OMCAN IC-CN-0050 Ice Shaver Instruction Manual

OMCAN IC-CN-0050 Ice Shaver

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan, and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the external packaging, open the carton to ensure all ordered items are within the box, and there is no concealed damage to the machine. If the package has suffered rough handling, bumps, or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse for damaged products that were shipped collect or third party. Before operating any equipment, always read and familiarize yourself with all operation and safety instructions. Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save these instructions for future reference. Also, save the original box and packaging for shipping the equipment if servicing or returning of the machine is required.

Safety and Warranty

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be taken, including the following:

1. Read all instructions.

2. To protect against risk of electrical shock, do not put the appliance in water or other liquids.

3. Do not touch surfaces that may be hot.

4. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.

5. Avoid coming in contact with moving parts.

6. Do not operate the appliance with a damaged cord or plug, or after the unit malfunctions, or is dropped or damaged in any manner.

7. Do not use outdoors.

8. Do not place near a hot gas or electric burner or heated oven.

9. Do not let cord hang over the edge of the table or counter, or touch hot surfaces.

10. This appliance is intended for commercial use only. This appliance is designed to be used in commercial areas.

11. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or
    instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

12. Do not use the appliance for other than its intended use.

13. Where this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative finishes, etc., it is recommended that they be made of non-combustible material; if not, they shall be clad with a suitable non-combustible heat-insulating, material, and that the closest attention be paid to fire prevention regulations.

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

1-YEAR PARTS AND LABOUR BENCH WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the equipment.
Unauthorized maintenance will void the warranty. The warranty covers electrical and part failures, not improper use. Please see https://omcan.com/disclaimer for complete info.

WARNING
The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

290 x 390 x 430mm

Packaging Dimensions| 17.7” x 13.1” x 18.9”

450 x 334 x 480mm

Item Number| 47467

Operation

1. Open the lid of the hopper, clean the hopper with dry cloth, check whether the blade is installed firmly.
2. Check the condition of the power cord and plug.
3. Open the lid, put the right amount of the ice cubes into the hopper, then cover it.
4. Through the knob to adjust the blade to shave the ice cube into small pieces or a little bigger pieces.
5. The ice cube must be between 3-5cm.
6. There is a safety switch inside, which means the machine won’t work with a open cover.
   NOTE: Rotate the knob counterclockwise to the end before switching on the machine

NOTES

1. The machine must be used indoors.
2. Don’t use the machine for other than intended or specified purposes.
3. To avoid electrical shock, don’t place the cord or machine in water or other liquids.
4. Don’t operate the machine with wet hands or operate in a wet working environment.
5. Keep the machine and power cable away from heat sources and hot surfaces.
6. The machine is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge unless they have been given supervision or instruction concerning the use of the machine by a person responsible for their safety.
7. Don’t fill the hopper above its maximum indicated level.
8. Don’t place hands or any other items into the hopper while working.
9. Take extreme care and use appropriate tools when emptying or cleaning the hopper as the blade is very sharp. Don’t touch the blade with your hands.

Operation

1. Rotate the knob counterclockwise to the end before switching on the machine.

2. Rotate the knob clockwise slowly if smaller size ice is needed during operation.
   NOTE: Do not turn the knob counterclockwise during standard operation. Doing so may cause the already shaved ice to block the blade.

3. Press the reverse switch if the ice is blocking the blade during operation, and keep it on for 5s, the machine will start to work normally.

Parts Breakdown

Model IC-CN-0050 47467

Item No.| Description| Position| Item No.| Description| Position| Item No.| Description| Position
---|---|---|---|---|---|---|---|---
AL507| Cover for 47467| 1| AL526| Spacer 8 for 47467| 20| AL545| Small Drive Pulley for 47467| 39
AL508| Magnet for 47467| 2| AL527| Blade Support for 47467| 21| AL546| Motor for 47467| 40
AL509| Top Part for 47467| 3| AL528| Outer Hexagon Bolt M5x14 for 47467| 22| AL547| Outer Hexagon Bolt M10x25 for 47467| 41
AL510| Screw ST4x10 for 47467| 4| AL529| Outer Hexagon Bolt M5x32 for 47467| 23| AL548| Spacer 10 for 47467| 42
AL511| Front Panel for 47467| 5| AL530| Shaved Ice Guide Bushing for 47467| 24| AL549| Back and Side Shell for 47467| 43
AL512| On/Off Switch for 47467| 6| AL531| Adjuster Knob for 47467| 25| AL550| Cable Clip for 47467| 44
AL513| Pressing Ring for 47467| 7| AL532| Support Rods for 47467| 26| AL551| Power Cord for 47467| 45
AL514| Guiding Ring for 47467| 8| AL533| Hopper Base for 47467| 27| AL552| Fuse Cover for 47467| 46
AL515| Rotary Component for 47467| 9| AL534| Water Pipe 13×10-300 for 47467| 28| AL553| Handles for 47467| 47
AL516| Hopper for 47467| 10| AL535| Motor Support for 47467| 29| AL554| Capacity for 47467| 48
AL517| Inner Hexagonal Screw M8x20 for 47467| 11| AL536| Front Shell for 47467| 30| AL555| Wiring Harness for 47467| 49
AL518| Nut M8 for 47467| 12| AL537| Base for 47467| 31| AL556| Chief Axis for 47467| 50
AL519| Spacer 8 for 47467| 13| AL538| Water Pipe 17×14-800 for 47467| 32| AL557| Spring for 47467| 51
AL520| Blade for 47467| 14| AL539| Grid Cover for 47467| 33| AL558| Bearing 35x14x11 for 47467| 52
AL521| Screw M5x12 for 47467| 15| AL540| Feet for 47467| 34| AL559| Microswitch for 47467| 53
AL522| Spacer 5 for 47467| 16| AL541| Screw BT4x12 for 47467| 35| AL560| PE Bag for 47467| 54
AL523| Blade Adjuster for 47467| 17| AL542| Belt for 47467| 36| AL561| Left Foam for 47467| 55
AL524| Dowel for 47467| 18| AL543| Big Drive Pulley for 47467| 37| AL562| Right Foam for 47467| 56
AL525| Screw Arbor for 47467| 19| AL544| Holding Screw M5x15 for 47467| 38| AL563| Carton for 47467| 57

Electrical Schematics
Model IC-CN-0050 47467

Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation, and then send to the address specified below. You can also register online by visiting:https://omcan.com/warranty-registration/

For mailing in Canada
OMCAN
PRODUCT WARRANTY REGISTRATION 3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers. Today with partners in North America, Europe, Asia, and South America, we continually work to improve and grow the company. We strive to offer customers exceptional value through our qualified local sales and service representatives who provide convenient access to over 6,500 globally sourced products.

References

• Omcan
• Disclaimer – Omcan
• Warranty Registration – Omcan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>