ETAC Rex Wall Mounted Toilet Arm Support User Manual

September 3, 2022
Etac

Rex Wall Mounted Toilet Arm Support
User Manual
ETAC Rex Wall Mounted Toilet Arm Support

A

ETAC Rex Wall Mounted Toilet Arm Support - fig 1
B

1| 2| 3ETAC Rex Wall Mounted Toilet Arm Support - fig
4
4| 5| 6
7
| 8| 9

10
| 11
ETAC Rex Wall Mounted Toilet Arm Support - fig 12| 12
ETAC Rex Wall Mounted Toilet Arm Support - fig 13
C

ETAC Rex Wall Mounted Toilet Arm Support - fig 14
D

ETAC Rex Wall Mounted Toilet Arm Support - fig 15
E

ETAC Rex Wall Mounted Toilet Arm Support - fig 16
F

ETAC Rex Wall Mounted Toilet Arm Support - fig 17
G

ETAC Rex Wall Mounted Toilet Arm Support - fig 18

General, intended use

Thank you for choosing a product from Etac. To avoid injury during installation, handling and use, please ensure that you read this manual thoroughly and keep it. You can also find it at www.etac.com, where you will also find other documentation, including prescriber information. The Etac Rex is a wall-mounted toilet arm support designed as standing support for toilet use by persons with restricted mobility. The Etac Rex toilet arm support can be folded up when not in use. The Etac Rex toilet arm support with support legs is recommended where arm support for user weights above 135 kg is required (max 150 kg). Etac Rex is not designed to be used in any other way than described above. Etac Rex has been tested and complies with the requirements set out in EN ISO 10993-1, SS EN 12182. The product conforms to the requirements of the Medical evices Regulation (EU) 2017/745.

Delivery contents …………………………..Figure A

Installation options

It May be mounted on walls with sufficient loadbearing capacity only. Please ensure that suitable fixtures are used. For mounting in concrete, plywood, or wooden joists, we recommend the screw set accessory.
Mounting on walls with insufficient loadbearing capacity or with unsuitable fixtures can affect user safety. Mounting of the product and assessment of the wall’s loadbearing capacity must be carried out by a qualified person.

Installation …………………………………….Figure B

Usage ……………………………………………Figure C
Maintenance and safety ………………… Figure D

  1. Clean/disinfect the product with normal non-abrasive cleaning agents with a pH value of between 5-9, or with 70% disinfectant solution. Rinse and dry. The product is otherwise maintenance-free.
  2. The product can withstand cleaning in a sterilizer at 85°C for 3 minutes. This applies to reconditioning.
  3. Maximum user weight (see technical data).
  4. Check that the bolts are securely tightened. Defective or incorrectly installed products must not be used. In case of damage, contact your dealer.
  5. The heated product can cause burns. The materials used are corrosion-resistant. The materials used are resistant to all general disinfectants. In case of an adverse event occurred in relation to the use of the device, it should be reported to your local dealer and the national competent authority in a timely manner. The local dealer will forward information to the manufacturer.

Guarantee, service life
5-year guarantee against material and manufacturing defects. For terms and conditions, see www.etac.com.
Service life 10 years. For complete information regarding the service life of the product, see www.etac.com.
Accessories …………………………………… Figure E
1. Toilet paper holder 2. Storage basket 3. Screw set
Label placement ……………………………. Figure F
1. Product label (warnings, CE-marking)
2. Item no label (serial no, production date)
Technical data ………………………………. Figure GETAC Rex Wall Mounted Toilet Arm
Support - fig 19

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals