battery.

• Follow all charging instructions; do not charge the device when the temperature is out of the range specified in the instructions. Charging improperly or charging at temperatures out of the specified range may damage the battery and increase the risk of fire.

• Do not use the device for picking up hard or sharp objects such as splinter of glass, nail, screw, coins, etc.

• Do not turn the device on unless filters are installed.

• his model is intended for domestic use only.

• Keep the device on a flat surface when it is not running.

• A Li -ion battery naturally loses capacity over time compared to new device.

• Do not leave the device with roller brush running on the spot for a long time unless its handle is in the upright position.

Product Description

What is in the Package

• Handle
  

• Main Body
  

• Li-ion Battery Pack
  

• Charging Station
  

• Adapter
  

• Cleaning Tool & HEPA Filter Cleaning Brush
  

• Drying Tray
  

• Hex Key
  

• Manual instruction
  

• Warranty card
  

• Accessories may slightly differ. The pictures are for reference only

Product View

Clear Water Tank

Charging Station

Digital Display

| The indicator will light up white when appliance is in ECO Mode.
---|---
| The indicator will light up white when appliance is in MAX Mode.
| It shows the Working Time.
| The indicator will light up white when UV lamp is working.
| The indicator will flash RED when Clean Water Tank is short of water.
| The indicator will flash RED when Dirty Water Tank is full.
| Press the Self- Cleaning Button, the indicator will flash white slowly, and the unit will enter the self-cleaning mode.
| Battery Indicator. The indicator will flash white when charging; it will stop flashing after fully charged.

The indicators on the display may slightly differ from the final product.

Operation

Assembly

1. Remove the Handle, Main Body, Lithium-ion Battery Pack, Clean Water Tank, Dirty Water Tank, Roller Brush, Charging Station, Drying Tray and Cleaning Tool from the packaging box.

2. Insert the Handle into the Main Body until you hear a click.
   

3. Turn the Clean Water Tank over and insert it into the Main Body until you hear a click.

4. Press the Battery Lock Button, then insert the battery into the battery compartment and push lightly until you hear a click.

5. Align the bottom of the Dirty Water Tank with the inlet, then push in until you hear a click.

6. Insert the brush into the base as shown. Make sure that the retainer is aligned with the lock. Lock the brush in place.
   

Filling the Clean Water Tank

1. The Clean Water Tank is located on the back of the Main Body. Grasp the top of the water tank with your fingers and pull it up to remove.
   

2. Unscrew the water cap counterclockwise as shown below and add some water, then screw it back on and insert the Clean Water Tank into the housing.

   • Do not screw the cap too tight or too loosely otherwise the cap may break or the water tank may leak.
   • You may also add non-corrosive cleaning solutions to clean your floor. DO NOT add dirty water into the Clean Water Tank. DO NOT add water above the MAX mark.
   • It is okay to have a little water in the tank before the first use, because all products were tested during production.

Charging the battery

1. Insert the Charger into the slot in the Charging / Self-cleaning Station as shown below.

2. Attach the Drying Tray to the station. It is advisable to place the station close to the wall.
   

3. Two options available for charging the battery:
   A) Place the vacuum cleaner on the Charging Station and connect the power adapter so you can start charging.
   B) Remove the battery from the Main Body and charge it separately.

Note: Please charge the vacuum cleaner within 12 hours for the first time.

Working with wet vacuum cleaner

1. Check the Handle, Clean Water Tank, Dirty Water Tank, Lithium-ion Battery pack, and Roller Brush, making sure they are all installed correctly and tightly.

2. Press the Power Button on the Handle to turn the vacuum cleaner on. Press the Mode Button (MAX/ECO) to switch between two suction modes.
   
   Tips:

   • Do not use the vacuum cleaner on very long pile carpets.
   • DO NOT use wet vacuum cleaner to clean slick and delicate material carpets.
   • It is NOT advisable to spray liquids onto the carpet.

3. Hold down the Spray Button for 8 seconds to spray cleaning water/solutions before each use. While cleaning, spray water as necessary.
   

