RAB Post Top Series Instructions

: June 4, 2024
: RAB

Table of Contents

RAB Post Top Series
FCC STATEMENT
LAMP INSTALLATION
SELECTABILITY
SELECTABILIIY
RAB WARRANTY
CONTACTS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RAB Post Top Series

RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighting.com

IMPORTANT

READ CAREFULLY BEFORE INSTALLING LED HID BULBS. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. RAB LED HID Bulbs must be wired in accordance with the National Electrical Code and all applicable codes.Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED

WARNINGS

Main applications include for use in post tops, street lights, flood lights and other suitable light fixtures.
Operating temperature: -30°C to 60°C (-22°F to 140°F).
These LED Lamps require all ballasts, capacitors, and ignitors to be bypassed or removed. Do not operate lamps on existing ballasts.
Do not use with standard dimmers.
This device is not intended for use with emergency exits.
For use in enclosed fixtures.
Before installation make certain the AC power to the fixture is off.
Risk of fire or electric shock. Luminaire wiring and electrical parts may be damaged when drilling for the installation of an LED retrofit kit. Check for enclosed wiring and components.
Risk of fire or electric shock. LED Retrofit lamp installation requires knowledge of luminaire electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Installers should not disconnect existing wires from lamp holder terminals to make new connections at lamp holder terminals.
Instead, installers should cut existing lamp holder leads away from the lamp holder and make new electrical connections to lamp holder lead wires by employing applicable connectors.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.
Use only with a portable luminaire that is provided with shade.
The added weight of the device may cause instability of a free-standing portable luminaire.
THIS RETROFIT KITIS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING JURISDICTION.
Please examine all parts that are not intended to be replaced by the retrofit kit for damage and replace any damaged parts prior to installation of the retrofit kit.
RISK OF FIRE OR ELECTRIC SHOCK. INSTALLATION OF THIS RETROFIT KIT REQUIRES A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE LUMINAIRE’S ELECTRICAL SYSTEM AND THE HAZARD INVOLVED. IF NOT QUALIFIED, DO NOT ATTEMPT INSTALLATION. CONTACT A QUALIFIED ELECTRICIAN.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

LAMP INSTALLATION

Remove old ballast or disconnect from existing lampholder. Remove and dispose of ballast in the correct manner. shown as figure 1. (North America 100-277VAC)
Reconnect directly to the existing lamp holder. Shown as in Figure 2 (North America 100-277VAC)
Select power and Clof a new LED replacement lamp before installation.
Install new LED replacement lamp. Shown as in Figure 3. Please make sure the old fitting is correctly earth. Attach the retrofit label to the luminaire. (North America 100-277VAC)

Securely fasten the earth fly lead cable to the main body structure. If the cable are damaged in any way please replace it. (Do not use existing burnt-out cables) The cable if needs replacement must be 1.0mm in size and insulated from heat.