anslut 018278 LED Head Lamp Instruction Manual
- June 13, 2024
- anslut
Table of Contents
anslut 018278 LED Head Lamp
Product Information:
Item no. 018278
Product Name: Head Lamp
Description: This head lamp is a portable lighting device that can be worn on
the head for hands-free illumination. It features a LED CREE XPG 3 3W bulb
with a maximum brightness of 300 lumens. The head lamp has a range of 89
meters and offers different lighting modes, including full brightness (100%),
half brightness (approximately 40%), and a red LED signal light. The head lamp
is powered by three LR03 (AAA) batteries and has a battery indicator to show
the remaining power. It is designed to be compact and
lightweight for easy use.
Technical Specifications:
- LED Type: LED CREE XPG 3
- Power: 3W
- Range: 89 meters
- Brightness:
- Full Brightness: 300 lumens
- Half Brightness: 60 lumens
- Red LED Signal Light: 70 lumens
- Color Temperature: 6500 K
- IP Rating: IP65 (dustproof and water-resistant)
- Battery: 3x LR03 (AAA)
- Dimensions: Width 60mm x Height 37mm x Depth 44mm
- Weight: 61g
Product Usage Instructions
- Read the user instructions carefully before use.
- To insert the batteries, open the battery compartment and insert three alkaline batteries (LR03) with the correct polarity.
- To turn on the head lamp, use the switch located on the lamp itself.
- Select the desired lighting mode using the function switch. The available modes are full brightness (100%) and half brightness (approximately 40%).
- For signaling purposes, there is a red LED signal light available. Use the function switch to activate it.
- The head lamp also has a battery indicator to show the remaining power. Refer to the battery indicator on the lamp for the battery status.
- Avoid looking directly into the light source to prevent eye strain or damage.
- Store the head lamp in a safe place when not in use.
- Follow local regulations for the proper disposal and recycling of the product.
HEAD LAMP
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions).
Care for the environment!
Recycle discarded product in accordance with local regulations.
SAFETY INSTRUCTIONS
WARNING!
The product emits optic radiation that can result in a risk of personal injury. Do not look at the light source when it is switched on – risk of eye damage.
- Do not point the light beam at people or animals – risk of blinding and permanent eye damage (retina).
- Keep children under supervision to make sure they do not play with the product.
- Do not expose the product to heat, mechanical stress or anything else it is not intended for.
SYMBOLS
- Read the instructions.
- Approved in accordance with the relevant directives.
- Recycle discarded product in accordance with local regulations.
- Do not look at the light source.
TECHNICAL DATA
- Light source LED CREE XPG 3
- Output 3 W
- Range 89 m
- Luminous flux, full beam 300 lm
- Luminous flux, dimmed beam 60 lm
- LED signal lamp red 70 lm
- Colour temperature 6500 K
- Protection rating IP65
- Battery 3x LR03 (AAA)
- Battery life full beam approx. 2 h
- Battery life dimmed beam approx. 10 h
- Size W60 x H37 x D44 mm
- Weight 61 g
DESCRIPTION
Main spotlight with full and dimmed beam, dimmed spotlight with full and dimmed beam, red LED signal lamp. The product is drop tested from 2 metres.
- Power switch
- Function selector button
- Battery indicator
FIG. 1****
USE
Insert three alkaline batteries (LR03) with the correct polarity.
LIGHT
Press the switch to switch on and off the main and dimmed beam and to select
the luminous flux. Press five times to switch off the product.
Full beam (100%)
Press twice for full beam with white, focused light.
Dimmed beam (approx. 40%)
Press once for dimmed beam with white, focused light.
Dimmed spotlight dimmed beam
Press three times for white, diffuse dimmed beam.
Dimmed spotlight full beam
Press four times for white, diffuse full beam.
SIGNAL LIGHT
Press the function selector button (2) to activate the red LED signal lamp on
the front of the product. Press the function selector button three times to
switch off the red signal lamp.
Constant
Press the function selector button (2) once.
SOS signal (…—…)
Press the function selector button (2) twice.
BATTERY INDICATOR
Press the button and hold to activate the battery status indicator. The
battery status is shown for 5 seconds when the indicator is activated.
FIG. 2
MAINTENANCE
CLEANING
Do not use strong detergents or solvents, this can damage the plastic parts. Clean the product with a dry, lint-free cloth.
STORAGE
Remove the batteries if the product is not going to be used for some time to prevent damage from battery leakage.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>