D06-096V04 Pressure Mounted Safety Gate

Product Information

Specifications

• Model: IN231000331V01_US_UK_IT
• Extension Lengths: 7cm(2.75in), 14cm(5.51in)
• Adjustable Width: 29 – 39 inches
• Height without Extension: 74 – 79cm (29 – 31 inches)
• Height with 7cm Extension: 81 – 86cm (31.5 – 33.5 inches)
• Height with 14cm Extension: 88 – 93cm (34.5 – 36.5 inches)

Product Usage Instructions

Installing Your Gate

1. Locate the (4) threaded spindle rods and rotate the
adjustment wheels to eliminate gaps between the wheel and rubber
foot.

2. Insert the threaded spindle rods with adjustment wheels into
the holes on all four corners of the gate.

3. Place the gate in the desired opening with proper clearance
at the bottom.

4. Trace the spindle rods’ rubber feet onto the opening surface,
ensure they are level, then attach wall cups using screws or
stickers provided.

Operating the Door Latch

To Open:

– Ensure base locks are in horizontal position.

– Pull the spring lock away from the latch while lifting the
lock lever upwards to release the gate.

To Close:

– Pull the door shut, ensure top latch closes, and place the
bottom lock down.

Auto Close Lock

When opened, the gate can automatically close and lock. Gate
remains open if width exceeds 23 inches.

Use at the Top of Stairs

If used at stairs, maintain a safe distance of at least 16
inches to the first step.

Adding a Gate Extension

1. Remove top and bottom threaded spindle rods.

2. Assemble gate and extension as illustrated, preferably on the
hinge side.

Removing Your Gate from the Wall

To remove, rotate adjustment wheels on each spindle rod to
release pressure, then gently pull or push the gate free.

FAQ

Q: Can this gate be used without extensions?

A: Yes, the gate can be used without extensions within the
specified width range.

Q: Is this gate suitable for outdoor use?

A: This gate is designed for indoor use only.

IN231000331V01_US_UK_IT
D06-096V04
EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY. FR_IMPORTANT:A LIRE ATTENTIVEMENT ET À CONSERVER POUR CONSULTATION
ULTÉRIEURE. ES_IMPORTANTE, LEA Y GUARDE PARA FUTURAS REFERENCIAS. PT_IMPORTANTE, RETER PARA REFERÊNCIA FUTURA: LEIA ATENTAMENTE. DEWICHTIG! SORGFÄLTIG LESEN UND FÜR SPÄTER NACHSCHLAGEN AUFBEWAHREN. IT IMPORTANTE! CONSERVARE IL PRESENTE MANUALE PER FUTURO RIFERIMENTO E
LEGGERLO ATTENTAMENTE.

BEFORE USING PRODUCT
IMPORTANT
· Improper installation could result in the gate becoming unstable or dislodged from the doorway. · Base locks are to be used at all times, on both sides of the gate. · This product will not necessarily prevent all accidents. · Check the gate regularly to see if all the hardware and mountings are tightened. · Do not use if any components are missing or damaged. · STOP using when a pet can climb over or dislodge the gate. · Additional or replacement parts should only be obtained from the manufacturer or distributor.
WARNING
Children have died or been seriously injured when gates are not securely installed. · ALWAYS install and use gates as directed using all required parts. · YOU must install wall cups to keep gate in place.Without wall cups, child can push out and escape. · STOP using when a child can climb over or dislodge the gate. · USE only with the locking mechanism securely engaged. · NEVER use to keep child away from pool.
· NEVER leave child unattended. · Intended for use with children between 6 and 24 months. · Install according to manufacturer’ s instructions.
2

D06-096V04

7cm(2.75in) Extension

14cm(5.51in) Extension

29 – 39inch

No Extension 74 – 79cm
29 – 31 inch

With 7cm(2.75in) 81 – 86cm
31.5 – 33.5 inch

With 14cm(5.51in) 88 – 93cm
34.5 – 36.5 inch

INSTALLING YOUR GATE

Figure 1-1

Locate the (4) threaded spindle rods (B). Rotate the adjustment wheels along the threading, eliminating the gap between the adjustment wheel and the rubber foot (Figure 1-1).

Figure 1-2 Figure 1-3

NOTE You may notice a slight gap between the gate door latch and the frame (Figure 1-2). THIS IS NOT A DEFECT this gate is a pressure mounted gate and this gap will disappear once you tighten the gate in its opening.

