FIAMMA 07973-01 Side W Pro With Draft Skirt User Guide
- June 13, 2024
- FIAMMA
Table of Contents
FIAMMA 07973-01 Side W Pro With Draft Skirt
Product Information
The SIDE W PRO is a side panel with a crystal window designed for use with Fiamma awnings. It is available in various sizes and can be used with different Fiamma awning models including F45, F70, F65, and F80.
Product Usage Instructions
- Before installation, check that nothing has been damaged or deformed during transport.
- If you have any doubts or questions regarding the installation,use, or limitations of the product, contact your local dealer.
- Refer to the installation instructions provided on page 4 of the user manual for detailed guidance on how to install the SIDE WPRO.
- Once the SIDE W PRO is installed, refer to the instructions for use on page 7 of the user manual for information on how to use andoperate the product.
- In case of any problems or defects, contact your local dealer and provide them with the item identification number found on the nameplate. You can also consult the website for spare parts drawing.
- The product is covered by a warranty in accordance with local laws and regulations. Please refer to the warranty section on page 8 of the user manual for more information.
Please consult the website for instructions in the languages: NL-SV-DA-NO-FI- PT
Package contents
Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer
DIMENSION
INSTALLATION
In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.
SAFETY INSTRUCTION
- Fiamma declines all responsibility for any personal injury and damage to property due to incorrect assembly or use of the product; it is suggested to keep the instructions inside the vehicle.
- Keep the original packaging to be used in case of return. The assembly of the product must be carried out according to the assembly instructions: the product must not be modifi ed in any way. All our side panels are made with an high quality standard.
- Apart from our strict quality controls, we also have our fabrics continuously controlled by independent institutes to ensure that the fabric is tear resistant, they can hold the weight of water, the colours don’t fade and it is resistant against atmospheric agents. To guarantee a perfect quality, the fabrics are waxed or laminated several times.
- During this operation, single coloured pigments could move and thus create small bright spots in the material, which are only irregularities that are technically inevitable to avoid, but do not compromise the impermeability of the fabric.
- Irregularities in weaving (such as knots and thickening) are due to unavoidable manufacturing tolerances and are not grounds for complaint; do not prejudice in any way the qualities of the side panels.
- Especially with light fabrics, folds may form that backlight seems dark.
- They are irregularities of technically unavoidable materials due to the specifi c workings.
MAINTENANCE INSTRUCTIONS
Store the side panel only if it is dry and possibly clean. The remaining humidity could cause stains. If you are forced to close it when is still wet, after max. 12 hours reopen it to make it dry. Most of the dirt is superfi cial and can be removed with clean water and a cloth or a brush. If the fabric is very dirty, add some light cleaning detergent (Marseille soap). Any residual detergent on the fabric must be carefully rinsed. Be aware never to use any aggressive chemical substances and never to clean the fabric with a high pressure machine. Windows in transparent PVC: don’t use detergents which contain alcohol or solvents. Wash it only with hot water and soft cloth.
Warranty Fiamma
In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.
fiamma.com
Fiamma S.p.A. – Italy Via San Rocco, 56 21010 Cardano al Campo (VA)
fiamma.com
All rights reserved. Fiamma S.p.A. reserves the right to modify at any time, without notice, prices, materials, specifications and models or to cease production of any model.