V I V O MOUNT-KB10C Clamp-on Keyboard Tray for Corner Desk Instruction Manual

June 13, 2024
V I V O

V I V O MOUNT-KB10C Clamp-on Keyboard Tray for Corner
DeskClamp-on Keyboard Tray for Corner Desk
Instruction Manual

MOUNT-KB10C Clamp-on Keyboard Tray for Corner Desk

SKU: MOUNT-KB10C
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.V I V O MOUNT-KB10C Clamp-on
Keyboard Tray for Corner Desk - qr codehttps://vivo-us.com/products/mount-kb10c
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

V I V O MOUNT-KB10C Clamp-on Keyboard Tray for Corner Desk - PACKAGE
CONTENTS TOOLS NEEDED NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1
Attach Sliding Rails (B) to Keyboard tray (A) using M5x12mm Screws (S-C) and a Phillips screwdriver.
Attach Baffle (C), and Supporting Plates (D) to Keyboard Tray (A) using M5x12mm Flathead Screws (S-A) and a Phillips screwdriver.V I V O MOUNT-KB10C
Clamp-on Keyboard Tray for Corner Desk - ASSEMBLY 1 STEP 2
Install Clamp Pads (F) to Clamps (E), then attach Clamps (E) to Sliding Rails (B) using M4x7mm. Screws (S-B) and a Phillips screwdriver.
V I V O MOUNT-KB10C Clamp-on Keyboard Tray for Corner Desk - ASSEMBLY
2 STEP 3
Use Wrench (T-A) to adjust Clamps (E) to the desired angle. Place keyboard tray in desired location so that Clamp faces are flush with the desktop and tighten clamps.V I V O MOUNT-KB10C Clamp-on Keyboard Tray for Corner Desk -
ASSEMBLY 3

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 08/07/2023
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:
www.vivo-us.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

V I V O User Manuals

Related Manuals