displaypros 03 MODify Single Sided Kit Instruction Manual

June 13, 2024
displaypros

**displaypros 03 MODify Single Sided Kit

**

MODify Single Sided Kit 03

INTRODUCTION

MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.

MODify Single Sided Kit 03 features two slatwall panels (right/left) and one center graphic panel. Customize your kit with fixtures such as shelves, waterfalls and hooks, or furniture like tables and risers. The center SEG push-fit graphic panel can be effortlessly replaced at any time, allowing you to keep your display up-to-date and on-trend.

features and benefits:

Base Kit includes:

  • Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
  • Heavy-duty aluminum frame, steel base
  • Steel, slotted uprights
  • Left & right 35”W x 96”H slatwall panels
  • Center graphic panel 35”W x 96”H
  • Non-rolling base
  • Display is easy to assemble and install
  • Lifetime hardware warranty against manufacturer defects

Optional Accessories Include:

  • Towel bars.
  • U bars
  • Faceout bars
  • Slatwall hooks
  • Waterfalls
  • Shelves
dimensions:
Hardware Shipping

Assembled unit:

110”W x 96”H x 20”D

2794mm(w) x 2438.4mm(h) x 520.7mm(d)

Approximate Weight: 226 lbs / 102.512 kg

| Packing case(s):

1 Box

Shipping dimensions:

(72″L x 20″H x 24″D)

1828.8mm(l) x 508mm(h) x 609.6mm(d)

Approximate shipping weight: 282 lbs / 127.913 kg

additional information:
Graphics| Powder coat color options:
Wood laminate color options:
additional information
Graphic material: Dye-sublimated fabric See graphic templates for graphic sizes.

Refer to related graphic templates for more information Visit:

https://www.theexhibitorshandbook.com/

MODify Accessories

All Accessories available in white, black, or silver

Slotwall Accessories
  • MFY-SLT-HK 4″, 6″, 8″, 10″ & 12″

  • MFY-SLT-FC 6″, 8″, 10″ & 12″

  • MFY-SLT-WTR-16-7
    MODify Accessories

U-Bar Accessories

  • MFY-TWL-FC 6″, 8″ & 10″

  • MFY-UBR-FC 6″, 8″ & 10″
    U-Bar Accessories

Shelf and Hanger Bars

  • MFY-36-12-SHELF

  • MFY-SLF-36-12-HB

  • MFY-SLT-TWL-36-3

  • MFY-UBR-36-12

  • MFY-DB-36-17

How to Apply & Remove Graphics

Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.
How to Apply & Remove Graphics

Note: Keep the set up area clean by using a drop cloth, washing hands before set-up or by wearing gloves.
How to Apply & Remove Graphics

Removal: Use the pull tab located on the graphic and gently pull the graphic from the frame, going around the perimeter.
How to Apply & Remove Graphics

Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.

SETUP INSTRUCTIONS

SETUP INSTRUCTIONS
SETUP INSTRUCTIONS
SETUP INSTRUCTIONS
SETUP INSTRUCTIONS
SETUP INSTRUCTIONS

Kit Hardware BOM

ITEM COMPONENTS QTY DESCRIPTION
004-883 4 883MM (34.76in) OF SWC EXTRUSION
004-2250 4 2250MM (88.58in) OF SWC EXTRUSION
005-879 28 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION
005-879 2 879MM (34.61in) LENGTH OF SLOTWALL EXTRUSION -WITH 27.75MM

BOTTOM CUT
| 824-512| 4| 512MM (20.16IN) SUPPORT LEG
| 830-2350| 2| 2350MM (92.52in) MIDDLE UPRIGHT
| 830-EC| 2| 7MM SEG PLASTIC END CAP FOR 830 EXTRUSION
| 831-2350| 1| 2350MM (92.52in) LEFT UPRIGHT
| 831-2350| 1| 2350MM (92.52in) RIGHT UPRIGHT
| 831-EC| 2| 7MM SEG PLASTIC END CAP FOR 831 EXTRUSION
| 835-883-01-01| 6| 883MM (34.76in) OF SINGLE SIDED SEG EXTRUSION -WITH CAM LOCKS BOTH ENDS
| MFY-36-17-BASE-PAN| 3| 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN
| MFY-BOLT-375-16-2.5| 4| 3/8-16 x 2.5″L bolt
| MFY-BRKT3| 6| WALL BRACKET

Kit Graphics BOM

ITEM COMPONENTS QTY DESCRIPTION
MFY-SS-03-G 1 (39.26 w X 96.61 h total size ) 35.26 w X 92.61 h finish

size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals