displaypros 3010 Blaze Freestanding Light Box Instruction Manual

June 13, 2024
displaypros

displaypros 3010 Blaze Freestanding Light Box

Product Information

The Blaze Freestanding Light Box 3010 is a double-sided light box with a durable 6 aluminum frame. It has dimensions of 30’w by 10’h (9144mm(w) x 3048mm(h) x 549.91mm(d)) and weighs approximately 391 lbs / 177.355 kg. The frame is available in Silver, White, or Black color options.

The light box features perimeter and interior LED light bars that are pre- attached to the frame, providing a glowing effect. The light bars include an internal power supply, eliminating the need for separate power supplies within the frame. This design minimizes
shadowing and cord management issues.

There are two backlit graphic material options available:

  • Backlit Textile: An 8 oz. tightly woven fabric that is slightly stretchy, foldable, and washable. It is suitable for multiple uses.
  • Intensity: A 6.5 oz. material with a smooth, coated finish. It is printed using a UV printing process, allowing for vibrant backlit graphics.

The product is shipped in multiple boxes, with dimensions and weights as follows:

  • 4 x BOXES: 79L x 9H x 11D (2006.6mm(l) x 228.6mm(h) x 279.4mm(d))
  • 1 x BOX: 24L x 14H x 8D (609.6mm(l) x 355.6mm(h) x 203.2mm(d))
  • Approximate shipping weight: 436 lbs / 197.766 kg

For more information, refer to the related graphic templates available at https://www.theexhibitorshandbook.com/downloads/download-graphic- templates.

Product Usage Instructions

LED Lights Connection:

  1. Use the included MULTI HEX KEY to connect the LED lights.
  2. Connect the LED lights end to end in a line. Do not connect lights at the center.
  3. Feed the power cable through the grommet hole.
  4. Use Y-CONNECTORS if necessary.

Applying & Removing Graphics

Installation:

  1. Push the SEG bead into each corner of the frame (1-4) using your thumb.
  2. Push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is properly secured in the extrusion profile.
  3. If needed, go around the perimeter again to ensure secure beading.

Note: Keep the setup area clean by using a drop cloth, washing hands before setup, or wearing gloves.

Removal:

Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.

Graphics Storage & Care:

Fold graphics with the graphic facing inward and store them in a zip lock or sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine on a gentle cycle with cool water. Line dry flat. Avoid dry cleaning to prevent shrinkage.

Blaze Freestanding Light Box 3010 is 30’w by 10’h, is double sided and features a durable 6” aluminum frame in your choice of Silver, White or Black. Perimeter, interior LED light bars are pre-attached to the frame and make the box GLOW. The light bars include an internal power supply, which means no separate power supplies within the frame, minimizing shadowing and cord management. Two backlit graphic material options are available to choose from, Backlit Textile (dye-sublimation printed) and Intensity (UV/LED printed). Backlit Textile is an 8 oz. tightly woven fabric that is slightly stretchy, foldable and washable; it is best for multiple uses. Intensity is a 6.5 oz. material that has a smooth, coated finish. The UV printing process allows Intensity to be double struck with ink creating vibrant backlit graphics.

We are continually improving and modifying our product range and reserve the right to vary the specifi cations without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications

features and benefits

  • 30’W x 10’H
  • 6” light boxes feature a sleek, aluminum frame, available in white, black or silver
  • Perimeter LED light bars are pre-attached to the frame
  • Light bars feature an internal power supply, which means no separate power supplies within the frame
  • Easy to assemble
  • UL Certified & ADA compliant feet, 3/16”h, approved for public spaces
  • 5 year LED warranty on lights; long life span – 43,800 hours for 5 years if powered 24/7
  • Lifetime warranty on frame
  • Comes in heavy duty box; hard-shell case is optional

dimensions

Hardware

  • Assembled unit: 360”w x 120”h x 21.65”d 9144mm(w) x 3048mm(h) x 549.91mm(d)
  • Approximate Weight: 391 lbs / 177.355 kg

Graphics

Graphic material: Backlit Textile (dye-sublimated fabric) or Intensity (UV printed)
See graphic templates for graphic sizes.
Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here

Shipping

  • Packing case(s): 6 Boxes
  • Shipping dimensions: 4 x BOXES (79″L x 9″H x 11″D) 2006.6mm(l) x 228.6mm(h) x 279.4mm(d) 1 x BOX (24″L x 14″H x 8″D) 609.6mm(l) x 355.6mm(h) x 203.2mm(d)
  • Approximate shipping weight: 436 lbs / 197.766 kg

additional information

Powder coat color options:

Tools Required

LED Lights

NOTE: A maximum of 20 LED fixtures can be connected in a line.

displaypros 3010 Blaze Freestanding Light Box-fig3

How to Apply & Remove Graphics

Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.

Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.

displaypros 3010 Blaze Freestanding Light Box-fig4

Graphics Storage & Care

Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.

SETUP INSTRUCTIONS

displaypros 3010 Blaze Freestanding Light Box-fig5 displaypros 3010 Blaze Freestanding Light Box-
fig6

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals