Nikolaou Tools EC1350 Brushless Cordless Drill Instruction Manual

: June 10, 2024
: NIKOLAOU TOOLS

Table of Contents

CONTENTS
SPECIFICATIONS
PRODUCT OVERVIEW
GENERAL SAFETY INSTRUCTIONS
SAFETY PRECAUTIONS
MAIN PARTS
PROPER USE AND MAINTENANCE
MAINTENANCE
ENVIRONMENTAL DISPOSAL
- Only for EU countries
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Nikolaou Tools EC1350 Brushless Cordless Drill

Nikolaou Tools EC1350 Brushless Cordless Drill

SPECIFICATIONS

Technical Data

The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.

PRODUCT OVERVIEW

The products are battery-driven electric pruning shears, composed of a fixed blade, a movable blade, a lithium battery, a charger, a tool case and an accessories kit. The charging voltage is AC 110V-240V. The products can be used for shearing, fruit branch grafting, harvesting in orchards etc. They are easy to use and easy to handle. The branch shearing quality is significantly higher than traditional manual shears.

GENERAL SAFETY INSTRUCTIONS

Please read this manual
Only charge the battery
With double insulation, no ground connection
Fault safety transformer
In case of overheating during charging, it will be automatically switched .
Do not dispose of chargers like household
Do not dispose of batteries like household

SAFETY PRECAUTIONS

Workplace conditions

Always work in a clean and bright space. Chaotic and/or dark workplaces may lead to
Do not operate the electric pruning shears under humid or flammable
Operate the tool away from children or other audience to avoid distractions that may lead to damages or other

Electric safety

The battery socket of the electric pruning shears must be compatible with the battery connecting plug. Do not disassemble or rebuild socket or plug in any
Do not expose the electric pruning shears to rain or any humid Water or other liquids may increase the danger of short-circuit or electric shock and cause damage or other harm.
Do not abuse electric wires. Do not use the wires to lift or pull the electric pruning shears in any Do not pull on the plug. Keep the electric pruning shears away from any sharp edges or moving parts. Do not use chargers when wires or plugs are damaged. Damaged and intertwined wires will increase the risk of electric shock.

Personal safety

While operating, any distractions may lead to serious
Use appropriate safety Αlways wear safety goggles, face mask, non-slip safety shoes, helmet and earplugs to reduce chance of damage or injury.
Before starting the electric pruning shears, remove all adjustable keys or Wrenches or keys left on the rotating parts may cause damage or injury.
Do not overstretch your hands when operating. Keep you hands away from the shearing areas. Make sure that any material or surface under the shearing area will not be damaged by the Stand on firm ground and keep good balance while working to avoid accidents.
Dress Do not wear loose clothing or accessories that can get tangled in moving parts. Keep your hair, clothing and sleeves away from any moving parts.

Other safety measures

When non-shearing objects are placed in the opening, immediately release the The moving blade will automatically return to the open position.
When shearing objects are too tough to cut, release the trigger promptly and the moving blade will automatically return to open
When batteries will not charge, first check whether the charger is correctly attached to the product. Then check that the charging voltage is in accordance with the voltage on the type
In case of electric or mechanical faults, close the switch off
In cases of not operating under present instructions, the batteries may leak Keep away from such liquids. If it comes to contact with skin by accident, rinse with clean water. If it comes to contact with eyes, rinse with clean water and immediately seek medical advice. Liquid discharged from batteries may cause irritation or burns.

Carefully read all safety warnings and instructions before use.

Do not use or expose the tool in rain.

Do not close the blades by hand to avoid damage and/or serious injury

MAIN PARTS

Main Parts

Moving blade
Shim
Dowel
Trigger
Lithium battery
Charger
Power switch

PROPER USE AND MAINTENANCE

Remove the tool, install the lithium battery, press and hold the power switch for three seconds and then let go. After hearing the sound of two drops, it means the battery is powered up
Quickly press down the trigger twice; the blade opens
Before doing any work, press the trigger to operate the blade blank for several times and listen for any unusual noise or observe if the blade runs unusually slow or fast. If everything appears to be running properly, start
To switch off, press the trigger and release it after you hear the sound of two drops. The blade will close

Notes

When using the tool continuously for a long time, there is a possibility of overheating. Make sure that you use the tool correctly.
After completing any seasonal pruning work or when replacing the blade, you should remove the blade and add lubricating oil between the blade formaintenance.

