FPG I-GG-HH-12-13-A003 Isoform Grab And Go Food Cabinet Owner’s Manual
- June 15, 2024
- FPG
Table of Contents
I-GG-HH-12-14-A003 Isoform Grab And Go Food Counter
GRAB &GO 1200/1350
HEATED/HEATED
| RANGE | ISOFORM GRAB&GO |
|---|---|
| TEMP. TOP | HEATED/TILT FRONT |
| TEMP. BOTTOM | HEATED/OPEN FRONT |
| MODEL | I-GG-HH-12-14-A003 |
| INSTALLATION | FREESTANDING |
| HEIGHT | 1454mm |
| WIDTH | 1208mm |
| DEPTH BASE | 915mm |
| TEMPERATURE RANGE | +65°C – +80°C |
| RECOMMENDED CORE PRODUCT TEMPERATURE | +65°C – +80°C |
| ENVIRONMENTAL TEST CONDITIONS | 22˚C / 65% RH |
Showing : Isoform Grab&Go 1208mm width x 1454mm height
Top Display: Heated, tilt front. Bottom Display: Heated, open front with
IWave shelf
FEATURES
Highenergyefficiency: 2.19 kWh per hour (average)
Cabinetoperatingtemperaturerange+65°C-+80°C
Recommended core product temperature +65°C – +80°C
- Sleek black cabinet frame with silver pinstripe (default) on front, rear and doors and grille to front panel
25,000 hour LED lighting system (colour: natural) at 2758 lumens per metre in both top and bottom displays
Tilt Front Heated Top Display
Engineered with energy-efficient, fan assisted Thermofin heating technology to provide fast heat-up time and gentle heating for extended product shelf life
- Tilt front glass provides easy access for cleaning
Open Front Heated Bottom Display
Fixed IWave shelf is brushed stainless steel and is fitted with ticket strips
front and rear: 30mm (height) with caution decal applied. Shelf is supplied
with 3 x 375mm removable aluminium drip trays, powdercoated black (default)
FPG IWave heating technology uses low-wattage quartz infrared elements
complemented with a heating coil in the base for even temperature distribution
and extended shelf life
Safer for consumers – display surfaces are maintained < +65°C
Operational Excellence
Dual Action Doors (staff side) – doors both slide and swing for full-width
access to the cabinet
Constructed from stainless and mild steel with fully double-glazed, toughened
safety glass for maximum energy efficiency, climate control and durability
Fitted with an electronic controller for energy efficiency
- Fitted with unidirectional rollers and adjustable stabilisers
OPTIONS & ACCESSORIES
Contact a FPG Sales Representative for our full range, including:
- Flat front panel to base
- Pinstripe colour
- Stainless steel product trays with three sides
- Stainless steel pie chutes
- Branded decals
- Rear door or end glass mirror application
- LED lighting colour: Warm white
- Lockable castors
Top Display
- Additional shelf
- Shelf trays: Toughened safety glass or brushed stainless steel. Colour and woodprint options available for steel shelf trays
Bottom Display
- Drip trays: Colour and woodprint options available
- Angled base insert
HEATED DATA
| TEMPERATURE RANGE| RECOMMENDED CORE PRODUCT TEMPERATURE| ENVIRONMENTAL TEST
CONDITIONS| HEATING
---|---|---|---|---
TOP DISPLAY| +65˚C – +80˚C| +65˚C – +80˚C| 22˚C / 65% RH| Fan assisted
Thermofin
BOTTOM DISPLAY| IWave low-wattage infrared quartz elements
ELECTRICAL DATA
MODEL| VOLTAGE| PHASE| CURRENT| E24H (kWh)| kWh per hour (average)| IP RATING|
MAINS| LED LIGHTING
---|---|---|---|---|---|---|---|---
CONNECTION| CONNECTION PLUG1| HOURS| LUMENS| COLOUR
I-GG-HH-12-14-A003| 220-240 V| Single| 14.3 A| 52.56| 2.19| IP 22| 3 metre 3
core cable| 15 amp 3 pin plug| 25,000| 2758 per metre| Natural
1 Please advise country to change plug specification.
CAPACITY, ACCESS & CONSTRUCTION
| DISPLAY AREA| LEVELS| ACCESS FRONT| ACCESS REAR| REAR DOORS| CHASSIS
CONSTRUCTION
---|---|---|---|---|---|---
TOP DISPLAY| 0.50 m2| Base only| Tilt front| Dual Action doors| 2| Stainless
304 and mild steel
BOTTOM DISPLAY| 1.10 m2| 1 Shelf + Base| Open front| Dual Action doors| 2
DIMENSIONS
| MODEL | H x W x D mm (Uncrated) | MASS (Uncrated) |
|---|---|---|
| I-GG-HH-12-14-A003 | 1454 x 1208 x 915 | – kg |
Crated weights and dimensions vary. Please contact us for information on your
shipment.
Installation note; Designed to be installed as a stand alone unit.
Model cutout dimensions: I-GG-HH-12-14 models require 1218 x 920mm
benchtop cutout. Joinery height 407mm (see product manual for installation
guide).
More information including technical data and installation guidelines is
available from the Product Manual published on our website.
In line with our policy to continually develop, improve and support our
products, Future Products Group Ltd reserves the right to change
specifications and design without notice.
Have a question? Please email us at
sales@fpgworld.com or visit
www.fpgworld.com for full contact details for your
region.
11/23 © 2023 Future Products Group Limited
FPGWORLD.COM
Worldwide contact details: https://fpgworld.com/FPG-Global-Locations-Contact
Please contact FPG to discuss your requirements for meeting country-specific
standards.
References
- FPG Global Locations & Contact | FPG - Food Display Cabinets - Retail Solutions - FPG
- FPG Global Locations & Contact | FPG - Food Display Cabinets - Retail Solutions - FPG
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>