NOREGON 122051 DLA+ Vehicle Adapter Kit User Guide

June 12, 2024
NOREGON

NOREGON 122051 DLA+ Vehicle Adapter Kit

Product Information

The DLA+ 3.0 Vehicle Interface is an adapter that allows for vehicle diagnostics and communication with a PC. It requires a connection to the vehicle and the PC in order to operate. The adapter is powered by the vehicle.

Product Usage Instructions

  1. Before starting, close any running applications on your PC.
  2. Download the adapter drivers from the website www.noregon.com/adapter-drivers. Click on the “Instructions and Driver Download” button in the DLA+ 3.0 – Adapter section of the adapter driver landing page.
  3. Once the download is complete, launch the installer and follow the prompts to install the drivers.
  4. Connect the D89 end of the USB cable to the port labeled “Computer” on the DLA+ 3.0 USB Adapter.
  5. Plug the other end of the USB cable into the USB port on your PC.
  6. Connect the diagnostic cable to the 26-pin connector on the DLA+ 3.0 USB Adapter.
  7. Attach the diagnostic cable’s connector to the diagnostic port on your vehicle.
  8. Ensure that the USB cable is firmly seated into the adapter’s USB port.

If you have any questions or need further assistance, you can call 855-889-5776. For driver updates and more information, visit www.noregon.com.

INSTALLATION INSTRUCTION

NOTE:

  • An adapter is powered by the vehicle and must be connected to operate.
  • Ensure that the USB cable is firmly seated into the adapter’s USB port

INSTALL DRIVERS

  1. Close running applications.
  2. Users can download adapter drivers online by visiting www.noregon.com/adapter-drivers and clicking the Instructions and Driver Download” button from the DLA+ 3.0 – Adapter section of the adapter driver landing page.
  3. Once the download is complete, launch the installer and follow the prompts.
    • CONNECT:
  4. Connect the D89 end of the USB cable to the port labeled Computer on the DLA+ 3.0 USB Adapter.
  5. Plug the other end of the USB cable into the USB port on the PC.
  6. Connect the diagnostic cable to the 26-pin connector on the DLA+ 3.0 USB Adapter.
  7. Attach the diagnostic cable’s connector to the diagnostic port on the vehicle.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals