V I V O MOUNT-POLE4 Pole Mount TV Bracket Instruction Manual
- June 13, 2024
- V I V O
Table of Contents
Pole Mount TV Bracket
Instruction Manual
MOUNT-POLE4 Pole Mount TV Bracket
SKU:
MOUNT-POLE4
https://vivo-us.com/products/mount-pole4
Scan the QR code with your mobile device or follow the link for helpful videos
and specifications related to this product.
https://vivo-us.com/products/mount-pole4
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity.
We cannot be liable for damage or injury caused by improper mounting,
incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
Phillips Screwdriver
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Remove the Nuts (A3) that hold the Mounting Bracket (A2) to the VESA Plate
(A1) using Wrench (T-C) Keep these aside for re-attaching the brackets. Remove
the Mounting Bracket from the VESA Plate.
STEP 2
Place Mounting Bracket (A2) around a compatible pole to the Clamp (D) using
6mm Allen Wrench (T-B), M8x55mm Bolts (S-A), and M8 Nuts (S-B) as shown
below.
STEP 3
Follow steps below corresponding to your VESA pattern. Attach the Left & Right
Brackets (B, C) to VESA Plate (A) using a M6x8mm Screws (S-C) and a Phillips
screwdriver.
STEP 4
Use appropriate Screws (M-A thru M-D), M8 Washers (M-E), and Spacers (M-F,
M-G) and secure VESA bracket assembly to your screen using a Phillips
screwdriver.
STEP 5
Attach TV and VESA assembly to Mounting Bracket (A2) using Nuts (A3) removed
in STEP 1 and Wrench (T-C). 
STEP 6
Use 4mm Allen Wrench (T-A) to loosen and tighten the tilt joint adjustment
bolts as shown below.
Adjust as Desired
THIS PAGE INTENTIONALLY LEFT BLANK
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 03/01/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team
can offer immediate assistance with rapid response times. If any parts are
received damaged or defective, please contact us. We are happy to replace
parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Pole Mount Bracket for 32" to 55" TVs – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>