LASER ALC-KLED LED Alarm Clock User Manual

: October 31, 2023
: Laser

Table of Contents

Thank you for your purchase!
WHAT’S IN THE BOX
SPECIFICATIONS
CONTROLS
OPERATING INSTRUCTIONS
TROUBLESHOOTING:
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LASER ALC-KLED LED Alarm Clock

Thank you for your purchase!

Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.

For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:

SCAN ME

WHAT’S IN THE BOX

Alarm Clock
User Manual

SPECIFICATIONS

Temperature Range:	0°C – 50°C or 32°F – 122°F
TimeFormat:	12 & 24HR
Screen Size:	52 x 52mm
Battery:	1.5V, 3 x AAA (not included)
Working Voltage:	4.5V
Standby Time:	90 – 150 days
Dimensions:	78 x 78 x 78mm
Weight:	88g

CONTROLS

Light|

Press to turn LED light on.
Tapping the top of the clock can also turn on the LED light.
The light will illuminate for a few seconds before turning off.

---|---
Up|

Press to increase value.
In Time view tap to switch between 12 & 24HR time.
In Alarm view tap to turn alarm and snooze on.

Down|

Press to decrease value.
In Time view tap to switch between Celsius and Fahrenheit temperature.
In Alarm view tap to turn alarm and snooze on.

Set|

In Time view tap to set time.
In Alarm view tap to set alarm.
Press to move between fields when setting time or alarm.

Alarm|

Press to increase value.
In Time view tap to switch between 12 & 24HR time.
In Alarm view tap to turn alarm and snooze on.

OPERATING INSTRUCTIONS

Setting Time & Date

Insert 3 x AAA batteries.
Ensure the unit is powered on and in normal display mode.
Press “Set” to activate setting of time and date.
Adjust the values by pressing the “Up” or “Down” button.
Press “Set” to move to the next field.
The field sequence is as follows: Hour > Minutes > Year > Month > Date > Exit.
Once finished press the “Alarm” button to exit or don’t press anything for approx. 1 minute.

Setting the Alarm

Ensure the unit is powered on and in normal display mode.
Make sure you have set the correct time.
Press the “Alarm” button to switch to alarm mode.
Press “Set” to activate setting of the alarm.
Adjust the values by pressing the “Up” or “Down” button.
Press “Set” to move to the next field.
The field sequence is as follows: Hour > Minutes > Snooze Duration > Music Type > Exit.
Once finished press the “Alarm” button to exit or don’t press anything for approx. 1 minute.
To activate the alarm, press the “UP” or “DOWN” button till you see a small “Bell” icon onscreen.
To activate snooze, press the “UP” or “DOWN” button till you see a small “Zz” icon onscreen.
Alarm will ring for 1 minute once the set time has been reached.
The snooze alarm will ring after the first alarm once the snooze duration is reached.
Press any button (except LED) during the alarm ring to turn the alarm sound off.

Note:

The snooze duration is between 1 – 60 minutes. Careful when setting the Snooze value to 60 minutes as this will not sound the snooze alarm again for 1 hour.
The snooze alarm will keep sounding after the elapsed time unless the “Zz” icon has been removed from the screen.

TROUBLESHOOTING:

No Power:

Check batteries and replace as required.

The Alarm keeps sounding:

If you have a snooze alarm set as indicated by the “Zz” icon onscreen, then the alarm will activate every interval the snooze duration has been set e.g., if your snooze duration is set as 15, then the alarm will sound every 15 minutes after the initial alarm until the “Zz” icon has been removed from the screen.
To remove the “Zz” icon press the “Up” or “Down” button when in Alarm view.