SolidHand AL01M01 Monitor and Laptop Stand User Manual
- June 1, 2024
- SolidHand
Table of Contents
SolidHand AL01M01 Monitor and Laptop Stand
Specifications
- Model: SolidHand-Al01M01
- Material: Aluminum
- Color: Silver
- Dimensions: 15.7 x 9.8 x 2.5 inches
- Weight Capacity: Up to 22 lbs
Product Information
The SolidHand-Al01M01 Monitor and Laptop Stand is designed to elevate your monitor or laptop for better ergonomics and improved viewing angles. Made from high-quality aluminum, this stand is sturdy and durable, capable of supporting up to 22 lbs. Its sleek silver finish adds a modern touch to your workspace.
Product Usage Instructions
Kit Contents:
Before starting the installation process, ensure that all the components are included in the kit. The package should contain the following:
- Monitor and Laptop Stand
- Installation Screws
- Instruction Manual
Features:
- Elevates monitor or laptop to eye level for improved posture
- Non-slip silicone pads to keep devices in place
- Cable management system to keep cords organized
- Sleek and modern design
Installation Tips:
Before installing the stand, ensure that your desk surface is clean and free of dust. Position the stand where you want your monitor or laptop to be placed, ensuring it is stable and secure.
Installation:
- Place the stand on a flat surface.
- Adjust the stand to your desired height and angle.
- Secure the monitor or laptop on the stand using the non-slip silicone pads.
- Organize cables using the cable management system for a clutter-free workspace.
Frequently Asked Questions
Q: Can this stand support dual monitors?
A: The SolidHand-Al01M01 is designed to support a single monitor or laptop. For dual monitor setups, you may need to purchase an additional stand.
Q: Is this stand compatible with all monitor sizes?
A: The stand is suitable for most monitors and laptops up to 22 lbs. Please check the dimensions of your device to ensure compatibility.
Specification
- Warranty: 1 year
- Color: matte black
- Construction material: steel, plastic
- Surface finish: powder coating
- Number of monitors: 1
- Min. monitor diagonal: 17″
- Max. monitor diagonal: 32″
- VESA standard: 75×75, 100×100
- Laptop size: 10″ – 15,6″
- Monitor weight: 9 kg
- Laptop weight: 4 kg
- Arm rotation range: +90° ~ -90°
- Monitor rotation range: +180° ~ -180°
- Monitor tilt range: +45° ~ -45°
- Max arm reach: 376 mm
- Pole height: 407 mm
- Handle dimensions: 959 x 319 x 561 mm
- Package dimensions: 440 x 290 x 120 mm
- Weight of the device: 4.86 kg
- Weight of handle with packaging: 5.6 kg
Kit contents
- Monitor mount,
- screws and mounting washers,
- user manual.
Features
- Number of monitors to be mounted: 1
- Number of laptops to be mounted: 1
- Arm rotation range: +90° ~ -90°
- Monitor weight: 9 kg
- Laptop weight: 4 kg
Installation tips
CAUTION: Using the product with a load greater than the indicated allowable load may lead to instability, resulting in possible injury.
- Please strictly follow the installation instructions. Improper installation may cause damage or serious personal injury.
- Use proper safety equipment and proper tools. This product should only be installed by professionals.
- Ensure that the supporting surface will safely support the total weight of the equipment and all included mounting hardware and components.
- Use the included mounting screws and DO NOT over tighten the mounting screws.
- The product contains small parts that may pose a choking hazard if swallowed. Keep these components away from children.
- This product is intended for indoor use only. Using this product outdoors may lead to product failure and personal injury.
- IMPORTANT: Make sure you have received all parts according to the component list before installation. If any parts are missing or defective, please contact us.
Installation
