MS PC1 Rechargeable Nail Drill Pen User Manual

MS PC1 Rechargeable Nail Drill Pen

Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer to it later.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING.
Toreduce the risk of burns, electrocution, fire or injury to persons.
Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.

NOTE: If the USB cable connects to the adapter, it is recommended to use an adapter of 5V/2A. Please do not exceed 5V/2A, or the drill will burn out.

Check before Using

1. Check the power supply cord before the first time use and during the life of the device. Do not use the device if it has a damaged cord or plug, or if it is not working properly.
2. Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
3. Use the original charger only.

Note for Battery

1. The Battery needs to be charged fully before first use to ensure optimal performance.
2. Do not overcharge the device or use it when it is charging.Charge the device in well-ventilated condition with 0°C-40°C.
3. Do not charge the device close to flammable or explosive materials. When charging the device, please do not cover it with clothes or other things.
4. If the device is not used for long periods of time, you should charge and discharge once every three months. In normal conditions, the battery performance will decline over several years.

Note for Using

1. To prevent electric leakage and shock or fire, do not draw out the connecting wires during use or touch the plug with the wet hand.Turn the power off after use.
2. Do not use the crooked or damaged nail drill bit orreplace the bit when power is on.
3. Do not adjust the speed abruptly, stop using once the unusual movement and noise happens.
4. Misuse, dropping or excessive force may cause device damage.
5. Minor should not use this device without parental consent and supervision.

Maintenance Work

1. Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
2. Do not keep the device in a metal box, car,or other places at high temperature(more than 50°C). Keep the hand piece dry and away from oil and grease.
3. Do notstore thedevice in a hot or humid environment. Store it in a cool and dry place.
4. Keep the electrical cord away from heated surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals or detergents.

Note for Injury

1.  Having manicures done frequently cancause injuries to the nails as well.
2. If you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with improper operation.
3. Do not use the device if you have an open wound on your nail or hand.
4. If you have any skin diseases,heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professionals before using the device.

The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions.
If you require any technical support, please contact us.

SAVE THE INSTRUCTION MANUAL

Two Drill Bits

• Ceramic Bit
  Surface work Cleaning & Prepping

• Mandrel+ Sanding Bands
  Surface work,shortening,and removal

1. ON/OFF ID
2. Speed Control
3. Indicator Light
4. Charging Port
5. Drill Bit

How to use?

Step 1: Choose one nail drill bit, and insert the drill bit into the handpiece in place.

Step 2: Press the ON/OFF button for 2 seconds to turn on or off the device.

Step 3: Press the Speed control to accelerate or decelerate the rotation speed.

Charging

1. Take outthe cordand connectitwith the DC socket.
2. The indicator light of the hand piece shows red and flashes, which means that the drill needs to be charged.
3. The indicator light of the hand piece shows green when the drill is fully charged.

Problem and Tenms of Settlement

1. Motorburns out 2.Bearing damages (Loud Noise)

| Turn off the powerwhen changing the nail drilbit.

The power is on

when not in use

| Turn off the power when not in use.

Long time, Large load work

| ****

1. Motorburns out 2.Device lifespan shortens 3.Bearing damages {Loud Noise) 4.Handpiece damages

| Thecontinuous working time should not be too longwhen theworking condition is in heavy load.

When the device is overheating, it should be stopped immediately to make it return to normal temperature.

Insert into a mismatched powersupply

| ****

1. Motorburns out

| According tothe device voltage requirements, insertthe matching power supply.

Put the power cord at random/Pull the powercord

| 1. Device lifespan shortens 2.Power cord brakes

3.Poor connection 4.Easy to cause short circuit

| ****

Do not pull the powercord.

Replace the original charger randomly

| 1.Device damages

2. Easy to cause short circuit

| ****

Use the original specification charger.

Dustintodevice| 1. Bearingdamages

(Loud Noise)

2.  Motor gets hot

3. Rotational speed

slowsdown 4.The potentiometer speed regulation fails

5. Handpiece

damages

| Clean dust, add the dust-proof protection of the dustproof hood.
---|---|---
Devicedropsto thegroundorby other impacts| 1.TheON/OFF

button doesn’t work 2.The potentiometer speed regulation fails

3.Handpiece

damages

| Avoid device dropsorby other impacts (If

the handpiece was damaged, it can be purchased separately.)

Replacedrill bit when handpiece is not completely stopped| 1.  The handpiece stucks and cannot betumedon

2. Handpiece damages

| Do not replace drillbitwhen handpiece is not completely

stopped.

Overcharge

| 1. Battery lifespan

shortens

| Not exceed the specified charging time
Thesizeof dril

bit is not suitable

| 1. Can not insert the dril bit into the device| Use standard

drill bit

Water into the device/Operate inwetor moist conditions/Use a wet cloth to clean the device|

1. Motor burns out

2. Device lifespan shortens

| Do not operate in wet or moist conditions/Only adryclothis allowed for cleaning.

Specifications
Input voltage range: 5V/2A
E-mail: service@melodysusie.com
E-mail: service.uk@melodysusie.com
Website: www.melodysusie.com

Warranty and Customer Service

MelodySusie offers a 6-month limited warranty on quality related issues. Please apply for your extra 6-month warranty extension and download the instruction manual in other languages by registering on www.melodysusie.com if needed.

Thank you for purchasing from MelodySusie.
You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.

https://www.melodysusie.com
US Service: service@melodysusie.com
UK Service: service.uk@melodysusie.com
FR Service: service.fr@melodysusie.com
DE Service: service.de@melodysusie.com
Whipple Rd, Union City, GA 94578

AMZLAB GmbH EU REP
_ Laubenhof 23, 45326 Essen, Germany
[UK BEP THEMIS AR support Itd.
85 Great Portland St. London, United Kingdom, W1W 7LT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>