4. Grasp the handle and start moving the vacuum cleaner back and forth to wash the floor.

5. Try keeping the angle of the handle within 60.5 degrees (up and down). Do not shake the handle while working to avoid spilling the liquid.
   

6. Clean the Dirty Water Tank after each use.

Tips:

• The UV lamp is functioning automatically. The UV lamp will go down when you turn the vacuum cleaner off or the device detects it is not on the floor.
• DO NOT expose other people or animals to UV light.
• Be sure to clean Dirty Water Tank immediately after cleaning is complete.
• DO NOT turn the Main Body over until the Dirty Water Tank is emptied. Otherwise, dirty water may get into the motor and damage the unit.

Working with wet & dry vacuum cleaner

There is a button on the device that allows you to adjust the volume of the voice alerts. You can turn them off if you wish.

Self-cleaning

The device has a self-cleaning feature. To make use of it, place the vacuum cleaner on the Charging/Self-cleaning Station:

1. Make sure there is enough clean water in the Clean Water Tank. Empty the Dirty Water Tank before self-cleaning.
2. Place the device on the Charging Station (1) and hook up the power supply unit.
3. Press the Self-Cleaning Button (2), the indicator will flash white slowly and the device will spray clean water, cleaning the roller brush and pipes automatically.
4. Turn off the power supply unit and clean up the Dirty Water Tank after self-cleaning is done to avoid foul smell.
   

Caution: Make sure the Dirty Water Tank and HEPA filter are properly installed before self-cleaning.

Cleaning & Maintenance

Before servicing and cleaning, disconnect the device from mains power supply, turn off the device and remove the battery.
For daily care and maintenance, use a soft dry cloth to wipe the Main Body and Charging Station. Use a soft damp cloth to wipe the brush base, scraper and IR sensor.

Cleaning the brush

Open the roller brush lock, turn the brush counterclockwise, then remove the brush. Clean the brush and brush guard with the Cleaning Tool.

Cleaning the Dirty Water Tank

1. Press the Dirty Water Tank lock button and remove the Dirty Water Tank. Remove the HEPA filter and the cover.
   

2. Toss out the garbage into trash can, drain the dirty water out. Clean the Dirty Water Tank, the HEPA filter and the cover the clean water.
   

Cleaning the Self-cleaning/Charging Station

1. Disconnect the device from the mains power supply before cleaning.
2. Drain the dirty water out of the Charging Station, wipe the Charging Station and Drying Tray with a soft dry cloth.
   

Storage

1. Dry the Main Body, Clean Water Tank, Dirty Water Tank, Brush base, HEPA filter, Charging Station, Drying Tray.
2. You can store the Roller Brush in the Drying Tray.

Note

• Be sure to clean and dry the Dirty Water Tank after each cleaning to avoid any mold or odor.
• The device should be stored in a dry and ventilated area.
• Keep the product out of direct sunlight.
• Be sure to fully charge the battery at least once every 3 months to support good performance of the battery.

Recommendations

Note:
The above maintenance intervals are for reference only. Actual cleaning/replacement intervals should depend on usage.

Troubleshooting

• The unit is not properly connected to the mains power supply.
• The device is not properly connected to the station.

|

• Check the mains power supply connection.
• Put the device on the Charging Station again.

The Handle control does not work.|

• The battery is low.
• The Handle is not attached properly.

|

• Please check the battery and charge it fully.
• Re-attach the Handle.

The device does not work.|

• The Dirty Water Tank is full.
• The Dirty Water Tank is not attached.
• The Roller Brush is not attached.

|

• Empty the Dirty Water Tank.
• Check and attach the Dirty Water Tank.
• Please check and attach the Roller Brush.

The display of Clean Water Tank shows incorrect data.|

• The display is not calibrated.

|

• Take off the Clean Water Tank, turn the device on and press Spray button. Turn the device off until draining the pipe. Then press On and Eco/Max buttons simultaneously for 5 seconds until the digital display flashes two times, then check again.

