NOREGON DLA Plus 2.0 Vehicle Interface Adapter Kit User Guide

NOREGON DLA Plus 2.0 Vehicle Interface Adapter Kit

NOTE:
Adapter is powered by the vehicle and must be connected to operate.

INSTALL DRIVERS

1. Close running applications.
2. Users can download adapter drivers online by visiting www.noregon.com/adapter-drivers and clicking the “Instructions and Driver Download” button from the DLA+ 2.0 Wired Adapter section of the adapter driver landing page.
3. Once the download is complete, launch the installer and follow the prompts.

CONNECT

1. Plug the USB cable into the USB port on the PC.
2. Connect the other end of the USB cable to the port labeled Computer on the DLA+ 2.0 Wired Adapter. Connect the diagnostic cable to the 26-pin connector on the DLA+ 2.0 Wired Adapter.
3. Attach the diagnostic cable’s connector to the diagnostic port on the vehicle.

QUESTIONS?
Call : 855-889-5776
For driver updates & more, visit: WWW.NOREGON.COM
QSG-DLA2.0-09-081822

References

• Maintenance Solutions for Commercial Vehicles | Noregon
• Adapter Drivers - Noregon

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>