Energizer QE20008PQ Fast Charging Powerbank Instruction Manual
- June 13, 2024
- Energizer
Table of Contents
Energizer QE20008PQ Fast Charging Powerbank
Specification
Model Name : QE20008PQ
Cell Type : Lithium Polymer
Battery Capacity: 20000mAh/ 74Wh(Max.)
Rated Input : Micro USB 5V/2A
Rated Input : USB-C PD 5V/2A, 9V/2A
Rated Output 1: USB-A5V/3A, 9V/2A.12V/1.5A
Rated Output 2 : USB-C PD 5V/2A. 9V/2.22A. 12V/1.5A
Wireless Output: swn.sw/10W/15W
Total Output: 20W {Max.)
Dimensions : 148(W x70.5(W) x28.5(H)mm
Weight: 430g:1:10g
Package Contents
-
OE20008PQ
-
User Manual Cable de carga
-
Charging Cable Manual de usuario
Safety Instruction
- Avoid water, heat, fire, penetration of the battery, and severe drops at all times.
- Do not insert other objects into the USS ports other than the USS connectors.
- Once the product is fully charged, your power pack automatically shuts off to save power.
- During charge & recharge, battery may feel slightly warm.
- Do not clean the battery with water or other cleaning products, clean the exterior with a lightly wetted cloth or napkin.
- Normally the battery performance will decline after 2 years
- Any intentional and physical damage to the battery will not be under the warranty conditions.
- Battery storage temperature is between -10°C-+60°C , operating temperature is 0°C-45°C.
- Fully charge the battery before first use to maximize the battery life.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’ s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: ( 1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
How to use
*Compatible with wireless charging standard
For fast charge (via cable): connect only one device to power bank to activate
fast charge, do not press the power button
For wireless: press the power button once to activate wireless charging, fast
charge (via cable) will switch to normal charging m1ode. After 2 mins of idle,
wireless charging will shut off, fast charge will then resume
Recharge Mode
Blinking light indicates recharging.
Solid light indicates fully charged.
For fast charge, please charge only one device at a time.
Please do not charge more than 2 devices at a time.
How to recharge
Adapter NOT included
Connect the micro-USB/USB-C end to the input port to recharge