Battery charging

The battery of the new product is not fully charged. To charge it, insert the battery into the charger and plug the charger into a power outlet. The charger’s indicator light turns red, which shows that the battery is charging. When the charger indicator light turns green, the battery is fully charged and you can then use it.

CAUTION!

While charging, it is normal for the charger and/or battery to heat up
If the batteries are not used for a long time, they should be recharged every 3 months for a longer
New batteries or batteries that have not been used for a long time require 5 times longer charging time to reach maximum
Do not charge batteries repeatedly after a few minutes of operation, as this can reduce battery life and efficiency
Do not use damaged batteries and do not disassemble the charger or
Batteries contain flammable materials, keep away from flame/heat. (Risk of explosion!)
Do not charge batteries outdoors or in a humid
With the gradual reduction of the battery load, it is normal for the maximum cutting diameter to
Do not use the electric pruning shears while

Blade oiling

Disconnect the power to the scissors before such a task

Re-apply lubricant before using the blades or after using them for more than 4 hours.

Keep the blades open and add 1-2 drops of lubricant to the connection between the moving and fixed blade (as shown in the picture).
Open and close the blade several times to evenly distribute the lubricant.

Blade tension adjustment

Disconnect the power to the scissors before such a task

Keep the blades open and check for lateral swings. Lateral swing is an abnormal condition, which creates a gap between the two blades, leading to the gear teeth not being able to bite properly, which can damage the mechanical structure. The blade needs to be locked (not too tight).

Blade replacement

Disconnect the power to the scissors before such a task

Remove the battery to ensure safe working conditions and replace the blade step by step as shown below.

Unscrew the screws with a screwdriver and open the lid.
Remove the screws from the blade nut retaining buckle (this step is critical)
Remove the blade nut.
Unscrew the pin and remove the moving blade
Remove the fixed blade
When replacing the blades, lubricating oil needs to be added in between.
Replace each blade.
Insert nut.
Insert the lock nut.

After replacement, clean the tool, turn it on to test it and close the blade to finish.

Note: Shim and moving blade can be adjusted independently. Do not be afraid of the blade opening being too small after replacing it. After switching on, the normal opening size is restored automatically

MAINTENANCE

Notes

Do not use the tool for cuts outside the cutting range or for non-plant materials such as metals, stones, Do not use it as a vise clamp for clamping tools. Replace a cutting blade immediately if it is worn out or damaged.
Please keep all equipment clean, use a dry, clean cloth to clean the blades, batteries and chargers (do not use corrosive or solvent detergents) and use a soft brush or dry cloth to remove dust from the top of the
Do not soak electric pruning shears, batteries or chargers in water or any other
Please use equipment correctly, as Immediately stop using if there is any damage on the electric shears, batteries or charger.
If the switch does not work properly, do not use the electric pruning Using the electric pruning shears without a switch can be extremelly dangerous and the tool must be placed under repair.
Make sure that the switch is turned off while replacing parts or when storing the electric pruning shears. Such a preventive measure will reduce the risk of the accidental starting of the
Store and keep the electric pruning shears away from children to avoid It is also dangerous to let inexperienced or untrained users to operate the electric pruning shears.
When using the electric pruning shears, follow the appropriate operating instructions and make sure that the weather conditions are suitable for work. Damage or injury can result from improper use of the
After each use, remove any dirt from the moving blade and shim, add lubricating oil to the contact point and follow all blade maintenance instructions to ensure the shears are ready for each subsequent use and to extend their lifespan

Battery maintenance

Make sure the switch is turned off before connecting the battery. If the switch is on, an accident may
Use only the chargers specified by the manufacturer to charge the Chargers with non-compatible batteries pose a fire hazard when charging.
When batteries are unused, please move them away from tiny metal objects such as paper clips, coins, keys, nails and screws, which can shorten their lifespan.
Short-circuiting a battery may result in a burn injury and present a fire
Do not disassemble or rebuild
Do not use short-circuit
Do not charge around a heat
Do not put batteries in
Do not charge near fire or directly under the
Do not drive nails into the batteries, do not hit the batteries with a hammer, do not step on or throw away the batteries.
Do not use batteries with severe visible damage or
Do not weld batteries
Do not charge batteries reversly, connect them in an anti-polar position or discharge them
Do not plug batteries into a vehicle’s recharge or cigarette lighter
Do not use the batteries on non-assigned
Do not make direct contact with lithium
Do not put batteries in high-temperature or high-pressure containers, such as microwave ovens,
Do not use leaking
Do not let children to come into contact with batteries
Do not place batteries under direct sunlight (or in cars under direct sunlight), it may cause overheating, damage the battery function and shorten its
Do not use batteries in static spaces (exceeding 64V).
Do not use the batteries if there is corrosion, unpleasant smell or any other
If there is battery contact with skin or clothing, rinse with clean
If electric pruning shears are not used for a long period of time, recharge it fully before

