comsol PML20BK Power Bank Charger User Manual

: June 13, 2024
: comsol

Table of Contents

Power Bank Layout
Features
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Model: PML20BK
20,000mAh Power Bank Charger comsol PML20BK Power Bank
Charger User Manual v1.3

Power Bank Layout

comsol PML20BK Power Bank Charger - Power Bank Layout

Features

Battery type: Lithium-Polymer
20,000mAh provides 720% extra battery for a smartphone*
Get an extra 50 hours of streaming video playback on an iPhone 12 or 40 hours on a Samsung Galaxy S20
Four LED indicators to show remaining capacity
Smart Power Chip identifies your device and provides maximum power for speedy charging times
Rechargeable more than 500 times
Includes 30cm USB-A to USB-C cable to charge power bank
Built-in over charging and short circuit protection
Watt Hour Rating: 74Wh
USB-C Input: DC 5V/2A
USB-A Output: DC 5V/2A
Total Output: 10W
Charging Time: Approx. 8 hours when using a 10W charger
Size: 161mm (L) x 63.5mm (W) x 22.5mm (H)
Weight: 352g
Certifications: RCM, RoHS, UN38.3

Charging the Power Bank

Using the included USB-A to USB-C cable, connect the larger USB-A connector to a USB wall charger
Connect the smaller USB-C connector to the USB-C input port on the power bank
During charging the digital LED display will flash to show charging capacity status
When charging is complete the LED display will show 100
Charging a Phone or USB Device
Using your phone or device’s charging cable, connect your phone or device to the USB-A output on the power bank
When your phone or device is connected, charging should commence automatically
If charging doesn’t start, press the On/Off button to start charging
When your phone or device is fully charged, the power bank will automatically turn itself off
Checking Remaining Capacity
Press On/Off button and digital LED will show the remaining percentage capacity
The display will turn off automatically after about 30 seconds
CAUTION
Do not drop, misuse or apply excessive force to your power bank. Power banks contain batteries and a circuit board with fragile components that can be damaged if misused. If you drop or damage your power bank, discontinue use immediately.
If crushed, punctured, exposed to fire or high temperatures or disassembled, batteries may catch fire, explode or cause burns.
If your power bank swells or bulges, stop use immediately and dispose of the power bank in an appropriate manner.
Continued use may cause the power bank to catch fire or explode.
Do not charge the power bank and your device at the same time. It may cause the power bank to overheat.
Store power bank in a cool and dry place. Do not store in hot or humid environments. Eg. In a car or directly in the sun.
Power bank usage by children should be supervised.
Do not put your power bank in a handbag, backpack or other bag where small metal objects can cause a short circuit.
Do not dispose of power bank in heat or fire.
All Comsol power banks have safety power cut off features to stop overcharging & overheating. However, we commend disconnecting the power bank once it is fully charged and removing all cables.
When charging a device, the power bank may feel warm, this is a normal operating condition & should not be cause for concern.
In normal conditions, battery performance will decline over several years.
Operating temperature should be between 10˚c to 45˚c.

iPhone, iPad and iPod are trademarks of Apple
Inc., registered in the U.S. and other countries.
* 720% is based on an iPhone 8 with battery
capacity of 1821mAh Made in China