tp-link Omada AX3000 Gigabit VPN Router User Guide

tp-link Omada AX3000 Gigabit VPN Router

Product Information: The product is a router and OC device. It comes with detachable antennas and rack-mountable brackets for installation options. It requires a DHCP server with DHCP function enabled for IP address assignment. The device can be powered on via a power cord/power adapter, a standard PoE device, or a USB power source.

Product Usage Instructions

1. Desktop Installation:
   • If there are detachable antennas, install them first.
   • Set the device on a flat surface to support its weight.
   • If the device has attachable rubber feet, remove the adhesive backing papers from the rubber feet.
   • Turnover the device and attach the supplied rubber feet to the recessed areas on the bottom at each corner of the device.
2. Rack Installation (Only for Certain Models):
   • Check the grounding and stability of the rack.
   • Secure the supplied rack-mounting brackets to each side of the device with supplied screws.
   • After attaching the brackets to the device, use suitable screws (not provided) to secure the brackets to the rack.
3. Power On:
   • Via Power Cord/Power Adapter: Connect the device to a power source using the power cord/power adapter.
   • Via Standard PoE Device (If Supported): Connect an Ethernet cable from the ETH1 (PoE IN) port of the device to a standard 802.3af or 802.3at or 802.3bt PoE device, such as a TP-Link PoE switch.
   • Via USB Power Source (If Supported): Connect a USB cable (not provided) from the micro USB port of the device to the USB power source.

Installation Guide
Routers & OC

Images may differ from actual products.

Installation

Desktop Installation
To install the device on the desktop, follow the steps below:
For models without attachable rubber feet, skip steps 3 and 4.

1. If there are detachable antennas, install the antennas first.
2. Set the device on a flat surface to support the entire weight of the device with all fittings.
3. Remove the adhesive backing papers from the rubber feet.
4. Turnover the device and attach the supplied rubber feet to the recessed areas on the bottom at each corner of the device.

Rack Installation (Only for Certain Models)

If your device is provided with rack-mountable brackets, you can install the device in a rack. Follow the instructions described below:

1. Check the grounding and stability of the rack.
2. Secure the supplied rack-mounting brackets to each side of the device with supplied screws.
3. After the brackets are attached to the device, use suitable screws (not provided) to secure the brackets to the rack.

Typical Network Topology

For Hardware Controller
A DHCP server (typically a router) with DHCP function enabled is required to assign IP addresses to the EAPs and the Hardware Controller in your local network.

Power On

• Via Power Cord/Power Adapter
  Connect your device to the power source via the power cord/power adapter.

• Via Standard PoE Device (If Supported)
  Connect an Ethernet cable from the ETH1 (PoE IN) port of your device to a standard 802.3af or 802.3at or 802.3bt PoE device, such as a TP-Link PoE switch.

• Via USB Power Source (If Supported)
  Connect a USB cable (not provided) from the micro USB port of your device to the USB power source.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Place the device with its bottom surface downward.
• The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.

For wireless products:

• Do not use the device where wireless devices are not allowed.
• Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of device. Please use this product with care and operate at your own risk.

For technical support, the user guide and other information, please visit https://www.tp-link.com/support/, or simply scan the QR code.

References

• CE Regulatory Compliance | TP-Link
• CE | TP-Link
• CE Regulatory Compliance | TP-Link
• CE | TP-Link
• WiFi Networking Equipment for Home & Business | TP-Link
• TP-Link
• CE Regulatory Compliance | TP-Link
• Support | TP-Link Australia
• CE | TP-Link

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>