LAMAX LXCPS1PSWA Clips1 Plus Wireless Earbuds User Guide
- June 13, 2024
- LAMAX
Table of Contents
User Guide
Clips1 Plus
DESCRIPTION
- Notification LED
- Multifunction button
- Microphone
- Charging station button
CONTROLS
| Switch on | Hold the multi-function button for 5 seconds |
|---|---|
| Switch off | Hold the multi-function button for 5 seconds |
| Play / Pause | Tap the multi-function button |
| Volume up | Double tap the multi-function button on the right handset |
| Volume down | Double tap the multi-function button on the left handset |
| Next track | Hold down the multi-function button on the right handset for 2 |
seconds
Previous track| Hold down the multi-function button on the left handset for 2
seconds
Answer call| Tap the multi-function button
End call| Hold the multi-function button for 1 second
Reject a call| Hold the multi-function button for 2 seconds
ANC ON / ANC OFF / Transparency modes| Triple tap on the right earpiece
multifunction button
Music/game mode| Triple tap on the left earpiece multifunction button
To activate the mobile assistant| Four taps on the multi-function button on
the left handset
SWITCHING ON
The headphones automatically switch on when removed from the charging station.
To switch on manually, hold the multi-function button for 5 seconds. An
audible notification will sound when switched on.
SWITCHING OFF
The headphones automatically switch off when inserted into the charging
station. To switch off manually, hold the multi-function button for 5 seconds.
An audible notification will sound when switching off.
PAIRING
- Remove the headphones from the charging station. The headphones will automatically connect to each other. One headset will be the master and ready for pairing, this is indicated by a white flash. Another headset will glow white.
- Switch on Bluetooth on your device and search for LAMAX Clips1 Plus in the list of available Bluetooth devices. After successful pairing, an audio notification will sound. The LEDs in both headphones will turn off.
If you have problems pairing, remove the headphones from the list of paired devices on your phone. Insert the headphones into the charging station and hold the charging station button for 10 seconds. The LEDs on both headphones will flash red five times. Then pair them as described in step 1.
ANC AND TRANSPARENCY MODE
Mode order:
- ANC on – switching on active ambient noise cancellation
- ANC off – switching off active ambient noise cancellation. Standard mode
- Transparency mode – amplification of ambient sounds thanks to microphones in theheadphones
CHARGING
To charge the charging station, plug the cable into the USB-C port on the back
of the charging station and plug the other end of the cable into a USB power
supply with a maximum input voltage of 5V and a current of 2A. The light glows
red when the charging station is charging. When fully charged, it will glow
white.
Before using for the first time, be sure to remove the transparent protection
film on the charging pins from the inside of both headphones.
To charge the headphones, insert them into the charged charging station. When
charging, the LED in the headphones lights red. When fully charged, the LEDs
will glow white for 30 seconds, then turn off.
PARAMETERS
| Wireless technology | Bluetooth 5.3 |
|---|---|
| Maximum pairing distance | up to 15 meters |
| Supported codecs | AAC, SBC |
| Battery capacity in the handset | 45 mAh |
| Charging station battery capacity | 380 mAh |
| Playback time | up to 8 hours on a single charge |
| Charging time of headphones | 2 hours |
| Charging time of the charging station | 2 hours |
| Weight of one handset | 4 g |
| Weight with charging station | 44 g |
Printing errors reserved.
Download the current version of the user manual here:
https://lamax-electronics.com/clips1-plus/manual
https://lamax-electronics.com/clips1-plus/manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>