Fillamentum OBC 905 Olefinic Block Copolymer Instructions
- June 3, 2024
- Fillamentum
Table of Contents
Fillamentum OBC 905 Olefinic Block Copolymer Instructions
Specification
- Printing temperature: 215–195 °C
- Hotbed temperature: 90–105 °C
- Speed: 20–40 mm/s
- Part cooling fan: 25–50 %
- Hotbed surface: Glass/Mirror, Lock pad, (PEI)
- Adhesive: Maggio PP (packaging pp tape)
- Raft/skirt/brim: Brim 10 mm / raft
- Heated chamber/enclosure: not required, but it helps
Instruction
Adhesion
We recommend to use Maggio PP for the bed preparation, wide brim is also
recommended
Cooling
For standard models maximum part cooling fan speed is 25 to 50 % from 5 th
layer. If you are printing difficult parts/models with overhangs and supports,
you can go up to 75 %. Be careful with the part cooling fan speed – too much
flow can increase warping effect.
Speed
Around 30-35mm/s is good starting point as this material is flexible.
Depending on the printer and the settings.
Extrusion
Recommended settings is 1.05 – 1.1 for extrusion multiplier due to flexibility
of the filament.
This gave us the best results.
Customer Support
Producer:
Fillamentum Manufacturing Czech s.r.o.
tel.: (+420) 702 236 177
nam. Miru 1217, 768 24 Hulin
Czech Republic
e-mail: [email protected]
web: www.fillamentum.com