DO NOT REMOVE THE ZIP TIE UNTIL INSTALLATION IS COMPLETE. (Figure 1-3)

4

Figure 2-1

Figure 2-2

Insert the threaded spindle rods with adjustment wheels into the hole on all four corners of the sides of the gate. (Figure 2-1)

1/8 inch
Figure 2-3

Place the gate in desired opening with –
tance between the bottom of the gate
inch(Figure 2-2).

Figure 2-4
15/64inch 6mm
Figure 2-5

ment of your gate trace the spindle rods rubber feet onto the surface of your opening making sure these are level (Figure 2-3). Then remove the gate from the opening. Then screw the 4 wall cups to the wall using the screws (Figure 2-4), or paste the 4 wall cups using the stickers provided (Figure 2-5).

5

Figure 3-1
Figure 3-2
Spanner Figure 3-3
Spanner
Figure 3-4 2.5 inch
Figure 3-5

Insert all 4 threaded spindle rods into the wall cups (Figure 3-1). Tighten the wheels using the spanner tool. (Figure 3-2 and Figure 3-3) Do not over tighten. It may be necessary to hold the threaded spindle rods while rotating the adjustment wheels to ensure that the entire unit does not rotate while installing the gate. NOTE if your door latch is not properly engaging with the receiving component, ensure that your gate is level, mounted properly and that you have not over-tightened the adjustment wheels. NOTE The gap between the gate and the wall should not exceed more than 2.5 inch on either side (Figure 3-4 and 3-5) If the gate has been installed properly the gap between the door latch and frame should now be closed (Figure 3-6)

2.5 inch

Figure 3-6 3/64 inch

6

OPERATING THE DOOR LATCH

Figure 4-1 Figure 4-2

To Open – Ensure that the base locks at the bottom of the gate door are in the horizontal position (Figure 4-1). Pull the spring lock away from the easy open latch while simultaneously lifting the lock lever upwards (Figure 4-2 and 4-3). This will release the locking latch from the gate frame and allow the door to push or pull open.

Figure 4-3 Figure 4-4

To Close – Pull the door shut and ensure that the door latch on top closes and then place the lock at the bottom of the gate down on the side occupied by the child, Gate will swing both ways unless one of the swing stops is down. Gate will not swing at all if both swing stops are down.(Figure 4-4)

7

AUTO CLOSE LOCK

Figure 5-1 8 inch

Once the gate is opened,it can close up automatically and lock up.

When the opening width of the gate is 8 inch, the gate has the function of Figure 5-2 Automatic Closing (Figure 5-1).

23 inch

NOTE When the gate opening width is greater than 23 inch, the gate will be normally open.(Figure 5-2)

USE AT THE TOP OF STAIRS

Figure A

If the gate is used at the top of stairs, we recommend the safe distanced to the 1st step is at least 16 inch. (Figure A)

16 inch

doorway or opening.

8

ADDING A GATE EXTENSION

Figure 6-1

Remove the top and bottom threaded spindle rods.(Figure 6-1)

Figure 6-2 Figure 6-3

Assemble the gate and extension as illustrated (Figure 6-2 and 6-3).
–
instructions.
NOTE: It is preferable to install any extensions on the hinge side of the gate.

9

REMOVING YOUR GATE FROM THE WALL
To remove your gate from the wall, rotate the adjustment wheels on each of the (4) threaded spindle rods to depressurize the gate from its doorway or opening. Then, gently pull or push the gate free from its doorway or opening.
CARE AND MAINTENANCE
Periodically check the gate for signs of damage, wear, or missing components. Do not use if any part is missing, worn or damaged. Check the gate regularly to ensure all the hardware and mountings are tightened. Do not use abrasive cleaners or bleach. Clean by sponging with warm water and a mild detergent.
10

11

D06-096V04

7cm(2.75pollici) Estexo

14cm(5.51pollici) Estexo

29 – 39pollici

No Extension 74 – 79cm
29 – 31pollici

With 7cm(2.75pollici) 81 – 86cm
31.5 – 33.5pollici
12

With 14cm(5.51pollici) 88 – 93cm
34.5 – 36.5pollici

13

15/64pollici 6mm
14

15

16

17

18

19

20

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>