CLAS HU 2030 Diesel Filter Wrench Instruction Manual
- June 13, 2024
- CLAS
Table of Contents
CLAS HU 2030 Diesel Filter Wrench
WARNING
Before returning this product for any reason (installation problem,
instructions for use, breakdown, manufacturing problem…), please contact us.
Contact :
You can reach us by mail sav@clas.com or by phone +33(0)4 79 72 69 18 or go
directly to our website clas.com
If you have changed your mind regarding your purchase, please return this
product before you attempt to install it.
INTRODUCTION
It is compulsory to read this instruction manual before starting any kind of
action.
The proper operation and full compliance of this product’s performance is
guaranteed only if all the instructions provided in this manual are closely
adhered to.
We guarantee that this product complies with the technical specifications
described in this manual.
The manufacturer shall not be held responsible for any improper uses other
than those described herein.
Use protective work gloves, protective footwear, hard hat and safety goggles.
Misuse:
- This product should only be used as described in this documentation; any other use is considered improper.
- The manufacturer accepts no responsibility for any damage caused by the incorrect or unreasonable use of the equipment.
- Moreover, misuse shall also void the warranty.
Take care of your tools:
- Be sure to store your tools in a clean state.
- Place the tools inside their original package.
INTENDED USE
Thanks to the wrench’s special open design, it is possible to work on the diesel filter cartridges before the filter holder is removed.
- This is particularly important and necessary for car models where the filter is installed on the front right, which is usually an area difficult to reach.
- The actuation must be carried out by means of an extension and a ratchet, where space allows it.
APPLICATION
OEM filter no .: R2N5-13-ZA5A 9A
Especially for the engine MAZDA SKYACTIVE 2.2 l Diesel
SH / Mazda 6 / CX-5 / Mazda 3 (2012 to 2017)
The diesel filter is installed on:
Mazda 3, 6, B series, BT 50, CX-5, CX-7, E series (III + IV)
In addition, the filter is also installed on models of the manufacturers Ford,
Mitsubishi, Subaru, and Toyota
TECHNICAL DATA
Dimensions Ø 84 mm x 15 flutes
Thickness 12mm
1/2″ connection
TECHNICAL DATA
Dimensions Ø 84 mm x 15 flutes
Thickness 12mm
1/2″ connection
Customer Support
CLAS Equipements
ZA de la CROUZA
73800 CHIGNIN
FRANCE
Tél. +33 (0)4 79 72 62 22
Fax. +33 (0)4 79 72 52 86
DIESEL FILTER WRENCH MAZDA/FORD/MITSUBISHI/SUBARU/TOYOTA
If you need components or parts, please contact the reseller. In case of
problems, please contact your authorized technician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>