ENVIRONMENTAL DISPOSAL

In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of recyclable materials and can be disposed accordingly. The tool’s plastics components are marked according to their material, which makes it possible to remove environmental friendly and differentiated because of available collection facilities.

Only for EU countries

Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility

The power tools have been manufactured according to strict standards, set by our company, which are aligned with the respecve European quality standards. The power tools of our company are provided with a warranty period of 24 months for non-professional use, 12 months for professional use and 6 months for baeries. The warranty is valid from the date of purchase of the product. Proof of the warranty right is the purchase document of the tool (retail receipt or invoice). Under no circumstances shall the company cover the relevant cost of spare parts and respecve required working hours unless a copy of the purchase document is presented. In case the repair has to be done by our service department the cost of transportaon (to and from) is enrely borne by the sender (client). The tools must be sent for repair to the company or to an authorized workshop in the appropriate way and means of transport.

WARRANTY EXEMPTIONS AND RESTRICTIONS:

Spare parts that wear out naturally as a consequence of being used (brushes, cables, switches, chargers, chokes etc.).
Tools damaged as a result of non-compliance with the instrucons of the manufacturer.
Tools poorly maintained.
Use of improper lubricants or accessories.
Tools given to third enes free of charge.
Damage due to an electrical connecon at a voltage other than that indicated on the appliance plate.
Connecon to a non-earthed power supply.
Change in current voltage.
Damage resulng from the use of salty water (e.g., washing machines, pumps).
Damage or malfuncon resulng from improper cleaning procedure of the tool.
Contact of the tool with chemicals, or damage as a result of moisture or corrosion.
Tools that have been modifi ed or opened by unauthorized personnel.
Tools used for rent.

The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specifi c spare part the company reserves the right to replace the tool with another corresponding model. Aer all warranty procedures have been concluded, the warranty period of the tool shall not be extended or renewed. Replacement of a spare part with repair charge is covered by a 1 year warranty of good operation, subject to compliance with the warranty terms. The spare parts or tools that are replaced remain in the possession of our company. Requirements, other than those menoned in this warranty form, regarding power tools repair or damage thereof, do not apply. Greek law and relave regulaons apply to this warranty.

WARRANTY

This appliance is a quality product. It was designed in compliance with current technical standards and made carefully using normal, good quality materials. The warranty period is 24 months for non-professional use and 12 months for professional use and commences on the date of purchase, which can be verifi ed by the receipt, invoice or delivery note. During this warranty period all funconal errors, which, despite the careful treatment described in our operang manual, are verifi ably due to material fl aws, will be recfi ed by our aer-sales service staff . The warranty takes the form that defecve parts will be repaired or replaced with perfect parts free of charge at our discreon. Replaced parts will become our property. Repair work or the replacement of individual parts will not extend the warranty period not will it result in a new warranty period being commenced for the appliance. No separate warranty period will commence for spare parts that may be ted. We cannot off er a warranty for damage and defects on appliances or their parts caused by the use of excessive force, improper treatment and servicing. This also applies for failures to comply with the operang manual and the installaon or spare and accessory parts that are not included in our range of products. In the event of interference with of modifi caons to the appliance by unauthorized persons, the warranty will be rendered void. Damages that are aributable to improper handling, over loading, or natural wear and tear are excluded from the guarantee. Damages caused by the manufacturer or by a material defect will be corrected at no charge by repair or by providing spare parts. The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee. For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing. Please send us the appliances post-paid or request a Freeway scker. Unfortunately we will be unable to accept appliances that are not postpaid. The warranty does not cover parts that are subject to natural wear and tear. If you wish to make a warranty claim, report faults or order spare parts or accessories, please contact the aer-sales center: Subject to change without prior noce.

Nikolaou Logo