VEVOR BY-300 Ice Crusher User Manual
- October 26, 2023
- VEVOR
Table of Contents
BY-300 Ice Crusher
User Manual
Operation instructions
- Check whether the power voltage conforms to that on the designation plate and the power should connect to the reliable ground wire.
- Raise the ice crushing handle to the upper stop, connect to the power, turn on the master switch and place the ice basin on the underframe with the ice cubes put into the ice crushing barrel.
Note: The quantity of the ice cubes should not exceed the ice-crushing barrel level). Then press down the ice pressing handle to make the protective switch automatically turn on and crush the ice. After finishing, please raise the ice-crushing handle to the upper stop again and repeat the above-mentioned operation process.
Keep clean
After using the ice crusher, the switch should be turned off. Disconnect the power plug and wipe the body with a soft cloth, then place the machine on the dry place.
Insert Fastener in FreeCAD Assembly...
Insert Fastener in FreeCAD Assembly | FreeCAD Tutorial | FreeCAD Fasteners | Mechnexus |
Cautions
When using, the outlet of ice cubes cannot be jammed or the cutter head may
get stuck and the motor may be burnt out, If the abovementioned conditions
appear, please find out the reasons immediately, cut off the power and raise
the handle.
No-load running is forbidden, which will cause the motor to burn.
Note: in order to continuously improve our products, our company has a right
to modify the above-mentioned technical parameters without giving
notification.
Technical parameters
- Voltage: 110-120V/220-240V
- Power: 300W
- Frequency: 50Hz-60Hz
- Weight: 5.5-9Kg
- Revolution: 1450R/61
- Crushing weight: 95kg per hour