NOREGON 3.0 USB Translator User Guide

USB TRANSLATOR 3.0
QUICKSTART GUIDE

3.0 USB Translator

| | *Ensure that the USB cable is firmly seated into the adapter’s USB port
---|---|---

NOTE:
Adapter is powered by the vehicle and must be connected to operate.

INSTALL DRIVERS:

1. Close running applications.
2. Users can download adapter drivers online by visiting www.noregon.com/adapter-drivers and clicking the “Assets and Driver Download” button from the “USB Translator 3.0” section of the adapter driver landing page.
3. Once the download is complete, launch the installer and follow the prompts.

CONNECT:

4. Connect the D89 end of the USB cable to the port labeled Computer on the USB Translator 3.0 Adapter.
5. Plug the other end of the USB cable into the USB port on the PC.
6. Connect the diagnostic cable to the 26-pin connector on the USB Translator 3.0 Adapter.
7. Attach the diagnostic cable’s connector to the diagnostic port on the vehicle.

To order additional cables or
replacement parts, visit:
allisonstore.noregon.com
QSG-USBT3.0-2023-03-081423

Documents / Resources

| NOREGON 3.0 USB Translator [pdf] User Guide
3.0 USB Translator, 3.0, USB Translator, Translator
---|---

References

• Allison Transmission
• Adapter Drivers - Noregon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>