CLAS OP 4506 Pneumatic Brake Caliper Rewind Set Instruction Manual

CLAS OP 4506 Pneumatic Brake Caliper Rewind Set

Product Information:

Product Usage Instructions

1. Ensure you have contacted the manufacturer’s customer support for any product-related issues before returning the product.
2. If you have changed your mind about the purchase, return the product before attempting installation.
3. The product includes a pneumatic gun with an aluminum body, a power button, and a rotating handle.
4. Connect the workshop air intake fitting to a suitable air supply.
5. Select the appropriate adapter from the provided set based on your requirements.
6. Attach the selected adapter to the pneumatic gun.
7. Hold the brake caliper in place and position the pneumatic gun’s drive shaft against the piston.
8. Press the power button to activate the pneumatic gun and allow it to rotate the piston back into the caliper.
9. Release the pressure by pressing the pressure release button to remove the pneumatic tool from the brake caliper.
10. Refer to Fig. 1, Fig. 2, and Fig. 3 in the user manual for visual guidance.

If you need any components or parts, please contact the reseller. In case of any problems, please contact your authorized technician.

OP 4506

KIT REPOUSSE PISTONS PNEUMATIQUE (22PCS)
PNEUMATIC BRAKE CALIPER REWIND SET (22PCS)

WARNING
Before returning this product for any reason (installation problem, instructions for use, breakdown, manufacturing problem…), please contact us.

Contact :
You can reach us by mail sav@clas.com or by phone +33(0)4 79 72 69 18 or go directly to our website clas.com
If you have changed your mind regarding your purchase, please return this product before you attempt to install it.

FEATURES

• • Designed to speed up disc brake maintenance and save energy
  • The tool can be turned both left and right – suitable for normal and reverse threaded pistons.
  • Pneumatic tool allows pistons to be reassembled at the touch of a button.
  • Includes 21 adapters, suitable for a wide range of vehicles

SPECIFICATIONS

PNEUMATIC GUN

NOTE
The vibration emission test refers to ISOEN ISO 20643:2008/A1:2012.
Portable engine-powered machines – Test methods for the assessment of vibration emissionThe noise test refers to BS EN ISO 15744:2008 Portable non- electric power tools
Noise measurement code – Engineering method (grade 2) (ISO 15744:2002)

ADAPTERS

OPERATING INSTRUCTIONS

• Always read the instructions carefully before using the tool.
• Ensure that the work area is adequately lit.
• Keep children and unauthorized persons away from the work area.
• Keep the work area clean and tidy, dry and free of extraneous materials.
• DO NOT allow untrained persons to use this tool kit.
• Always wear eye protection complying with OSHA and ANSI Z87.1 standards.
• Always wear gloves when working with the tool.
• Always wear hearing protection.
• Disposal: Customers must follow local regulations for handling used/destroyed parts.

1. Select a suitably sized, pinned adapter (Fig. 1).
2. Connect the adapter to the magnetic pins on the pneumatic tool nozzle.
3. Connect the pneumatic tool to the workshop air supply.
4. Press pressure release button and turn rotary lever to set length.
5. Fit pneumatic tool to brake caliper.
6. Press the feed button to secure the tool to the brake caliper (Fig. 2 and 3).
7. Make sure the tool is securely installed on the brake caliper.
8. Continuously press the power button and turn the rotating lever to wind up the brake piston. Once the piston is in the correct position, press the pressure release button to remove the pneumatic tool from the brake caliper.

APPLICATIONS

DECLARATION DE CONFORMITE CE
EC DECLARATION OF CONFIRMITV
Nous, We,

CLAS EQUIPEMENTS
Z. A. de la Crouza
73800 Chignin -France

DECLARONS
Sous notre responsabilite que le produit :

DECLARE THAT,
Under our responsibility, the following products:

Modele / Model : KIT REPOUSSE PISTONS PNEUMATIQUE {22PCS) / PNEUMATIC
BRAKE CALIPER REWIND SET (22PCS)
Type : OP 4506
Est fabrique en conformite a la directive machine 2006/42/CE suivant les normes:
Is manufactured in conformity with the machinery directive 2006/42/EC following standards:

• EN ISO 12100:2010
• EN ISO 11148-1:2011

Chignin le 05.09.2023
Benoit DUPUIS, responsable tecnique

CLAS EQUIPEMENTS – SAS au capital de 130 000€, R.C.S Chambery: 409 786 944, N ° TVA lntracommunautaire FR 13 409 786 944
Siege social, Z.A de la Crouza – 73800 CHIGNIN – FRANCE ?+33 (0)4 79 72 62 22 – -,,. +33 (0)4 79 72 52 86
contact<! – www.clas.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>