OUKITEL 84008119 WP21 Mobile Phone User Guide

: June 13, 2024
: OUKITEL

Table of Contents

OUKITEL 84008119 WP21 Mobile Phone
Product Information
Product Usage Instructions
Safety use
Safety Precautions
WARRANTY CARD
WARRANTY CARD
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OUKITEL 84008119 WP21 Mobile Phone

OUKITEL-84008119 -WP21-Mobile-Phone-product

Product Information

The WP21 is a mobile phone manufactured by Shenzhen Yunji Inteligent Technology CO.,LTD. It has an increased resistance and features a display made of tempered glass for higher resistance against scratches. The phone is not mechanically undestroyable, and the display may crack when dropped on a hard surface or sharp object. The device is IP68 rated for water and dust resistance.

Product Usage Instructions

Installation of NANO SIM and microSD cards:
Before installing cards, make sure to turn off your phone.

Carefully pull out the SIM or microSD card slot from the side of the phone using the SIM card eject clip.
Then carefully pull it out of the buckle.
Insert the cards into the slots until they click into place.
Put the slot back into the phone.
It is possible to use 2x NANO SIM and 1x microSD card.

Charging the battery:
Before putting your phone into service, it is recommended to fully recharge its battery.

Connect the adapter to the charger. Make sure to plug the USB-C connector from the correct side, without using violence.
Connect the charger to the wall outlet.
If the battery is fully charged, disconnect the phone from the charger.

Please note that individual parameters, description by figures, and design in the manual may differ depending on the version and updates of the device. It is recommended to update your device as soon as a new version of software is available. The warranty sheet and the user manual are included in the phone package.

User manual
Individual parameters, description by figures and design in the manual may differ depending on the version and updates. Printing errors reserved.

Update your device as soon as a new version of software is available

The warranty sheet and the user manual are included in the phone package.
Update your device as soon as a new version of software is available.
The buyer is obliged to provide a serial number on the warranty card as well as in the delivery note and the proof of purchase. In this context, the buyer acknowledges that unless the serial number of goods is not marked on the proof of purchase, delivery note and in the warranty card and therefore it cannot be possible to compare this serial number marked on goods and its protective packaging with the serial number stated in the warranty card, delivery note and the proof of purchase and thus to verify that the goods runs from the seller, the service center is competent to claim such a goods automatically and reject it immediately. The buyer must instruct all persons to whom the goods would be subsequently sold. Product complaints do with your dealer.

Safety use

WP21 has an increased resistance. However, it is not mechanically undestroyable.
The display is made of tempered glass, which ensures higher resistence against scratches. When dropped on a hard surface or sharp object, it may crack. The display cracked due to mechanical damage or improper misuse of the device is not covered by warranty.
The WP21 has the IP68 certification under ISO 20653:2013 standard. (According to producer 1,5 m depth for 30 minutes, IP68 resistance does not apply to salt water.)
The IP68 protection does not guarantee 100% resistance to water in all conditions.
We also recommend to not to charge the phone and dry the phone´s connector after contact with water or other liquid with the adequately warm air flow (up to 40°C).
Always keep the input of the charging jack tightly closed with cap when not charging the phone. The warranty is not applied to an intentional damage to the phone.
Warning – the microphone is located on the bottom of the phone, when overlapped (eg with your hand), the other side will not hear or will hear very poorly.

Installation of NANO SIM and microSD cards
Turn off your phone before installing cards.

Carefully pull out the SIM or microSD card slot from the side of the phone using the SIM card eject clip. Then carefully pull it out of the buckle.
Insert the cards into the slots until they click into its place, and put the slot back into the phone.
It is possible to use 2x NANO SIM and 1x microSD card.

Charging the battery:
Before putting your phone into service you must recharge its battery for 100%.

Connect the adapter to the charger. Please do not use violence, when plugging the connector. Keep plugging the USB-C connector from the correct side.
Connect the charger to the wall outlet.
If the battery is fully charged, disconnect the phone from the charger.

Switching the phone on / off / sleep mode

Make sure that the phone has a SIM card and the battery is fully charged.
Press and hold the ON/OFF button to switch on the phone.
Switch off the phone by pressing and holding ON/OFF button and select Power off, later OK.
Press shortly ON/OFF button to switch the phone over to the sleep mode.

Safety Precautions

Do not use your phone while driving
Do not use your phone at the petrol stations.
Hold the phone at least 15 mm from your ear and body.
The phone produces a bright or flashing light.
The small parts of the phone can cause suffocation.
Do not expose your phone to open fire.
The phone can produce a loud sound.
The phone is not resistant to fillings.
Avoid exposure to magnetic fields.
Keep the phone away from medical devices.
On request, turn off your phone in hospitals and other medical facilities.
Keep the phone dry.
On request, turn off the phone at airports and on planes.
Do not dismantle the phone.
Turn off the phone in the vicinity of explosive materials and chemicals.
Use the phone only with certified equipment.
Do not reckon only upon your phone during emergency situations.
The phone contains a label that detects moisture. In case of moisture inside phone this label becomes red. The manufacturer has the right to reject a warranty with such a damaged phone.

Damages requiring professional repair:

If such cases may occur, please, contact the authorized service or your distributor:
Moisture got into the phone.
The phone is mechanically damaged.

