DisplayPros 01 MODify Double Sided Kit Instruction Manual

MODify Double Sided Kit 01

MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Double Sided Kit 01 provides ample retail merchandise display space with its two-sided slatwall design. The push-fit fabric header enables the display of branding, promotions, or product identification.
Easily configure with casters, shelves, Ubars, slatwall hooks and other fixtures.

01 MODify Double Sided Kit

We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications
features and benefits:
Base Kit includes:
– Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
– Heavy-duty aluminum frame, steel base
– Steel, slotted uprights
– Double sided 35”W x 72”H slatwall display
– Frame topper with 35”W x 12”H SEG push-fit graphic, one on each side
– Base (casters are optional)
– Display is easy to assemble and install
– Lifetime hardware warranty against manufacturer defects
Optional Accessories Include:
– Casters.
– U bars
– Slatwall hooks
– Shelves
– Towel bars
– Faceout bars
– Waterfalls
dimensions:

Assembled unit:
37.5”W x 72”H x 37.5”D
952.5mm(w) x 1828.8mm(h) x 952.5mm(d)
Approximate Weight: 103 lbs / 46.72 kg| Packing case(s): 1 Box
Shipping dimensions: (62″L x 14″H x 24″D) 1574.8mm(l) x 355.6mm(h) x 609.6mm(d) Approximate shipping weight: 155 lbs / 70.3068 kg
Graphics| additional information:
Graphic material: Dye-sublimated fabric See graphic templates for graphic sizes.
Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here|

MODify Accessories

All Accessories available in white, black, or silver

Tools Required

How to Apply & Remove Graphics
Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.

Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage. 

Kit Hardware BOM

BOTH ENDS
| 004-883| 1| 883MM (34.76in) OF SWC EXTRUSION
| 004-1335| 2| 1335MM (52.56in) OF SWC EXTRUSION
| 005-879| 8| 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION
| 005-879| 1| 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION -WITH 29MM BOTTOM CUT
| 306-305-15-15| 2| 305MM (12.01in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS
| 306-883-15-15| 1| 883MM (34.76in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS
| 306-883-15-15| 1| 883MM (34.76in) LENGTH OF WMFCD EXTRUSION 45 DEGREE MITER CUT BOTH ENDS  WITH TWO HOLES
| 824-947| 1| 947MM (37.28IN) LENGTH OF 824 LEFT SUPPORT LEG
| 824-947| 1| 947MM (37.28IN) LENGTH OF 824 RIGHT SUPPORT LEG
| 833-1435| 1| 1435MM (56.50in) LEFT UPRIGHT
| 833-1435| 1| 1435MM (56.50in) RIGHT UPRIGHT
| 833-EC| 2| 7MM SEG PLASTIC END CAP FOR 833 EXTRUSION
| 835-883-01-01| 1| 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS
| 835-883-01-01| 1| 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS WITH TWO HOLES
| MFY-BOLT-.25-20-1| 2| 1/4″-20  x 1″L bolt
| MFY-BOLT-375-16-2.5| 2| 3/8-16 x 2.5″L bolt
| MFY-DB-36-17| 2| 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN
| VF-CC| 4| SINGLE VECTOR CORNER CLEAT

Kit Graphics BOM

size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner
| MFY-DS-01-B-G| 1| (38.65 w X 15.88 h total size ) 34.65 w X 11.88 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner

References

• The Exhibitors' Handbook
• Graphic Templates

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>