Poor vacuum cleaning efficiency.|

• The HEPA filter is blocked.
• The HEPA filter is wet.
• The Scraper is not installed properly.

| •  Please check and clean the HEPA filter.

•  Dry HEPA filter first.

•  Check and re-install the Scraper.

The Clean Water Tank is leaking.|

• The Clean Water Tank is overfilled.
• The Clean Water Tank is not installed properly.
• The cap is not tightened up properly.

|

• Drain out some water until the water level is lower than snuffle valve.
• Re-install the water tank.
• Tighten the cap properly.

No water comes out when pressing Spray button.|

• The Clean Water Tank is empty.
• The Clean Water Tank is not installed properly.

|

• Fill up the Clean Water Tank.
• Re-install the water tank.

Voice Assistant does not work.| The voice is off or the volume is very low.| Turn the Voice Assistant on.
Self-cleaning Mode does not work.|

• The device is not hooked up to the mains power supply.
• The Dirty Water Tank is full.
• Clean Water Tank is empty.

|

• Hook up the device to the mains power supply.
• Empty the Dirty Water Tank.
• Fill up the Clean Water Tank.

Water drops at air outlet.|

• The HEPA filter is not properly installed.
• The device is tilted too much.
• Too much foam.

|

• Check and install the HEPA filter.
• Use the device correctly.
• Always empty the Dirty Water Tank in time.

Vacuum cleaner is shaking while running.|

• The Roller Brushed is not installed properly.

|

• Check and re-install the Roller Brush according to the instructions.

«The water tank is empty»

indication displays permanently.

|

• The HEPA filter is blocked.
• The Dirty Water Tank is full.

|

• Clean up the HEPA filter.
• Empty the Dirty Water Tank.

FF:01| Excessive voltage during charging.| Replace the charger.
FF:02| Excessive voltage during charging.| Replace the charger.
FF:03| NTC short circuit.| Replace the battery.
FF:04| The internal cable is not connected to the battery.| Replace the battery.
FF:05| Battery voltage is too low.| Check the connection or replace the battery.
FF:06| Excessive voltages drop in the battery pack.| Replace the battery.
FF:07| Battery temperature is too high.| Use the vacuum cleaner at normal temperature.
FF:08| Charging temperature is too high.| Charge the device when the temperature returns to normal.
FF:09| Charging temperature is too low.| Charge the device when the temperature returns to normal.
FF:10| Brush cannot rotate.| Check and clean the brush.
FF:12| The Dirty Water Tank is not installed.| Install the Dirty Water Tank.

Technical Data

Weight and dimensions are given approximately. Since we are constantly striving to improve our products, we may change the technical characteristics and design without prior notice.
User data may vary slightly due to differences in use or differences in environment.

Disposal

This symbol means that the product must not be disposed of with other household waste. To prevent any harm to the environment or human health from uncontrolled waste disposal of an out-of-work appliance, please return it for recycling for the benefit of efficient use of material resources.

• Please contact your local municipal authority for information on how to dispose this appliance.
• Disconnect the device from the power supply.
• Cut off the power cable and dispose it.
• The manufacturer and its authorized representatives are not responsible for the Buyer’s compliance with legal requirements for disposal of the appliance and the methods of disposal chosen by the Buyer.

Warranty period

The warranty period and the warranty conditions are specified in the warranty card. The Warranty Card is an inherent part of the shipping documentation included in the delivery package of this device. If there is no Warranty Card in the delivery package, request it from the Seller.
The Warranty Card provided by the Seller must comply with the form prescribed by the Manufacturer.
The manufacturer and authorized representatives of the manufacturer shall not be held liable for any direct or indirect damage caused by this device to people, animals, property as a result of failure to observe the operating and installation conditions, intentional or negligent actions of the consumer or third parties, as well as situations caused by natural or man-made force majeure event.

Customer Support

mythomson.com

References

• Television, home appliances, computers, audio & video by Thomson

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>