The phone is extremely overheated.

For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents means that used electrical and electronic products should not disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.
Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer. Follow the rules for working with electrical equipment. The user may not dismantle the device or replace any part of this. There is a warranty seal inside the phone to verify that the phone does not carry signs of improper intrusion. Opening or removing the covers poses the risk of electric shock. In case of incorrect reassembly and subsequent connection you are also exposed to electric shock.

Declaration of Conformity:

Company INTELEK.CZ s.r.o. hereby declares that all WP21 devices are in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available on this website www.intelek.cz or www.oukitel.eu
The warranty period of the product is 24 months, unless stated otherwise.

This device can be used in the following countries: $OUKITEL-84008119 -WP21 -Mobile-Phone-fig- $1$$

Restrictions on WiFi use

Italy – The conditions for using the WiFi network are described in the so-called Electronic Communications Code
Norway – The 2.4 GHz limitation applies only to the area 20 km from colony of Ny-Ålesund.
RoHS : The components used in the device meet the requirements on the restriction of hazardous substances in electrical and electronic devices in accordance with Directive 2011/65/EU. The RoHS declaration can be downloaded from www.intelek.cz or www.oukitel.eu

Operation of radio equipment:

CZ: This radio equipment can be operated in the Czech Republic under the General Authorizations VO-R / 1 / 05.2017-2 and VO-R / 12 / 09.2010-12.
SK: This radio equipment can be operated under General Authorizations VPR – 07/2014, VPR – 02/2017 and VPR – 35/2012.

Maximum EIRP:

Max. 2 W

Frequency range:

GSM: 2100/1900/850/900 MHz
WCDMA: 2100/1900/850/900 MHz
LTE: 2100/1800/2600/900/800 MHz
2.4G WiFi (20 MHz): 2412 – 2472 MHz
2.4G WiFi (40 MHz): 2422 – 2462 MHz
5G WiFi: (20 MHz) 5180 – 5320 MHz
5G WiFi: (40 MHz) 5190 – 5310 MHz
5G WiFi: (80 MHz) 5210 – 5290 MHz

Google, Android and Google Chrome are trademark Google LLC.

Manufacturer:
Shenzhen Yunji Inteligent Technology CO.,LTD A-Side A2 Building 2/F Enet New Industrial park, No. 20 Dafu Industrial Zone, Aobei Community, Guanlan, Longhua New District, Shenzhen China

Exclusive importer of Oukitel products to EU:

Headquarter: INTELEK.CZ s r.o., Olivova 2096/4, Nové Město (Praha 1), 110 00 Praha, CZ
Branch : INTELEK.CZ s r.o., Ericha Roučky 1291/4, 627 00 Brno, CZ
WEB : http://www.oukitel.eu
SUPPORT : http://www.oukitel.eu/helpdesk
Copyright © 2023 INTELEK.CZ s r.o.
All rights reserved.

WARRANTY CARD

Product:
Model:
Serial / Batch number: (S/N)
Date of sale:

Warranty until:

Sale document number:
Seal of the store:

Information for Customers about Warranty Terms and Conditions:
Warranty shall apply to defects of purchased product, found during its warranty period. When purchasing a particular product, please consider carefully what properties and functions you expect your product to have. The fact that purchased product shall not satisfy your later requirements shall not give any reason for complaint. Please, prior to the first use of this product read carefully its operating instructions and follow these instructions consistently.
We recommend you to keep original product packing during the warranty period for possible transport of the product in such a way so as to prevent any product damage during its transport and handling.
For the purpose of due application of any complaint about the product we recommend you to ask Seller to fill-in and confirm this Warranty Card including identification of serial number of purchased product, which shall comply with the serial number specified both in the document proving product purchase and delivery note and purchased product. In this connection Customer hereby takes into account that unless this Warranty Card specifies serial number of purchased product, i.e., comparison of such serial number identified in the product with the serial number identified in this Warranty Card and document of product purchase/or delivery note shall not allow to confirm that particular product has come from Seller, in case of any doubts about the origin of such particular product Seller shall be entitled to automatically and without any other acts to reject the complaint of such goods.

Warranty shall not apply to:

product damage suffered by unqualified installation of firmware or its modification;
product damage by static electricity;
product use for any other purposes than designed, described in attached operating instructions;
damage to warranty seal of the producer, attached to the product;
product damage inconsistent with the operating instructions, technical standards or safety regulations valid in the Czech Republic;
product damage resulting from normal wear and tear;
discharged batteries, decrease in battery capacity caused by its wear and tear;
product defects caused by the use in dusty, polluted or in any other way dissatisfactory environment pursuant to attached operating instructions.

WARRANTY CARD

Wear and tear of the product and its components caused by their common use (discharged batteries, decreased capacity of accumulator, wear and tear of mechanical or displaying components, wear and tear of supply cables, headphones etc.) shall be subject neither to defect warranty nor quality warranty in the moment of take-over.
Furthermore, complaints about product parameters, not included in the operating instructions or in any commercial-technical documentation of Seller, related to the product, shall not be subject to quality warranty in the moment of take-over.
Proof of product purchase, or delivery note, shall constitute an integral part of this Warranty Card.