displaypros 04 MODify Double Sided Kit Instruction Manual

displaypros 04 MODify Double Sided Kit

MODify™ is a one-of-a-kind Modular Merchandising System that is made up of interchangeable fixtures and accessories that can be easily assembled, disassembled, and rearranged to create a variety of different display configurations. The MODify system incorporates SEG push-fit fabric graphics that enable you to brand, promote and merchandise with ease.
MODify Double Sided Kit 04 features three double-sided slatwall panels and six SEG push-fit graphic headers. Create the perfect layout of fixtures such as hooks, shelves, waterfalls and bars for this adaptable retail display.

Features and benefits

Base Kit includes

• Frame, slatwall, shelf and base colors in kit are all the same, your choice of all white, black, or silver
• Heavy-duty aluminum frame, steel base
• Steel, slotted uprights
• Three double sided 36”W x 96”H slatwall panels
• Six 36”W x 12”H SEG push-fit graphic headers
• Non-rolling base
• Display is easy to assemble and install
• Lifetime hardware warranty against manufacturer defects

Optional Accessories Include

• Towel bars.
• Faceout bars
• Waterfalls
• U bars
• Slatwall hooks
• Shelves

dimensions

Hardware

• Assembled unit:
  110”W x 96”H x 37.5”D
  2794mm(w) x 2438.4mm(h) x 952.5mm(d)

• Approximate Weight:
  342 lbs / 155.129 kg

Shipping

• Packing case(s):
  1 Box

• Shipping dimensions:
  (96″L x 14″H x 24″D)
  2438.4mm(l) x 355.6mm(h) x 609.6mm(d)

• Approximate shipping weight:
  406 lbs / 184.159 kg

Graphics
Graphic material: Dye-sublimated fabric
See graphic templates for graphic sizes.

Refer to related graphic templates for more information Visit: https://www.theexhibitorshandbook.com/downloads/download-graphic-templates or click here

Additional Information

MODify Accessories

All Accessories available in white, black, or silver

Tools Required

How to Apply & Remove Graphics

Installation and removal of SEG graphics is easy!
Installation: Push the SEG bead into each corner of the frame (1-4) with your thumb, then push the SEG bead into the middle of the run (5-8) and work your way around the perimeter of the frame until all beading is pushed in properly; if necessary, go around the perimeter again to ensure beading is secure in the extrusion profile.

Graphics Storage & Care
Graphics should be folded with the graphic facing inward and stored in a zip lock /sealable plastic bag. Spot clean by wiping with a damp white cloth. If washing is necessary, use a commercial size front-loading washing machine, gentle cycle with cool water. Line dry flat. Dry cleaning is NOT recommended to prevent shrinkage.

SETUP INSTRUCTIONS

LOCKS BOTH ENDS
| MFY-BOLT-375-16-2.5| 4| 3/8-16 x 2.5″L bolt
| MFY-DB-36-17| 6| 36in WIDE X 17.25in DEEP – DROP-IN BASE PAN

Kit Graphics BOM

MFY-DS-04-A-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
---|---|---
MFY-DS-04-B-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
MFY-DS-04-C-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
MFY-DS-04-D-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
MFY-DS-04-E-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)
MFY-DS-04-F-G| 1| (39.26 w X 15.07 h total size ) 35.26 w X 11.07 h finish size, Dye-sub print on Eclipse Blockout Stretch, single sided, sewn with FCE-2 silicone beading around perimeter & pull tab in bottom right corner (WITH 1/4″ NOTCH LEFT & RIGHT BOTTOM HORIZONTAL SIDE CORNERS)

References

• The Exhibitors' Handbook
• Downloadable Resources

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>